JSPQ-80+ JSPQ-80 Surface Mount Power Splitter/Combiner 2 Way-90° 50Ω Maximum Ratings Operating Temperature Storage Temperature 10 to 80 MHz Features -55°C to 100°C Power Input (as a splitter) Internal Dissipation 1W max. +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications 0.125W max. Applications Permanent damage may occur if any of these limits are exceeded. • HF/VHF • radio communications • instrumentation Pin Connections SUM PORT 1 PORT 1 (0°) 7 PORT 2 (+90°) GROUND CASE STYLE: BK276 • low insertion loss, 0.45 dB typ. • excellent isolation, 44 dB typ. • aqueous washable -40°C to 85°C Electrical Specifications 8 2,3,4,5,6,9,10,11,12,13,14 Outline Drawing FREQ. RANGE (MHz) ISOLATION (dB) fL-fU Typ. Min. 10-80 44 INSERTION LOSS (dB) Avg. of Coupled Outputs ABOVE 3 dB PHASE UNBALANCE (Degrees) AMPLITUDE UNBALANCE (dB) Typ. Max. Max. Max. 6 0.6 30 0.45 1.4 Typical Performance Data Frequency (MHz) PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .450 11.43 B .803 20.40 C --- D .100 2.54 H .047 1.19 J .065 1.65 K .065 1.65 L .470 11.94 E .250 6.35 F .102 2.59 G .100 2.54 Total Loss1 (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR 1 VSWR 2 S-1 S-2 10.00 14.00 18.00 24.00 30.00 3.39 3.43 3.47 3.53 3.60 3.30 3.31 3.32 3.37 3.43 0.09 0.12 0.14 0.16 0.17 42.13 43.44 45.30 48.41 51.93 90.42 89.83 89.52 89.99 90.81 1.10 1.08 1.07 1.09 1.12 1.17 1.10 1.06 1.09 1.15 1.20 1.12 1.03 1.09 1.21 36.00 41.00 44.00 47.00 50.00 3.66 3.70 3.73 3.75 3.79 3.50 3.55 3.57 3.59 3.62 0.16 0.15 0.16 0.16 0.17 51.78 52.57 52.89 51.91 50.75 91.44 91.62 91.62 91.51 91.47 1.15 1.19 1.21 1.22 1.24 1.22 1.27 1.29 1.32 1.35 1.31 1.38 1.41 1.45 1.47 56.00 64.00 70.00 74.00 80.00 3.86 3.94 3.99 4.02 4.07 3.68 3.72 3.72 3.73 3.75 0.18 0.22 0.27 0.29 0.32 48.51 44.54 42.59 41.55 40.38 90.90 90.12 89.31 88.65 87.72 1.26 1.29 1.32 1.34 1.36 1.40 1.48 1.53 1.57 1.62 1.51 1.52 1.52 1.51 1.49 1. Total Loss = Insertion Loss + 3dB splitter loss. wt grams 3.0 JSPQ-80 TOTAL LOSS 4.8 60 4.0 3.6 3.2 2.8 10 24 38 JSPQ-80 ISOLATION S-2(dB) 4.4 ISOLATION (dB) TOTAL LOSS (dB) S-1(dB) Demo Board MCL P/N: TB-217 Suggested PCB Layout (PL-099) Amplitude Unbalance (dB) 52 66 80 FREQUENCY (MHz) 56 52 48 44 40 10 24 38 52 66 80 FREQUENCY (MHz) JSPQ-80 PHASE UNBALANCE electrical schematic PHASE UNBALANCE (Deg.) 92 91 90 89 88 87 10 24 38 52 66 80 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. D M151107 JSPQ-80 LC/TD/CP/AM 150818 Page 1 of 1