2132 Series HIGH VOLTAGE POWER SUPPLIES FEATURES y y y y • y y y y Compact Size Cost Effective Reliable Solid State Design Maintenance Free Totally Encapsulated Automatic Over Current Shutdown and Recovery UL Recognized Versions available RoHS versions available Formerly CS2132 Series TYPICAL ELECTRICAL SPECIFICATIONS TYPICAL APPLICATIONS y y y y Ionizers Table Top Air Cleaners Laser Start-up Circuits EOS / ESD Anti Static Equipment y y y y DESCRIPTION The 2132 series of unregulated solid state power supplies is designed for ionizers, table top air cleaners, laser (startup) circuits, EOS / ESD antistatic equipment and other equipment requiring reliable, compact, economical, high voltage power supplies. The 2132 series is available with either a positive or a negative output. There are two basic designs: 8 kVDC or 12 kVDC output. Other output voltages are available. . y y TYPICAL MECHANICAL SPECIFICATIONS y y OPTIONS y Input ground wire y Control wires (requires a 2 watt, potentiometer, not supplied) y "Power-On" indicating light y Input to output isolation Custom voltages and housings are also available. Consult factory for additional information. Input Voltage: 120 VAC (± 10%), 50/60 Hz Output Voltage: 8 or 12 kVDC Output Current: 1-5 µA typical Output Regulation: Unregulated, see Typical V-I Curve Load: Operates into any load condition, capacitive, resistive, inductive, or no load. Can withstand arcing and short circuits. y y y Encapsulant: Filled Epoxy (UL94V-0 Rated) Mounting: Cable-ties, glue, epoxy, RTV, or silicon. If glued, recommend glue be applied to two surfaces. Primary Wires: 22 AWG PVC, 600 V, UL Style 1015, 105ºC, 2 wire or 3 wire available High Voltage Wires: 22 AWG, 15 KVDC, UL Style 3239, 105ºC Temperature Rating: Operating 0º to +60ºC Storage -40º to +85ºC NOTICE: This power supply should never be mounted directly to a metal surface. 3227 Skylane Drive Carrollton, TX 75006 972-248-7691 Specifications subject to change without prior notification www.hvpsi.com Rev. 1 2132 Series HIGH VOLTAGE POWER SUPPLIES Input Voltage 120 VAC 120 VAC 120 VAC 120 VAC Model ACN2132L8 ACP2132L8 ACN2132L12 ACP2132L12 (1) Formerly CS2132 Series Input Frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz Output Voltage(1) 8 kVDC neg 8 kVDC pos 12 kVDC neg 12 kVDC pos Output voltages shown above are minimum DC @ 1 µA 2132 HVPSI DALLAS TX YYMM 2132 SERIES TYPICAL V-I OUTPUT CURVE (Input 120VAC) 14 HV OUTPUT (kVDC) 12 10 8 6 4 2 0 0 2 4 6 8 10 12 Iout (uA) 3227 Skylane Drive Carrollton, TX 75006 972-248-7691 www.hvpsi.com Rev. 3 Specifications subject to change without prior notification