PRODUCT DATASHEET Strada series last update 11/8/2015 DETAILS Product Number C13508_STRADA-SQ-T2 Family Strada Type Lens Color clear Diameter 25 x 25 mm Height 8,6 mm Style square Optic Material PMMA Holder Material Fastening pin, glue, screw Status production ready ROHS Compliant Yes Date Updated 11/08/2015 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector MK-R Asymmetric degAsymmetric 94 % 0.600 - XM-L2 sim: AsymmetricAsymmetric - - - MHB-A/B sim: AsymmetricAsymmetric - - - XHP50 Asymmetric degAsymmetric 94 % 0.710 - LUXEON M/MX Asymmetric degAsymmetric 93 % 0.700 - LUXEON MZ Asymmetric degAsymmetric 94 % 1.270 - NS9x383 Asymmetric degAsymmetric 94 % 1.100 - NFMW48xA Asymmetric degAsymmetric 94 % 0.830 - Duris S8 sim: AsymmetricAsymmetric sim: 92 % - - January 26th 2018 9:41 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D 21.5 c/c 4 4 25.4 2 c/c 3. 3 Bottom view Isometric view Tape 2 0.15 8.6 3 Detail A A 2 Front view 25 25 5 2 2 Top view 30 Beam direction c/c Minimum spacing Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE STRADA-SQ-T2 Datasheet SIZE A4 SCALE D 1 PART NUMBER 3:2 WEIGHT - SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.