BAT42W, BAT43W www.vishay.com Vishay Semiconductors Small Signal Schottky Diode FEATURES • These diodes feature very low turn-on voltage and fast switching. These devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges • For general purpose applications • AEC-Q101 qualified MECHANICAL DATA • Base P/N-E3 - RoHS-compliant, commercial grade Case: SOD-123 • Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified Weight: approx. 10.3 mg • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box PARTS TABLE PART BAT42W BAT43W ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING Single diode L2 Single diode L3 BAT42W-E3-08 or BAT42W-E3-18 BAT42W-HE3-08 or BAT42W-HE3-18 BAT43W-E3-08 or BAT43W-E3-18 BAT43W-HE3-08 or BAT43W-HE3-18 REMARKS Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE Repetitive peak reverse voltage VRRM 30 V Forward continuous current (1) IF 200 mA tp < 1 s, < 0.5 IFRM 500 mA tp < 10 ms IFSM 4 A Tamb = 65 °C Ptot 200 mW SYMBOL VALUE UNIT RthJA 300 K/W Tj 125 °C Operating temperature range Top - 55 to + 125 °C Storage temperature range Tstg - 55 to + 150 °C Repetitive peak forward current (1) Surge forward current (1) Power dissipation (1) TEST CONDITION UNIT Note (1) Valid provided that electrodes are kept at ambient temperature THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Thermal resistance junction to ambient air (1) Junction temperature Note (1) Valid provided that electrodes are kept at ambient temperature Rev. 1.8, 25-Feb-13 Document Number: 85661 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAT42W, BAT43W www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. Reverse breakdown voltage IR = 100 μA (pulsed) V(BR) 30 VR = 25 V IR Leakage current (1) Reverse recovery time MAX. UNIT 0.5 μA V IR 100 μA IF = 200 mA VF 1000 mV VF 400 mV voltage (1) Diode capacitance TYP. VR = 25 V, Tj = 100 °C IF = 10 mA Forward PART BAT42W IF = 50 mA BAT42W VF IF = 2 mA BAT43W VF IF = 15 mA BAT43W 260 VF VR = 1 V, f = 1 MHz CD IF = 10 mA, IR = 10 mA, iR = 1 mA, RL = 100 trr 650 mV 330 mV 450 mV 7 pF 5 ns Note (1) Pulse test; t 300 μs, t /T < 0.02 p p TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1000 IR - Reverse Leackage Current (µA) Ptot - Power Dissipation (mW) 250 200 150 100 50 0 0 50 100 150 100 75 °C 50 °C 1 25 °C 0.1 0.01 0 10 20 30 40 VR - Reverse Voltage (V) 18444 Fig. 1 - Admissible Power Dissipation vs. Ambient Temperature 50 Fig. 3 - Typical Reverse Characteristics 1000 14 100 125 °C - 40 °C 10 25 °C 1 0.1 CD - Diode Capacitance (pF) I F - Forward Current (mA) 100 °C 10 200 Tamb - Ambient Temperature (°C) 18442 125 °C 12 10 8 6 4 2 0 0.01 0 18443 200 400 600 800 1000 1200 VF - Instantaneous Forward Voltage (mV) Fig. 2 - Typical Forward Characteristics Rev. 1.8, 25-Feb-13 0 18445 5 10 15 20 25 30 VR - Reverse Voltage (V) Fig. 4 - Typical Capacitance vs. Reverse Voltage Document Number: 85661 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAT42W, BAT43W www.vishay.com Vishay Semiconductors 0.10 (0.004) 0.15 (0.006) 8° 0.45 (0.018) 0.25 (0.010) 0° to 0.2 (0.008) 1 (0.039) 1.35 (0.053) 0.1 (0.004) max. PACKAGE DIMENSIONS in millimeters (inches): SOD-123 0.5 (0.020) ref. Cathode bar Mounting Pad Layout 2.85 (0.112) 2.55 (0.100) 0.85 (0.033) 2.5 (0.098) 0.85 (0.033) 3.55 (0.140) 1.40 (0.055) 3.85 (0.152) 1.7 (0.067) 0.45 (0.018) 0.65 (0.026) 0.85 (0.033) Rev. 4 - Date: 24. Sep. 2009 Document no.: S8-V-3910.01-001 (4) 17432 Rev. 1.8, 25-Feb-13 Document Number: 85661 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BAT42W-V-GS08 BAT43W-V-GS08 BAT42W-V-GS18 BAT43W-V-GS18 BAT43W-G3-18 BAT43W-E3-08 BAT42W-E3-18 BAT43W-G3-08 BAT42W-E3-08 BAT42W-G3-18 BAT42W-G3-08 BAT42W-HE3-18 BAT43W-E318 BAT42W-HE3-08 BAT43W-HE3-08 BAT43W-HE3-18