IN-S42AT series Top View SMD LED 0402 PCB Type Features • 0402 0.45mm SMD LED • High Brightness • AlInGaP / InGaN Technology • Small package • High reliability • Clear Lens Description The IN-S42AT series is a popular low profile 0402 package with versatile design capabilities. It is a PCB type molding style LED which can be used in various applications. Recommended Solder Pattern Applications • Consumer Electronics • Wearables • Automobile After Market • Industrial Equipment Figure 1. IN-S42AT Solder Pattern Package Dimensions in mm Figure 2. IN-S42AT Package Dimensions Inolux Corporation Proprietary & Confidential Page 1 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Absolute Maximum Rating at 25oC (Note 1) Product Emission Color Pd (mW) IF (mA) IFP* (mA) VR (V) TOP (oC) IN-S42ATYG Yellow Green 78 25 100 5 -30 C~+80 C IN-S42ATY Yellow 78 25 100 5 -30 C~+80 C IN-S42ATA Amber 78 25 100 5 -30 C~+80 C IN-S42ATR Red 78 25 100 5 -30 C~+80 C IN-S42ATB Blue 100 25 100 5 -30 C~+80 C IN-S42ATG Green 100 25 100 5 -30 C~+80 C IN-S42ATUW White 100 25 100 5 -30 C~+80 C TST (oC) o o -40 C~+85 C o o o o -40 C~+85 C o o o o -40 C~+85 C o o o o -40 C~+85 C o o o o -40 C~+85 C o o o o -40 C~+85 C o o o o -40 C~+85 C o o Notes 1. Condition for IFP is pulse of 1/10 duty and 0.1msec width ESD Precaution ATTENTION: Electrostatic Discharge (ESD) protection The symbol above denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based chips is necessary even though they are relatively safe in the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and InGaN based chips are STATIC SENSITIVE devices. ESD precaution must be taken during design and assembly. If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process. Please be advised that normal static precautions should be taken in the handling and assembly of this device to prevent damage or degradation which may be induced by electrostatic discharge (ESD). Inolux Corporation Proprietary & Confidential Page 2 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Electrical Characteristics T A = 25°C (Note 1) VF(V) Product Emission Color IN-S42ATYG Yellow Green λ(nm) IF(mA) Viewing Angle I*V(mcd) typ. max λD λP △λ 2θ1/2 typ. 20 1.9 2.6 572 575 - 130 28.5 IN-S42ATY Yellow 20 2.0 2.6 592 593 - 130 145 IN-S42ATA Amber 20 2.1 2.6 605 610 - 130 145 IN-S42ATR Red 20 2.1 2.6 631 645 - 130 90 IN-S42ATB Blue 20 3.1 4.0 470 468 - 120 100 IN-S42ATG Green 20 3.3 4.0 525 523 - 130 450 IN-S42ATUW White 20 3.1 4.0 X=0.295 Y=0.30 - - 130 600 Notes 1. Performance guaranteed only under conditions listed in above tables. Inolux Corporation Proprietary & Confidential Page 3 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Chromaticity Bin (for White only) BIN R27 R29 R31 CIE X Y X Y X Y Top 0.275 0.27 0.285 0.29 0.295 0.31 Inolux Corporation Proprietary & Confidential Right 0.285 0.28 0.295 0.3 0.305 0.32 Bottom 0.305 0.28 0.315 0.3 0.325 0.32 Left 0.295 0.27 0.305 0.29 0.315 0.31 BIN R28 R30 Page 4 CIE X Y X Y Top 0.28 0.28 0.29 0.3 Right 0.29 0.29 0.3 0.31 Bottom 0.31 0.29 0.32 0.31 Left 0.3 0.28 0.31 0.3 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Typical Characteristic Curves – YG, Y, A, R Inolux Corporation Proprietary & Confidential Page 5 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Typical Characteristic Curves – B, G, W Inolux Corporation Proprietary & Confidential Page 6 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Typical Characteristic Curves – Radiation Pattern Ordering Information Product Technolog Test Current Emission Color y IF (mA) Forward Luminous Intensity Voltage IV (mcd) VF (V) (Typ.) (Typ.) Orderable Part Number IN-S42ATYG Yellow Green AllnGaP 20 36 1.9 IN-S42ATYG IN-S42ATY Yellow AllnGaP 20 90 2.0 IN-S42ATY IN-S42ATA Amber AllnGaP 20 90 2.1 IN-S42ATA IN-S42ATR Red AllnGaP 20 90 2.1 IN-S42ATR IN-S42ATB Blue InGaN 20 100 3.1 IN-S42ATB IN-S42ATG Green InGaN 20 360 3.3 IN-S42ATG IN-S42ATUW White InGaN 20 600 3.1 IN-S42ATUW Inolux Corporation Proprietary & Confidential Page 7 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Label Specifications Inolux P/N: I N - S Material Inolux SMD 4 2 Package S = PCB Type A T Variation Orientation 42A = 1.0 x 0.5 x 0.45mm X T = Top Mount Current (Blank) = 20mA Lens Color (Blank) = Clear U = Diffused R=645m A=610nm Y=593nm YG=575nm G=523nm B=468nm W=White 5=5mA - X X X X Customized Stamp-off Lot No.: Z Internal Tracker Inolux Corporation Proprietary & Confidential 2 0 1 7 Year (2017, 2018, …..) Page 8 01 24 001 Month Date Serial April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Packaging Information: 5000pcs Per Reel Tape Dimension Reel Dimension Inolux Corporation Proprietary & Confidential Page 9 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Packing Dimension Inolux Corporation Proprietary & Confidential Page 10 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Dry Pack All SMD optical devices are MOISTURE SENSITIVE. Avoid exposure to moisture at all times during transportation or storage. Every reel is packaged in a moisture protected anti-static bag. Each bag is properly sealed prior to shipment. Upon request, a humidity indicator will be included in the moisture protected anti-static bag prior to shipment. The packaging sequence is as follows: Reflow Soldering • Recommended tin glue specifications: melting temperature in the range of 178~192 OC • The recommended reflow soldering profile is as follows (temperatures indicated are as measured on the surface of the LED resin): Lead-free Solder Profile Inolux Corporation Proprietary & Confidential Page 11 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Precautions • • • • • • Avoid exposure to moisture at all times during transportation or storage. Anti-Static precaution must be taken when handling GaN, InGaN, and AlInGaP products. It is suggested to connect the unit with a current limiting resistor of the proper size. Avoid applying a reverse voltage. Avoid operation beyond the limits as specified by the absolute maximum ratings. Avoid direct contact with the surface through which the LED emits light. If possible, assemble the unit in a clean room or dust-free environment. Reworking • • • Rework should be completed within 5 seconds under 260 OC. The iron tip must not come in contact with the copper foil. Twin-head type is preferred. Cleaning Following are cleaning procedures after soldering: • An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended. • Temperature x Time should be 50oC x 30sec. or <30oC x 3min • Ultra sonic cleaning: < 15W/ bath; bath volume ≤ 1liter • Curing: 100 OC max, <3min Cautions of Pick and Place • Avoid stress on the resin at elevated temperature. • • Avoid rubbing or scraping the resin by any object. Electro-static may cause damage to the component. Please ensure that the equipment is properly grounded. Use of an ionizer fan is recommended. Inolux Corporation Proprietary & Confidential Page 12 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Reliability Item Precondition Frequency/ lots/ samples/ failures For all reliability monitoring tests according to JEDEC Level 2 1Q/ 1/ 22/ 0 Solderability Standards Reference J-STD-020 CNS-554 1.) Baking at 85°C for 24hrs 2.) Moisture storage at 85°C/ 60% R.H. for 168hrs Accelerated aging 155°C/ 24hrs Tinning speed: 2.5+0.5cm/s Tinning: A: 215°C/ 3+1s or B: 260°C/ 10+1s Dipping soldering terminal only Soldering bath temperature A: 260+/-5°C; 10+/-1s B: 350+/-10°C; 3+/-0.5s 1.) Precondition: 85°C baking for 24hrs 85°C/ 60%R.H. for 168hrs 2.) Tamb25°C; IF=20mA; duration 1000hrs Tamb: 85°C Humidity: 85% R.H., IF=5mA Duration: 1000hrs Tamb: 55°C IF=20mA Duration: 1000hrs Tamb25°C, If=20mA,, Ip=100mA, Duty cycle=0.125 (tp=125μs,T=1sec) Duration 500hrs) A cycle: -40 degree C 15min; +85 degree C 15min Thermal steady within 5 min.. 300 cycles 2 chamber/ Air-to-air type 60+3°C 90+5/-10% R.H. for 500hrs 100+10°C for 500hrs CNS-6118 -40+5°C for 500hrs JESD22-B102-B And CNS-5068 CNS-5067 Resistance to soldering heat 1Q/ 1/ 40/ 0 CNS-11829 Operating life test High humidity, 1Q/ 1/ 45/ 0 high temperature bias 1Q/ 1/ 20 High temperature bias JESD-A101-B IN specs. 1Q/ 1/ 40/ 0 Pulse life test 1Q/ 1/ 76/ 0 Temperature cycle High humidity 1Q/ 1/ 40/ 0 storage test High temperature 1Q/ 1/ 40/ 0 storage test Low temperature 1Q/ 1/ 40/ 0 storage test Inolux Corporation Proprietary & Confidential Conditions JESD-A104-A IEC 68-2-14, Nb CNS-6117 Page 13 April 25, 2017 www.inolux-corp.com IN-S42AT series Top View SMD LED 0402 PCB Type Revision History Changes since last revision Initial Release Format Update Page Version No. 1.0 1.1 Revision Date 02-07-2017 04-25-2017 DISCLAIMER INOLUX reserves the right to make changes without further notice to any products herein to improve reliability, function or design. INOLUX does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY INOLUX’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of INOLUX or INOLUX CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Inolux Corporation Proprietary & Confidential Page 14 April 25, 2017 www.inolux-corp.com