Z-Power LED X10490 Technical Data Sheet Specification LM560A SSC Drawn Approval CUSTOMER Approval Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Contents 1. Features 2. Absolute Maximum Ratings 3. Electric-Optical Characteristics 4. Reliability Tests 5. Characteristic Diagrams 6. Color & Binning 7. Outline Dimensions 8. Packing 9. Soldering 10. Precaution for use Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet LM560A LM560A Description Features 사진 Lamp LEDs are effective in hot thermal and humid condition. This high brightness and weather-resistant packaging design makes these Lamp LEDs ideal for Outdoor applications such as traffic • High luminous Warm emission • Non-standoff leads • 5mm package • Viewing angle : 60 º • Color Coordinates : x=0.45 y=0.41 signals, variable message signs and backlighting for transparent sign panels. Applications • Electronic signs and signals • Specialty lighting • Small area illumination • Torches and head lamps • Backlighting • Outdoor displays Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 2. Absolute Maximum Ratings ( Ta = 25ºC ) Item Symbol Value Unit DC Forward Current IF 30 mA Forward Peak Pulse Current IFP [1] 100 mA Reverse Voltage VR 5 V Power Dissipation PD 114 mW Operating Temperature Topr -40 ~ 100 ºC Storage Temperature Tstg -40 ~ 100 ºC Solder Temperature Ts 260ºC for 10seconds [2] ºC Notes : [1] t ≤ 0.1ms, D = 1/10 [2] No lower than 3mm from the base of the epoxy bulb. 3. Electro-Optical Characteristics ( Ta = 25ºC, IF=20mA ) Item Symbol Luminous Intensity [3] Value Unit Min. Typ. Max. IV [4] 1250 2500 - mcd Luminous Flux ФV - 2.7 - lm Chromaticity Coordinate [5] x, y Forward Voltage [6] VF View Angle 2θ ½ 60 deg. Thermal Resistance RθJ-A 285 ºC /W Optical Efficiency Ŋelc - 42 - lm/W Reverse Current (at VR = 5V) IR - - 5 µA x=0.45, y=0.41 - 3.2 3.8 V Notes : [3] SSC maintains a tolerance of ±10% on intensity and power measurements. [4] IV is the luminous intensity output as measured with a cylinder. [5] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. Color Coordinates Measurement allowance is ± 0.01 [6] A tolerance of ±0.05V on forward voltage measurements Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 4. Reliability Tests Item Condition Note Failures Life Test Ta = RT, IF = 30mA 1000hrs 0/22 High Temperature Operating Ta = 85ºC, IF = 8mA 1000hrs 0/22 Low Temperature Operating Ta = -30ºC, IF = 20mA 1000hrs 0/22 Thermal Shock Ta = -40ºC (30min) ~ 100º (30min) (Transfer time : 10sec, 1Cycle = 1hr) 100 cycles 0/40 Resistance to soldering Heat Ts = 255 ± 5ºC, t = 10sec 1 time 0/22 ESD (Human Body Model) 1kV, 1.5kΩ ; 100pF 1 time 0/22 High Temperature Storage Ta = 100ºC 1000hrs 0/22 Low Temperature Storage Ta = -40ºC 1000hrs 0/22 Temperature Humidity Storage Ta = 85ºC, RH = 85% 1000hrs 0/22 Temperature Humidity Operating Ta = 85ºC, RH = 85%, IF = 8mA 100hrs 0/22 < Judging Criteria For Reliability Tests > VF USL[1] X 1.2 IR USL X 2.0 ФV LSL [2] X 0.7 Notes : [1] USL : Upper Standard Level [2] LSL : Lower Standard Level. Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 5. Characteristic Diagrams Ta= 25ºC Relative Luminous Intensity Forward Current(mA) 100 10 Ta= 25ºC 4 3 2 1 1 0 2.4 2.8 3.2 3.6 4.0 4.4 0 Forward Voltage [V] 40 60 80 100 Forward Current [mA] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity 40 0.43 30 0.42 Ta= 25ºC 100mA 50mA y Forward Current IF [mA] 20 20 30mA 20mA 0.41 10mA 5mA 0.40 10 1mA 0 -40 -20 0 20 40 60 80 100 o Ambient Temperature Ta[ C] Ambient Temperature vs. Maximum Forward Current 0.39 0.43 0.44 0.45 0.46 0.47 x Forward Current vs. Chromaticity Coordinate Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet IF= 20mA 1.2 3.2 Forward Voltage [V] Relative Luminous Intensity 1.0 0.8 0.6 0.4 0.2 0.0 IF= 20mA 3.4 0 20 40 60 80 3.0 2.8 2.6 2.4 100 0 20 o Ta= 25ºC, IF= 20mA Relative Luminous Intensity 1.0 0.5 500 600 Wavelength [nm] Spectrum 100 Ambient Temperature vs. Forward Voltage Ta= 25ºC, IF= 20mA 1.0 80 Ambient Temperature Ta[ C] Ambient Temperature vs. Relative Intensity Relative Emission Intensity 60 o Ambient Temperature Ta[ C] 0.0 400 40 700 0.8 0.6 0.4 0.2 0.0 -90 -60 -30 0 30 60 90 Off Axis Angle [deg.] Directivity Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 6. Color & Binning 0.46 2500K 0.44 3175K e CIE(y) 0.42 f Plankian line g 0.40 h 0.38 0.36 0.40 0.42 0.44 0.46 0.48 0.50 0.52 CIE(x) Rank e Rank f x 0.4390 0.4323 0.4864 0.4970 x 0.4323 0.4248 0.4769 0.4864 y 0.4310 0.4160 0.4294 0.4466 y 0.4160 0.3993 0.4137 0.4294 Rank g Rank h x 0.4248 0.4196 0.4689 0.4769 x 0.4196 0.4129 0.4588 0.4689 y 0.3993 0.3877 0.4004 0.4137 y 0.3877 0.3725 0.3838 0.4004 Note : Color Coordinates Measurement allowance is ± 0.01 Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Bin Code Description Bin Code Luminous Intensity CIE Forward Voltage N f 4 Luminous Intensity (mcd) @ IF = 20mA Bin Code Min. Max. M 1250 1650 N 1650 2500 O 2500 3500 Color Rank @ IF = 20mA e f Available ranks g h Forward Voltage (V) @ IF = 20mA Bin Code Min. Max. 2 2.6 2.8 3 2.8 3.0 4 3.0 3.2 5 3.2 3.4 6 3.4 3.6 7 3.6 3.8 Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 7. Outline Dimensions Unit : mm -0.1 0.5 +0.2 1.0 DETAIL 0.5 ± 0.05 2.5 ± 0.05 ANODE 1.0 MIN 3.2 ± 0.2 1.0 MAX 1.0 28.0 MIN 8.7 ± 0.2 5.0 ± 0.2 5.9 ± 0.2 Notes : Protruded epoxy is 1.0mm maximum. Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 8. Packing Unit : mm * Antistatic poly bag 50 (500pcs max/bag) 95 325 170 * Inner box (1bag max/box) 27 0 * Cardboard box (35000pcs max/box) (70boxes max/box) 480 Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Unit : mm 12.0 ± 0.5 12.7 ± 0.2 0 ± 1.3 0 ± 2.0 0.5 ± 0.1 2.5 ± 0.5 12.7 ± 0.2 18 ± 0.5 13 ± 0.5 9.0 ± 0.5 Max 1.0 1.5 Max 4.0 ± 0.2 LXXXX RANK : XXXX QTY : 2000pcs LOT : 20XX.XX.XX SEOUL SEMICONDUCTOR CO., LTD 1 Box contain quantity. * 3φ Series : 3000pcs/box * 5φ Series : 2000pcs/box Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 9. Soldering Profile 1) Wave Soldering Conditions / Profile • Preliminary heating to be at 85ºC(120 ºC max) for 20 seconds(60 seconds max). • Soldering heat to be at 255 ºC (260ºC max) for 10 seconds • Soak time above 200 ºC is 5 seconds 300 PEAK 250 200 255 ºC (260 ºC max) O Temperature [ C] 10s 150 PREHEAT 20s (60s Max) 100 85 ºC(120 ºC max) 50 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 T im e [s ] 2) Hand Soldering conditions • Not more than 3 seconds at max. 350ºC, under Soldering iron. 3) Caution • The LEDs must not be repositioned after soldering. • Do not apply any stress to the lead particularly when heat. Note : In case the soldered products are reused in soldering process, we don’t guarantee the products. Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 10. Precaution for Use 1) Storage • Before opening the package a. Avoid the absorption of moisture, we recommended to store the LEDs in a dry box(or desiccator) with a desiccant . Otherwise, store them in the following environment: Temperature : 5℃~30℃ Humidity : 50% max. b. The products should be used in 3 months. It is recommended that the LEDs be used as soon as possible. • After opening the package a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40℃, Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, Components should be dried for 10-12hr at 60±5℃ • Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. • Avoid quick cooling • Leadframes are silver plated SPCC. The silver plate surface may be affected by environments which contains corrosive substances. Please avoid conditions which may cause the LEDs to corrode, tarnish or discolor. 2) Lead Forming • When the lead forming is required before soldering , care must be taken to avoid any bending and mechanical stress. The stress to the base may damage the LEDs. • When mounting the LEDs onto a PCB, the holes on the circuit board should be exactly aligned with the leads of the LEDs. • It is recommended that tooling made to precisely form and cut the leads to length rather than rely on hand operating. Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 3) Static Electricity • Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. • All devices, equipment and machinery must be grounded properly. It is recommended that precautions should be taken against surge voltage to the equipment that mounts the LEDs. 4) Heat Generation • Thermal is one of the important parameters to design the end product. Please consider the heat generation of the LEDs. • The operating current should be decided after considering the ambient maximum temperature of LEDs. 5) Others • The color of the LEDs is changed slightly an operating current and thermal. • Anti radioactive ray design is not considered for the products listed here. • Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. • This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used. • When the LEDs are illuminating, operating current should be decided after considering the junction temperature. Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5 • The appearance and specifications of the product may be modified for improvement without notice. SEOUL SEMICONDUCTOR CO., LTD. 148-29, Rev. 00 December 2007 www.ZLED.com <080924> Rev. 0.1 Document No. : SSC-QP-7-07-24 (Rev.00)