IES-1081 8 FE + 2 GE SFP Managed Switch -40 to 75C, DIN-rail Overview Resilient Ring Network High Reliability Management Transportation Application Safety LevelOne IES-1081 Industry Ethernet Switch provides 8 ports of 10/100Base-TX plus 2 ports of 1000Base SFP slots to enable high speed network at mission-critical environment. This device is designed to be mounted on an industry standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. Moreover, the SFP slots support pluggable modules that enabling you to choose from a variety of transceivers. All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. This device is certified by NEMA (National Manufacturers Association) TS2 Environmental requirements for the Traffic Control Equipment that withstand extreme temperatures, operating voltage and humidity fluctuation, vibration and shock commonly experienced in severe outdoor environments. Features - Complies with NEMA TS2 Environmental requirements for Traffic control equipment - Complies with EN50121-4 environmental requirement for Railway application - Supports α-ring and RSTP/MSTP/STP for Ethernet redundancy - IP Multicast Filtering through IGMP Snooping V1, V2 & V3 - Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP - IEEE802.1p QoS with four priority queues - MAC-based trunking and LACP - IEEE802.1x Security - Bandwidth Rate Control - Per-port programmable MAC address locking Supports Ring topology network providing simple installation and ultra fast network recovery performance, less than 15ms. Unlike much complex resilient topology, such as a redundant star, the Ring simplifies the network design and requires less cabling installation. In addition, fast network recovery time helps minimize system downtime. IES-1081 supports a variety of management features including: CLI via Console or Telnet; Graphic User Interface via Web Browser or Simple Network Management Protocol via SNMP tools. It provides better visibility and management of those critical assets. This device has been tested under UL508 standard for Industrial Control Equipment to endurance under test turn on and off 6,000 times while loaded, with no single failure. It’s highly reliability and safety measurement to ensure field hardened, especially for the harsh environment. - Up to 24 Static Secure MAC addresses per port - Port mirroring - NTP synchronization - DHCP Client/Server - RS-232 console, Telnet, SNMP V1, V2c & V3, RMON, Web Browser, and TFTP Management - 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - Full wire-speed forwarding rate - -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for functional operation @ -40°C to 85°C (-40°F to 185°F) Diagrams Unit: mm 60 145 125 Front Back Side Top/Buttom Specifications Environment Technology IEEE802.3 10BASE-T, IEEE802.3u 100BASETX/100BASE-FX, IEEE802.3ab 1000BASE-T, IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x, IEEE802.1p, IEEE802.1Q, IEEE802.1w, IEEE802.1x Standards Forward and Filtering Rate 14,880pps for 10Mbps 148,810pps for 100Mbps 1,488,100pps for 1000Mbps Packet Buffer Memory 2M bits Processing Type Store-and-Forward Half-duplex back-pressure and IEEE802.3x full-duplex Address Table Size 8192 MAC addresses Operating Temperature -40°C to 75°C (-40°F to 167°F) Storage Temperature -40°C to 85°C (-40°F to 185°F) Ambient Relative Humidity 5% to 95% (non-condensing) MTBF 52.54 years Tested @ -40°C to 85°C (-40°F to 185°F) Regulatory Approvals ISO Manufactured in an ISO9001 facility Safety UL508 EMI FCC Part 15, Class A EN61000-6-4 Power Input Input Voltage: 12 to 48VDC (Terminal Block); 12VDC (DC Jack) Power Consumption 11W Max. 0.92A @ 12VDC, 0.46A @ 24VDC Overload Current Protection Present Reverse Polarity Protection Present - EN55022 - EN61000-3-2 - EN61000-3-3 EN61000-6-2 EMS - EN61000-4-2 (ESD Standards) Contact: + / - 6KV Air: + / - 8KV - EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV D.C. Power Ports: + / - 4KV - EN61000-4-5 (Surge Standards) Signal Ports: + / - 2KV; Line-to-Earth D.C. Power Ports: + / - 2KV; Line-to-Earth - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM - EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz Mechanical Casing Aluminum case IP30 Dimensions 60mm (W) x 125mm (D) x 145mm (H) (2.36" (W) x 4.92" (D) x 5.7" (H)) Weight 1.1Kg (2.42lbs.) Installation DIN-Rail (Top hat type35mm), Rack Mount, Wall Mount Interface Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) Ethernet Port 10/100BASE-TX: 8, 6 or 4 port 100BASE-FX: 0 to 4 ports Gigabit: 0, 1 or 2 ports Console Port Port: One DB9 RS-232 port IEC60068-2-27 Ea (Shock) LED Indicators Per Unit: Power Status (Power 1, Power 2, Power 3) Per Port: 10/100TX, 100FX/ SFP: Link/Activity, Speed 10/100/1000TX, 1000SX/LX/ SFP: Link/Activity, Speed 25g @ 11ms (Half-Sine Shock Pulse; Operation) one relay output with current 1A @ 24VDC 1M (3.281ft.) Alarm Contact 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall) Order Information IES-1081 - 8 FE + 2 GE SFP Managed Switch -40 to 75C, DIN-rail Package Contents IES-1081 CD Manual / Utility Quick Installation Guide Optional Accessories SFP-4200 SFP-4210 SFP-4240 SFP-4270 SFP-4310 SFP-4320 - 1.25G MMF SFP Transceiver (550m, 850nm, -20 to 85C) 1.25G SMF SFP Transceiver (10km, 1310nm, -40 to 85C) 1.25G SMF SFP Transceiver (40km, 1310nm, -40 to 85C) 1.25G SMF SFP Transceiver (70km, 1550nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (10km, 1310nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (10km, 1550nm, -40 to 85C) SFP-4330 SFP-4340 SFP-4350 SFP-4360 SFP-4370 SFP-4380 - 1.25G BIDI SMF SFP Transceiver (20km, 1310nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (20km, 1550nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (40km, 1310nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (40km, 1550nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (60km, 1310nm, -40 to 85C) 1.25G BIDI SMF SFP Transceiver (60km, 1550nm, -40 to 85C) www.level1.com one world_one brand_one level_