Spec Sheet PrintPDF FBAR/SAW Devices (FBAR Duplexers) D6HP2G655BP11 Features Item Summary FBAR, Duplexer, 1.8x1.4x0.54mm Band 7 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 , 15000pcs Products characteristics table External Dimensions LTE Dimension L 1.8 ±0.10 mm Type FBAR Dimension W 1.4 ±0.10 mm Function Duplexer Dimension T Max 0.54 mm band Band 7 Insertion Loss (typ) 1.8/2.4 dB System (Tx-ANT/ANT-Rx) Isolation (typ) 56/56 dB Operating Temp. Range -30 to +85 ℃ RoHS2 Compliance (10 subst.) Yes REACH Compliance (168 subst.) Yes Soldering Reflow 2016.11.21 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Table 1-1. Specification (MHz) Min. Insertion loss 2500~2570 Max 1.8 2.4 2.1 3.1 2.1 3.5 1.0 2.3 1.0 2.7 - 1.6 2.2 - - 1.8 2.4 - - ANT Ripple VSWR 2500~2570 Tx Ant Input Power Absolute 2500~2570 2500~2570 Unit Typ. Tx to Final Electrical Specification Condition Item Apr. 15, 2016 - +29dBm,Ta=+50oC , 5kh,CW 2510~2570MHz dB (*1) dB 30 41 - dB 1565.42~1605.886 35 40 - dB 1605.886~1680 25 40 - dB 1805~1880 30 38 - dB 1900~1920 30 37 - dB 2010~2025 30 36 - dB 2110~2170 30 36 - dB 2400~2440 35 43 - dB 2440~2460 35 42 - dB 35 2460~2473 30 20 -20oC~+85oC -20oC~+85oC dBm 10~1565.42 attenuation Remarks -30oC~-20oC 39 - dB 15 -20oC~+35oC +35oC~+60oC +60oC~+85oC 2474~2500 1.0 1.8 - dB 2590~2620 1.5 7 - dB 2620~2690 45 51 - dB 5000~5140 35 48 - dB 5150~5850 35 43 - dB 7500~7710 30 37 - dB (*1) Specification of insertion loss excludes loss that comes from the test board. Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Table 1-2. ANT to Rx Specification (MHz) Min. 2620~2690 - 2620~2690 Unit Typ. Max 2.4 3.2 2.4 3.4 - 0.5 1.5 2620~2690 - 0.5 1.7 Phase balance 2620~2690 -15 -5/+2 +15 deg Amplitude balance 2620~2690 -1.5 -0.5/+0.2 +1.5 dB - 1.7 2.2 - - 1.6 2.3 - 1~2380 35 50 - dB 824~849 53 75 - dB 880~915 60 75 - dB 1710~1785 50 77 - dB 1850~1910 50 68 - dB 2380~2450 40 50 - dB 2450~2484 35 50 - dB 2500~2570 45 49 - dB 2570~2605 1.5 3 - dB 2775~8000 20 44 - dB 2500~2570 50 56 - dB 2500~2570 36 40 - dB 2620~2690 50 56 - dB 1574~1577 30 67 - dB 5000~5140 30 50 - dB 7500~7710 25 48 - dB Insertion loss Ripple VSWR ANT Rx Absolute attenuation Tx to Final Electrical Specification Condition Item Apr. 15, 2016 Isolation Rx 2620~2690 dB (*1) dB Remarks -20~+85℃ -20~+85℃ Differential Common mode Differential Tx port 50 Ω Single-ended Rx port 100//10nH Ω Balanced Ant port 50//2.8nH Ω Single-ended -30 to +85 oC Terminating Impedance Operating Temperature Maximum DC in all ports Device size (L typ. x W typ. x H max) - 1.8 x 1.4 x 0.54 (*1) Specification of insertion loss excludes loss that comes from the test board. 3 VDC mm Device only Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Apr. 15, 2016 Final Dimensions < Top View > < Side View > < Bottom View > Unit : mm Pin assignment Pin No. Pin name Description 1 Rx Receiver (balanced) 2 GND Ground 3 Tx Transmitter 4 GND Ground 5 GND Ground 6 ANT Antenna 7 GND Ground 8 Rx Receiver (balanced) Figure 1. Dimensions and Pin assignment Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Apr. 15, 2016 Final Evaluation Circuit Ant(50orm) L=2.8nH * 8 Rx(100ohm) 1 6 Tx(50ohm) 2,4 5,7 3 L=10nH * GND 1~8 : Pin No. *L:TAIYO YUDEN HKQ0603W series Recommended foot print pattern Figure 2. Recommended foot print pattern Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Tx to Ant Ant to Rx Figure 3-1. Electrical Characteristics These data exclude loss that comes from the test board. Apr. 15, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Tx to Ant, Ant to Rx Figure 3-2. Electrical Characteristics These data exclude loss that comes from the test board. Apr. 15, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Tx to Rx Isolation Tx to Rx Isolation(Common mode) Figure 3-3. Electrical Characteristics Apr. 15, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Tx Port Figure 3-4. Electrical Characteristics Apr. 15, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Rx Port Figure 3-5. Electrical Characteristics Apr. 15, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Ant Port Figure 3-6. Electrical Characteristics Apr. 15, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Ant to Rx (Amplitude balance) Ant to Rx (Phase balance) Figure 3-7. Electrical Characteristics Apr. 15, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Tx to Ant (Wide span) Ant to Rx (Wide span) Figure 3-8. Electrical Characteristics Apr. 15, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Tx to Rx (Wide span) Figure 3-9. Electrical Characteristics Apr. 15, 2016 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 7 Duplexer Date Part Number D6HP2G655BP11 Version 2.1bbB Apr. 15, 2016 Final Ordering Code Ordering Code Packing Reel size Status D6HP2G655BP11-Z Tape & Reel 3,000 pcs. MP D6HP2G655BP11-ZA Tape & Reel less than 3,000 pcs. MP D6HP2G655BP11-Y Tape & Reel 15,000 pcs. MP D6HP2G655BP11-YA Tape & Reel less than 15,000 pcs. MP D6HP2G655BP11-Q Bulk few pcs. MP *Minimum order quantity (MOQ) is assigned for each inquiry, Please contact to Sales Representatives.. *MP : Mass Production Notice All of the contents specified herein are subject to change without notice due to technical improvements, etc. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. This product is for general electronics equipment such as Audio-Visual equipment, household electronics, office supplies, information services and telecommunications; therefore, in case this product is used for any medical equipment, space equipment, nuclear equipment or disaster prevention equipment, please contact Taiyo Yuden in advance. In case this product is used for general electronics equipment or circuits which require high safety and high reliability, thoroughly evaluate on safety and add a protection circuit if necessary.