MA4P7464F-1072T Non Magnetic SMQ MELF PIN Diode V2 Features ♦ Non-Magnetic Package Suitable for MRI Applications ♦ Rectangular MELF SMQ Ceramic Package ♦ Hermetically Sealed ♦ Low Rs for Low Series Loss ♦ Long τL for Lower Intermodulation Distortion ♦ Low Cj for High Series Isolation ♦ High Average Incident Power Handling ♦ RoHS Compliant Description The MA4P7464F-1072T is a surface mountable PIN diode in a non-magnetic, Metal Electrode Leadless Faced (MELF) package. The device incorporates M/A-COM Technology Solutions time proven HIPAX technology to produce a low inductance ceramic package with no ribbons or whisker wires. Incorporated in the package is a hard glass passivated, CERMACHIP™ PIN chip that is full face bonded on both the cathode and anode to maximize surface area for the lowest electrical and thermal resistance. The package utilizes a non-magnetic plating process that provides for a package with extremely low permeability. The MA4P7464F-1072T has been comprehensively characterized both electrically and mechanically to ensure repeatable and predictable performance. The non-magnetic MA4P7464F-1072T is the electrical equivalent of its magnetic counterpart the MA4P7004F-1072T. Applications This diode is well suited for use in low loss, low distortion, high power switching circuits and can be used in high magnetic field environments at HF through UHF frequencies. The low thermal resistance of this device provides excellent performance at high RF power incident levels, up to 100 watts CW. This device is designed to meet the most demanding electrical and mechanical MRI environments. Designed for Automated Assembly These SMQ PIN diodes are designed for high volume tape and reel assembly. The rectangular package design provides for highly efficient automatic pick and place assembly techniques. The parallel flat surfaces are suitable for key jaw or vacuum pickup. All solderable surfaces are tin plated and compatible with reflow and vapor phase soldering methods. Absolute Maximum Ratings1 @ 25°C Parameter Absolute Maximum Operating Temperature -65 °C to +125°C Storage Temperature -65 °C to +150°C Diode Junction Temperature +175 °C Continuous Diode Mounting Temperature +265°C for 10 seconds RF C.W. Incident Power + 50 dBm C.W. Forward D.C. Current + 250 mA Reverse D.C. Voltage @ -10uA l - 400 V l 1. Exceeding these limits may cause permanent damage. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P7464F-1072T Non Magnetic SMQ MELF PIN Diode V2 Electrical Specifications @ +25 °C Parameter Symbol Condition Unit Value Forward Voltage (Maximum) VF IF = +100 mA 1.0 VDC Voltage Rating (Minimum) VR Ir = -10 uA l – 400 l VDC Total Capacitance (Maximum) CT -100 V @ 100 MHz 0.8 pF Series Resistance (Maximum) RS +100 mA @ 100 MHz 0.5 Ohms Parallel Resistance (Minimum) RP -10 V @ 100 MHz 75 K Ω Carrier Lifetime (Nominal) τL +6 mA / -10 mA @ (50% - 90% Voltage) 4.5 us I-Region Length (Nominal) μm - 100 μm C.W. Thermal Resistance (Maximum) θ - 20 °C/W Power Dissipation in Free Air (Maximum) W IF = +100 mA 2.5 W Power Dissipation (Maximum) PD IF = +100 mA 7.5 W Environmental Capability MELF devices are appropriate for use in industrial and military applications and can be screened to meet the environmental requirements of MIL-STD-750, MIL-STD-202 as well as other military standards. The table below lists some of the MIL-STD 750 tests the device is designed to meet. Test Method High Temperature 1. Exceeding these limits Storage may cause permanent damage. 1031 Description +150°C, for 340 Hours Temperature Shock 1051 -65°C to +150°C, 20 Cycles HTRB 1038 80% of rated VB, +150°C, for 96 Hours Moisture Resistance 1021 No Initial Conditioning, 85% RH, +85°C Gross Leak 1071 Cond. E Dye Penetrant Visual Vibration Fatigue 2046 20,000G’s, 60Hz, x, y, z axis Solderability 2026 Test Temperature = +245°C 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P7464F-1072T Non Magnetic SMQ MELF PIN Diode V2 Typical Electrical Performance @ +25°C MA4P7464F-1072T Rs vs I 1000 Rs_100 MHz Rs (Ohms) 100 Rs_1000 MHz 10 1 0.1 0.01 0.10 1.00 10.00 100.00 I ( mA ) M A 4 P 7 4 6 4 F -1 0 7 2 T R p v s V o lta g e 1 .0 0 E + 0 6 1 .0 0 E + 0 5 Rp (Ohms) 1500 M H z 1 .0 0 E + 0 4 1 .0 0 E + 0 3 1 .0 0 1 0 .0 0 1 0 0 .0 0 V o lta g e ( V ) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P7464F-1072T Non Magnetic SMQ MELF PIN Diode V2 Typical Electrical Performance @ +25°C M A 4 P 7 4 6 4 F -1 0 7 2 T C t v s V o lta g e 10 Ct (pF) 1500 M H z 1 100 M H z 0 .1 1 .0 0 1 0 .0 0 1 0 0 .0 0 V o lta g e ( V ) MA4P7464F-1072T Ls vs Frequency Ls (nH) 1 Ls_50 m A 0.1 100.0 1000.0 F ( M Hz ) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P7464F-1072T Non Magnetic SMQ MELF PIN Diode V2 Typical Non-Magnetic Performance Comparison of Magnetic Moment vs H Field for MA4P7400-1072T Non-Magnetic Series & MA4P1250-1072T Magnetic Devices 2.50E-02 Device Magnetic Moment (EMU) 2.00E-02 1.50E-02 MA4P1250-1072T Magnetic 1.00E-02 5.00E-03 0.00E+00 MA4P7400-1072T Non-Magnetic Series -5.00E-03 -1.00E-02 -1.50E-02 -2.00E-02 -2.50E-02 -1.0E+04 -8.0E+03 -6.0E+03 -4.0E+03 -2.0E+03 0.0E+00 2.0E+03 4.0E+03 6.0E+03 8.0E+03 1.0E+04 H Field ( Oersteads ) Typical Magnetic Properties of Non-Magnetic MA4P7464F-1072T Device vs. Conventional MA4P1250-1072T Magnetic Device Magnetic Property MA4P7464F-1072T Value MA4P1250-1072T Value Saturation Moment (EMU) @ H = HMAX Oersteads 2.3 x E-4 2.1 x E-2 Remanance Moment (EMU) @ H = 0 Oersteads 4.2 x E-8 7.1 x E-3 Coercivity (Oersteads) @ EMU = 0 Moment 1 59.2 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P7464F-1072T Non Magnetic SMQ MELF PIN Diode V2 Mechanical Outline 1072 MELF Surface Mount Package Circuit Pad Layout for MELF Diodes Package Style 1072 Dimension Dimension Inches Milimeters A 0.093 2.36 inches mm A 0.093 2.36 B 0.050 1.27 C 0.060 1.52 A B 0.050 1.27 C 0.060 1.52 B C B MELF Assembly Recommendations ♦ Devices may be soldered using standard 60Sn/40Pb or RoHS compliant solders. All solderable surfaces of MELF devices are tin plated 50 μM thick to ensure an optimum connection. ♦ For recommended Sn/Pb and RoHS soldering profiles See Application Note M538 on the M/A-COM Tech website. Ordering Information Part Number Package Quantity per Reel MA4P7464F-1072T Tape and Reel 1500pcs 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.