CSD18532KCS www.ti.com SLPS361A – AUGUST 2012 – REVISED OCTOBER 2012 60-V, N-Channel NexFET™ Power MOSFETs Check for Samples: CSD18532KCS FEATURES 1 • • • • • • • • 2 PRODUCT SUMMARY Ultra Low Qg and Qgd Low Thermal Resistance Avalanche Rated Logic Level Pb Free Terminal Plating RoHS Compliant Halogen Free TO-220 Plastic Package TA = 25°C UNIT Drain to Source Voltage 60 V Qg Gate Charge Total (10V) 44 nC Qgd Gate Charge Gate to Drain RDS(on) Drain to Source On Resistance VGS(th) Threshold Voltage 6.9 nC VGS = 4.5V 4.2 mΩ VGS = 10V 3.3 mΩ 1.8 V ORDERING INFORMATION Device Package Media Qty Ship CSD18532KCS TO-220 Plastic Package Tube 50 Tube APPLICATIONS • • • TYPICAL VALUE VDS DC-DC Conversion Secondary Side Synchronous Rectifier Motor Control ABSOLUTE MAXIMUM RATINGS TA = 25°C DESCRIPTION The NexFET™ power MOSFET has been designed to minimize losses in power conversion applications. VALUE UNIT VDS Drain to Source Voltage 60 V VGS Gate to Source Voltage ±20 V Continuous Drain Current (Package limited), TC = 25°C 100 Continuous Drain Current (Silicon limited), TC = 25°C 169 Continuous Drain Current (Silicon limited), TC = 100°C 107 IDM Pulsed Drain Current (1) 179 A PD Power Dissipation 216 W TJ, TSTG Operating Junction and Storage Temperature Range –55 to 150 °C EAS Avalanche Energy, single pulse ID = 75A, L = 0.1mH, RG = 25Ω 281 mJ ID Figure 1. Top View A (1) Pulse duration ≤300μs, duty cycle ≤2% RDS(on) vs VGS GATE CHARGE 10 TC = 25°C Id = 100A TC = 125ºC Id = 100A 10 VGS - Gate-to-Source Voltage (V) RDS(on) - On-State Resistance (mΩ) 12 8 6 4 2 0 0 2 4 6 8 10 12 14 16 VGS - Gate-to- Source Voltage (V) 18 20 G001 ID = 100A VDS = 30V 8 6 4 2 0 0 5 10 15 20 25 30 35 Qg - Gate Charge (nC) 40 45 50 G001 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. NexFET is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2012, Texas Instruments Incorporated CSD18532KCS SLPS361A – AUGUST 2012 – REVISED OCTOBER 2012 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Static Characteristics BVDSS Drain to Source Voltage VGS = 0V, ID = 250μA IDSS Drain to Source Leakage Current VGS = 0V, VDS = 48V IGSS Gate to Source Leakage Current VDS = 0V, VGS = 20V VGS(th) Gate to Source Threshold Voltage VDS = VGS, ID = 250μA RDS(on) Drain to Source On Resistance gfs Transconductance 60 1.5 V 1 μA 100 nA 1.8 2.2 V 4.2 5.3 mΩ VGS = 10V, ID = 100A 3.3 4.2 mΩ VDS = 30V, ID = 100A 187 VGS = 4.5V, ID = 100A S Dynamic Characteristics Ciss Input Capacitance 3900 4680 pF Coss Output Capacitance Crss Reverse Transfer Capacitance 470 564 pF 11 14 RG pF Series Gate Resistance 1.3 2.6 Ω Qg Gate Charge Total (4.5V) 21 25 nC Qg Gate Charge Total (10V) 44 53 nC Qgd Gate Charge Gate to Drain Qgs Qg(th) Qoss Output Charge td(on) Turn On Delay Time tr Rise Time td(off) Turn Off Delay Time tf Fall Time VGS = 0V, VDS = 30V, f = 1MHz VDS = 30V, ID = 100A 6.9 nC Gate Charge Gate to Source 10 nC Gate Charge at Vth 7.3 nC 52 nC 7.8 ns VDS = 30V, VGS = 0V VDS = 30V, VGS = 10V, IDS = 100A, RG = 0Ω 5.3 ns 24.2 ns 5.6 ns Diode Characteristics VSD Diode Forward Voltage Qrr Reverse Recovery Charge trr Reverse Recovery Time ISD = 100A, VGS = 0V 0.8 VDS= 30V, IF = 100A, di/dt = 300A/μs 127 1 nC V 57 ns THERMAL CHARACTERISTICS (TA = 25°C unless otherwise stated) MAX UNIT RθJC Thermal Resistance Junction to Case PARAMETER 0.6 °C/W RθJA Thermal Resistance Junction to Ambient 62 °C/W 2 Submit Documentation Feedback MIN TYP Copyright © 2012, Texas Instruments Incorporated Product Folder Links: CSD18532KCS CSD18532KCS www.ti.com SLPS361A – AUGUST 2012 – REVISED OCTOBER 2012 TYPICAL MOSFET CHARACTERISTICS (TA = 25°C unless otherwise stated) Figure 2. Transient Thermal Impedance TEXT ADDED FOR SPACING 200 160 180 IDS - Drain-to-Source Current (A) IDS - Drain-to-Source Current (A) TEXT ADDED FOR SPACING 180 140 120 100 80 60 40 VGS =10V VGS =6.5V VGS =4.5V 20 0 0 0.5 1 VDS - Drain-to-Source Voltage (V) 1.5 VDS = 5V 160 140 120 100 80 60 TC = 125°C TC = 25°C TC = −55°C 40 20 0 0 G001 Figure 3. Saturation Characteristics 1 2 3 4 VGS - Gate-to-Source Voltage (V) Product Folder Links: CSD18532KCS G001 Figure 4. Transfer Characteristics Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated 5 3 CSD18532KCS SLPS361A – AUGUST 2012 – REVISED OCTOBER 2012 www.ti.com TYPICAL MOSFET CHARACTERISTICS (continued) (TA = 25°C unless otherwise stated) TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING 50000 Ciss = Cgd + Cgs Coss = Cds + Cgd Crss = Cgd ID = 100A VDS = 30V 10000 8 C − Capacitance (pF) VGS - Gate-to-Source Voltage (V) 10 6 4 1000 100 2 0 0 5 10 15 20 25 30 35 Qg - Gate Charge (nC) 40 45 10 50 0 10 20 30 40 50 VDS - Drain-to-Source Voltage (V) G001 Figure 5. Gate Charge TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING 12 RDS(on) - On-State Resistance (mΩ) VGS(th) - Threshold Voltage (V) ID = 250uA 2.3 2 1.7 1.4 1.1 0.8 0.5 −75 −25 25 75 125 TC - Case Temperature (ºC) TC = 25°C Id = 100A TC = 125ºC Id = 100A 10 8 6 4 2 0 175 0 2 G001 Figure 7. Threshold Voltage vs. Temperature TEXT ADDED FOR SPACING 18 20 G001 TEXT ADDED FOR SPACING VGS = 4.5V VGS = 10V ID =100A 1.8 1.5 1.2 0.9 0.6 0.3 −75 6 8 10 12 14 16 VGS - Gate-to- Source Voltage (V) 100 ISD − Source-to-Drain Current (A) 2.1 4 Figure 8. On-State Resistance vs. Gate-to-Source Voltage 2.4 Normalized On-State Resistance G001 Figure 6. Capacitance 2.5 −25 25 75 125 TC - Case Temperature (ºC) 175 TC = 25°C TC = 125°C 10 1 0.1 0.01 0.001 0.0001 0 0.2 0.4 0.6 0.8 VSD − Source-to-Drain Voltage (V) G001 Figure 9. Normalized On-State Resistance vs. Temperature 4 60 1 G001 Figure 10. Typical Diode Forward Voltage Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated Product Folder Links: CSD18532KCS CSD18532KCS www.ti.com SLPS361A – AUGUST 2012 – REVISED OCTOBER 2012 TYPICAL MOSFET CHARACTERISTICS (continued) (TA = 25°C unless otherwise stated) TEXT ADDED FOR SPACING TEXT ADDED FOR SPACING 100 10ms 100ms 1000 1s DC IAV - Peak Avalanche Current (A) IDS - Drain-to-Source Current (A) 5000 100 10 1 0.1 Single Pulse Typical RthetaJA =52ºC/W 0.01 0.01 0.1 1 10 VDS - Drain-to-Source Voltage (V) 100 TC = 25ºC TC = 125ºC 10 0.01 0.1 TAV - Time in Avalanche (mS) G001 Figure 11. Maximum Safe Operating Area 1 G001 Figure 12. Single Pulse Unclamped Inductive Switching TEXT ADDED FOR SPACING IDS - Drain- to- Source Current (A) 120 100 80 60 40 20 0 −50 −25 0 25 50 75 100 125 TC - Case Temperature (ºC) 150 175 G001 Figure 13. Maximum Drain Current vs. Temperature Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated Product Folder Links: CSD18532KCS 5 CSD18532KCS SLPS361A – AUGUST 2012 – REVISED OCTOBER 2012 www.ti.com MECHANICAL DATA KCS Package Dimensions Notes: 1. All linear dimensions are in inches 2. This drawing is subject to change without notice 3. Lead Dimensions are not controlled within "C" area 4. All lead dimensions apply before solder dip 5. The center lead is in electrical contact with the mounting tab 6. The chamfer at "F" is optional 7. Thermal pad contour at "G" optional with these dimensions 8. "H" Falls within JEDEC TO-220 variation AB, except minimum lead thickness, minimum exposed pad length, and maximum body length. Table 1. Pin Configuration 6 Position Designation Pin 1 Gate Pin 2 / Tab Drain Pin 3 Source Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated Product Folder Links: CSD18532KCS CSD18532KCS www.ti.com SLPS361A – AUGUST 2012 – REVISED OCTOBER 2012 REVISION HISTORY Changes from Original (August 2012) to Revision A Page • Changed the Transconductance TYP value From: 146 S To: 187 S ................................................................................... 2 • Changed RθJA From: MAX = 62°C/W To: MAX = 65°C/W .................................................................................................... 2 • Changed Figure 3 ................................................................................................................................................................. 3 Submit Documentation Feedback Copyright © 2012, Texas Instruments Incorporated Product Folder Links: CSD18532KCS 7 PACKAGE OPTION ADDENDUM www.ti.com 20-Dec-2012 PACKAGING INFORMATION Orderable Device Status (1) CSD18532KCS ACTIVE Package Type Package Pins Package Qty Drawing TO-220 KCS 3 50 Eco Plan Lead/Ball Finish (2) Pb-Free (RoHS Exempt) CU SN MSL Peak Temp Samples (3) (Requires Login) N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated