GBJ8D thru GBJ8M Glass Passivated Single Phase Bridge Rectifiers Reverse Voltage 200 to 1000V Forward Current 8.0 Amp Features y y y y y Circuit Glass passivated die construction Ideal for printed circuit boards Plastic material used carries UL flammability recognition 94V-0 High surge current capability High temperature soldering guaranteed: 265℃ /10 seconds, 0.375” (9.5mm) lead length, 5lbs. (2.3kg) tension Mechanical Data Case: Molded plastic case Terminals: Plated leads solderable per MIL-STD-750, Method 2026 + - Polarity: Marked on Body Mounting Position: Any Module Type TYPE VRRM VRSM GBJ8D GBJ8G GBJ8J GBJ8K GBJ8M 200V 400V 600V 800V 1000V 300V 500V 700V 900V 1100V Maximum Ratings and Thermal Characteristics (TA = 25℃ unless otherwise noted) Symbol Conditions Values 8.0 Maximum average forward output rectified current Tc =100℃ IF(AV) Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) IFSM i2t Rating for fusing (t<8.3ms) a.c.50HZ;r.m.s.;1min Visol Maximum thermal resistance per leg Tj, TSTG Weight Operating Junction and storage temperature range Approximate Weight Electrical Characteristics (TA = 25℃ unless otherwise noted) Symbol Conditions IR Notes: A 180 A 134 A2s 2500 V (1) RθJA RθJC VF Units Maximum Instantaneous Forward Voltage per leg Maximum DC reverse current at rated DC blocking voltage per leg IFM =4.0A TA = 25℃ TA = 125℃ 26 3.4 (2) ℃/W -55 to +150 7.0 ℃ g Values Units 1.0 V 5.0 500 µA (1) Junction to ambient without heatsink (2) Junction to case with heatsink (3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with M3 screw Document Number: GBJ8D thru GBJ8M Jan.12, 2011 www.smsemi.com 1 GBJ8D thru GBJ8M Performance Curves 100 IF, INSTANTANEOUS FWD CURRENT (A) I (AV), AVERAGE OUTPUT CURRENT (A) 10 8 6 4 2 Single Phase Half Wave 60Hz Resistive or Inductive Load 0 0 50 100 TA, AMBIENT TEMPERATURE (ºC) Fig.1 Forward Current Derating Curve 1.0 Tj=25ºC Pulse Width=300ms 0.1 150 250 0.5 0.7 0.9 1.1 1.3 1.5 VF, INSTANTANEOUS FWD VOLTAGE (V) Fig.2 Typical Forward Characteristics, per element 400 200 Cj, CAPACITANCE (pF) IFSM, PEAK FWD SURGE CURRENT (A) 10 150 100 100 50 10 1 10 100 NUMBER OF CYCLES AT 60Hz Fig.3 Max Non-Repetitive Peak Fwd Surge Current IR, INSTANTANEOUS REVERSE CURRENT (mA) 0 Tj=25ºC f =1MHZ 8.3ms Single Half Sine-Wave JEDEC Method 1 10 100 VR, REVERSE VOLTAGE (V) Fig.4 Typical Junction Capacitance Per Element 10 Tj=100ºC 1.0 0.1 Tj=25ºC 0.01 0 20 40 60 80 100 120 140 RATED PERCENT OF PEAK REVERSE VOLTAGE (%) Fig.5 Typical Reverse Characteristics Document Number: GBJ8D thru GBJ8M Jan.12, 2011 www.smsemi.com 2 GBJ8D thru GBJ8M Package Outline Information CASE: GBJ 1.193(30.3) 1.170(29.7) 0.150(3.8) 0.134(3.4) 0.134(3.4) 0.118(3.0) 0.799(20.3) 0.775(19.7) 0.165(4.2) 0.150(3.8) + ~ ~ 0.197 (5.0) - 0.106(2.7) 0.091(2.3) 0.094(2.4) 0.079(2.0) 0.043(1.1) 0.035(0.9) 0.697(17.7) 0.677(17.2) 0.441(11.2) 0.425(10.8) 0.189(4.8) 0.173(4.4) 0.114(2.9) 0.098(2.5) 0.031(0.8) 0.024(0.6) 0.409(10.4) 0.303(7.7) (2×) 0.394(10.0) 0.287(7.3) Dimensions in inches (mm) Document Number: GBJ8D thru GBJ8M Jan.12, 2011 www.smsemi.com 3