Lumileds L1T2-5085000000000 Extreme efficacy and best performance Datasheet

Illumination
LUXEON TX
Extreme efficacy and best performance
LUXEON TX is designed to deliver high efficacy with high flux density to
enable tight beam control in directional and high lumen applications.
With Freedom from Binning and leading performance, LUXEON TX
LEDs are specified, targeted and tested hot, at real world operating
temperatures, 85°C, to ensure in-application performance. LUXEON TX
LEDs allow system optimization by blending the perfect combination of
high efficacy and low system cost, while tight correlated color temperature
ensures consistency in system color point.
Features and Benefits
Primary Applications
Maximum drive current of 1.5A
Downlights
High lumen package and compact source size for design flexibility
and reduced LED count
High Bay & Low Bay
Freedom from Binning with 3- and 5-step MacAdam ellipse
Lamps
Exceeds ENERGY STAR® lumen maintenance requirements
Outdoor
70, 80 and 90CRI minimum and full CCT range available
Spotlights
RoHS
DS133 LUXEON TX Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved.
No. E352519
COMPLIANT
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON TX LEDs are tested and binned with a DC drive current of 700mA at a junction temperature, Tj, of 85ºC.
Part Number Nomenclature
Part numbers for LUXEON TX follow the convention below:
L 1 T 2 – A A B B C 0 0 0 0 D D D 0
Where:
A A
-
designates nominal ANSI CCT (27=2700K, 30=3000K, 35=3500, 40=4000, 50=5000, 57=5700, 65=6500)
B B
-
designates minimum CRI performance (70=70CRI, 80=80CRI, 85=85CRI, 90=90CRI)
C
-
designates color defintion (3=3 SDCM and 5=5 SDCM)
D D D -
designates minimum luminous flux level at test conditions (210=210 lumens, etc.)
Therefore, the following part number is used for a LUXEON TX 3-step MacAdam ellipse, 3000K 80CRI with a minimum luminous
flux of 210 lumens:
L 1 T 2 – 3 0 8 0 3 0 0 0 0 0 2 1 0 0
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON TX is
compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON TX at 700mA and 350mA, Tj=85ºC.
Typical
Luminous
Efficacy (lm/W)
Typical
Luminous
Efficacy (lm/W)
Typical
Luminous
Flux (lm)
270
136
150
155
L1T2-3070000000000
280
295
148
160
164
L1T2-4070000000000
70
280
295
148
160
164
L1T2-5070000000000
70
280
295
148
160
164
L1T2-5770000000000
6500K
70
280
295
148
160
164
L1T2-6570000000000
2700K
80
200
216
110
118
124
L1T2-2780000000000
3000K
80
210
227
116
124
131
L1T2-3080000000000
3500K
80
220
238
121
130
137
L1T2-3580000000000
4000K
80
230
247
126
136
143
L1T2-4080000000000
5000K
80
230
247
126
136
143
L1T2-5080000000000
2700K
85
170
186
95
102
108
L1T2-2785000000000
3000K
85
180
197
101
108
114
L1T2-3085000000000
3500K
85
190
208
106
114
120
L1T2-3585000000000
4000K
85
200
217
111
120
127
L1T2-4085000000000
5000K
85
200
217
111
120
127
L1T2-5085000000000
2700K
90
160
175
89
96
101
L1T2-2790000000000
3000K
90
170
188
96
103
109
L1T2-3090000000000
5700K
90
200
213
109
117
123
L1T2-5790000000000
Luminous Flux [1] (lm)
Nominal
CCT
Minimum
CRI [1, 2]
Minimum
3000K
70
250
4000K
70
5000K
5700K
Typical
700mA
Part Number
350mA
Notes for Table 1:
1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements.
2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
Optical Characteristics
Table 2. Optical characteristics for LUXEON TX at 700mA, Tj=85ºC.
Part Number
Typical Total Included Angle [1]
Typical Viewing Angle [2]
L1T2-xxxx000000000
160°
120°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
3
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON TX at 700mA, Tj=85ºC.
Part Number
Forward Voltage [1] (Vf)
Minimum
Typical
MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage (mV/°C) [2]
2.5
2.8
3.0
-1.6
L1T2-xxxx000000000
Typical Thermal
RESISTANCE—JUNCTION
TO SOLDER PAD (°C/W)
3.0
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 110°C.
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON TX.
Parameter
DC Forward Current
Maximum Performance
[1, 2]
Peak Pulsed Forward Current
[1, 3]
LED Junction Temperature [1] (DC & Pulse)
1050mA
1200mA
1500mA
1200mA
1350mA
1650mA
150°C
135°C
85°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 3B
Operating Case Temperature [1]
-40°C to 135°C
LED Storage Temperature
-40°C to 135°C
Soldering Temperature
JEDEC 020c 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse)
[4, 5]
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum
allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding
maximum junction temperature.
3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.
4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse
voltage does not exceed 5V and the reverse current is less than 220uA
5. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition.
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
4
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1a. Typical normalized power vs. wavelength for L1T2-xx70000000000 at 700mA, Tj=85ºC.
Figure 1b. Typical normalized power vs. wavelength for L1T2-xx80000000000 at 700mA, Tj=85ºC.
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
5
Figure 1c. Typical normalized power vs. wavelength for L1T2-xx90000000000 at 700mA, Tj=85ºC.
Light Output Characteristics
Figure 2. Typical normalized light output vs. junction temperature for LUXEON TX at 700mA.
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
6
Figure 3. Typical normalized light output vs. forward current for LUXEON TX, Tj=85ºC.
Forward Current Characteristics
Figure 4. Typical forward current vs. forward voltage for LUXEON TX, Tj=85ºC.
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
7
Radiation Pattern Characteristics
Figure 5. Typical radiation pattern for LUXEON TX at 700mA, Tj=85ºC.
Figure 6. Typical polar radiation pattern for LUXEON TX at 700mA, Tj=85ºC.
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
8
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
LUXEON TX LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:
A B C D
A
–
designates luminous flux bin (example: M=210 to 220 lumens, R=250 to 260 lumens)
B
–
designates correlated color temperature bin (1=6500K, 2=5700K, 3=5000K, 5=4000K, 6=3500K,
7=3000K, 8=2700K)
C
–
designates SDCM bin (3=3-step MacAdam ellipse, 5=5-step MacAdam ellipse)
D
–
designates forward voltage bin (example: P=2.50 to 2.75V, R=2.75 to 3.00V)
Therefore, a LUXEON TX with a lumen range of 210 to 220, color bin of 7 for 3000K parts, 3-step MacAdam ellipse 80CRI and a
forward voltage range of 2.50 to 2.75 has the following CAT code:
M 7 3 P
Luminous Flux Bins
Table 5 lists the standard luminous flux bins for LUXEON TX emitters. Although several bins are outlined, product availability in a
particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Luminous flux bin definition for LUXEON TX.
Bin
Luminous Flux [1] (lm)
Minimum
Maximum
G
160
170
H
170
180
J
180
190
K
190
200
L
200
210
M
210
220
N
220
230
P
230
240
Q
240
250
R
250
260
S
260
270
T
270
280
U
280
290
V
290
300
W
300
310
Notes for Table 5:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
9
Color Bin Definitions
0.430
NOTE: Color bin space illustration
for 2700K, 3000K & 3500K.
For CCT above 4000K, the ellipse
centers are all above BBL line.
0.425
0.420
Bin 5A
CIE 1931 y
0.415
Bin 3U
Bin 5D
0.410
Bin 5B
Bin 3L
0.405
Bin 5C
0.400
0.395
0.390
0.445
0.450
0.455
0.460
0.465
0.470
0.475
CIE 1931 x
Figure 7. Color space definition for LUXEON TX.
Figure 8. 3- and 5-step MacAdam ellipse illustration for Table 6.
Table 6. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON TX.
Nominal CCT
Color Space
Center Point [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, Θ
2700K
Single 3-step MacAdam ellipse
(0.4578, 0.4101)
0.00810
0.00420
53.7°
3000K
Single 3-step MacAdam ellipse
(0.4338, 0.4030)
0.00834
0.00408
53.2°
3500K
Single 3-step MacAdam ellipse
(0.4073, 0.3917)
0.00927
0.00414
54.0°
4000K
Single 3-step MacAdam ellipse
(0.3818, 0.3797)
0.00939
0.00402
53.7°
5000K
Single 3-step MacAdam ellipse
(0.3447, 0.3553)
0.00822
0.00354
59.6°
2700K
Single 5-step MacAdam ellipse
(0.4578, 0.4101)
0.01350
0.00700
53.7°
3000K
Single 5-step MacAdam ellipse
(0.4338, 0.4030)
0.01390
0.00680
53.2°
3500K
Single 5-step MacAdam ellipse
(0.4073, 0.3917)
0.01545
0.00690
54.0°
4000K
Single 5-step MacAdam ellipse
(0.3818, 0.3797)
0.01565
0.00670
53.7°
5000K
Single 5-step MacAdam ellipse
(0.3447, 0.3553)
0.01370
0.00590
59.6°
5700K
Single 5-step MacAdam ellipse
(0.3287, 0.3417)
0.01243
0.00533
59.1°
6500K
Single 5-step MacAdam ellipse
(0.3123, 0.3282)
0.01115
0.00475
58.6°
Notes for Table 6:
1. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates in the CIE 1931 color space.
Table 7. Correlated color temperature bin definitions for LUXEON TX.
Bin
CCT
1
6500K
2
5700K
3
5000K
5
4000K
6
3500K
7
3000K
8
2700K
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
10
Table 8. MacAdam ellipse color bin definitions for LUXEON TX.
Bin
SDCM
3
3-step MacAdam ellipse (80, 85, 90CRI)
U
3-step MacAdam ellipse (80, 85, 90CRI)
L
3-step MacAdam ellipse (80, 85, 90CRI)
5
5-step MacAdam ellipse (70CRI)
A
5-step MacAdam ellipse (80, 85, 90CRI)
B
5-step MacAdam ellipse (80, 85, 90CRI)
C
5-step MacAdam ellipse (80, 85, 90CRI)
D
5-step MacAdam ellipse (80, 85, 90CRI)
Forward Voltage Bins
Table 9. Forward voltage bin definitions for LUXEON TX.
Forward Voltage [1] (Vf)
Bin
Minimum
Maximum
P
2.50
2.75
R
2.75
3.00
X
2.65
2.85
Y
2.85
3.00
Notes for Table 9:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
Mechanical Dimensions
Figure 9. Mechanical dimensions for LUXEON TX.
Notes for Figure 9:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. Do not handle the device by the dome. Excessive force on the dome may damage the dome itself or the interior of the device.
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
11
Reflow Soldering Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
TL
Temperature
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 10.
Table 10. Reflow profile characteristics for LUXEON TX.
PROFILE FEATURE
Lead-Free Assembly
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 120 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 11. Moisture sensitivity levels for LUXEON TX.
level
1
Floor Life
Soak Requirements Standard
TIme
Conditions
Time
Conditions
Unlimited
≤30°C / 85% RH
168 Hours +5 / -0
85°C / 85% RH
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
12
Solder Pad Design
Center of package
LUXEON TX package and pads outline
Copper
Stencil Pattern
Solder Mask Opening
LUXEON TX package center
Figure 11. Recommended PCB solder pad layout for LUXEON TX.
Notes for Figure 11:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
13
Packaging Information
Pocket Tape Dimensions
-LEADER400mm MIN OF COVER TAPE
MIN 100mm CARRIER TAPE WITH EMPTY
POCKETS SEALED WITH COVER TAPE
-TRAILER100mm MIN OF EMPTY CARRIER
TAPE SEALED WITH COVER TAPE
-LOADED POCKETS-
J
DIRECTION OF FEED
1.00±0.05
G
8.00±0.10
E
H
L
1.75±0.10
G
SECTION G-G
SCALE 2 : 1
+0.30
12.00 - 0.10
E
1.50
2.00±0.05
4.00±0.10
5.50±0.05
F
SECTION E-E
SCALE 2 : 1
2.40
3.95±0.10
3.95±0.10
2.40±0.10
DETAIL H
SCALE 6 : 1
0.29±0.02
3.00±0.10
DETAIL F
SCALE 6 : 1
8 MAX
12 MAX
Figure 12. Tape dimensions for LUXEON TX.
Notes for Figure 12:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
14
Reel Dimensions
1.37
-DEVICE OREINTATIONNON-FIDUCIAL CORNER
LOCATED AS SHOWN
1.53
R0.50
2.52
DETAIL J
SCALE 6 : 1
DETAIL L
SCALE 6 : 1
16.8mm OUTSIDE WIDTH
12.4mm INSIDE WIDTH
330.00 REEL DIAMETER
13.00mm ARBOR
HOLE DIAMETER
COVER TAPE
DIRECTION OF FEED
CARRIER TAPE
TAPE REEL
Figure 13. Reel dimensions for LUXEON TX.
Notes for Figure 13:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS106 LUXEON T 20130630 ©2013 Philips Lumileds Lighting Company.
DS133 LUXEON TX Product Datasheet 20170114 ©2017 Lumileds Holding B.V. All rights reserved.
13
15
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
To learn more about our portfolio of light engines, visit lumileds.com.
©2017 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
DS133 LUXEON TX
Product Datasheet 20170114
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or
any other damages, direct, indirect or consequential, resulting from the use of the provided
information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to
provide the most accurate information and data, the materials and services information and data
are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees
the contents and correctness of the provided information and data. Lumileds Holding B.V. and its
affiliates reserve the right to make changes without notice. You as user agree to this disclaimer
and user agreement with the download or use of the provided materials, information and data.