HM67 Electrical / Environmental • • • • Operating Temperature Range Ambient Temperature, Maximum Temperature Rise, Maximum Dielectric Withstanding Voltage Surface Mount Common Mode Chokes -40°C to +125°C 85°C 40°C 300Vdc S RomHpliant Co Schematic Specifications Common Mode Inductance Inductance Leakage @100 kHz - 0.1 V @100 kHz - 0.1 Vrms Rated Part (1-4 or 2-3) (1-4)(1) Typ. Current Number Terminals µH µH mA HM67-B5R0LF 1-4, 2-3 5.0 ± 30% 0.08 1000 HM67-B110LF 1-4, 2-3 11.0 ± 30% 0.10 500 HM67-S250LF 1-4, 2-3 25.0 ± 30% 1.60 500 HM67-B510LF 1-4, 2-3 51.0 ± 30% 1.90 500 HM67-S510LF 1-4, 2-3 51.0 ± 30% 2.80 500 HM67-B471LF 1-4, 2-3 470.0 ± 30% 0.80 500 HM67-B102(3)LF 1-4, 2-3 1000.0 +50%, -30% 0.16 500 HM67-B222(3)LF 1-4, 2-3 2200.0 +50%, -30% 0.16 400 HM67-B472(3)LF 1-4, 2-3 4700.0 +50%, -30% 0.24 200 HM67-10510LF 1-4, 2-3 51.0 ± 30%(4) 2.40(4) 200 Notes: DCR (2) Max. W 0.12 0.15 0.18 0.10 0.25 0.28 0.30 0.42 0.67 0.403 Marking Code A B C D E F G H I 0510 Figure (1) Leakage inductance is measured with pin 2 & 3 shorted. (2) DC resistance is measured at 25°C. (3) Maximum operating temperature is +85°C. (4) Common mode inductance & leakage inductance of HM67-10510LF are measured at 100 kHz, 0.05V Packaging Standard: Embossed Tape & Reel Reel: Diameter: Capacity: Figure 1 & 2 Figure 1 Figure 2 = = = 13” (330.2mm) 400 Units 2000 Units Ordering Information Model Series HM67 - B Winding Type: B = Bifilar S /10= Sector 110 LF TR13 TR - Tape & Reel Packing 13 - 13” reel Lead-Free Inductance Code: First 2 digits are significant. Last digit denotes the number of trailing zeros. For values below 10µH, “R” denotes the decimal point. 70 MAGNETIC COMPONENTS SELECTOR GUIDE 2009/10 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com 1 1 1 1 1 1 1 1 1 2 Outline Dimensions (Inch/mm) Figure 1 Figure 2 Bottom View Side View .024 0.60 Typ. .138 3.50 Max. .155 3.9 Max. .197 5.00 Max. Seating Plane .004/0.10 Max. Side View Top View Top View .37 Max. 9.4 Marking Location .10 ± .004 2.5 ± 0.1 1 4 2 3 .140 Max. 3.55 .236 Max. 6.0 .138 3.5 Max. Marking (Refer to Specifications Table) Recommended Solder Pad Layout Recommended Solder Pad Layout .090 .098 2.3 2.5 .047 1.2 .067 1.7 .177 4.5 .40 10.2 www.bitechnologies.com .087 2.2 .232 5.9 2009/10 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE We reserve the right to change specifications without prior notice. 71 Electrical Characteristics @ 25°C (A) Attenuation vs. Frequency Graphs HM67-B5R0LF HM67-S250LF HM67-B110LF HM67-B510LF HM67-B110 72 MAGNETIC COMPONENTS SELECTOR GUIDE 2009/10 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com Electrical Characteristics @ 25°C (Cont’d) HM67-S510LF HM67-B102LF HM67-B471LF HM67-B222LF HM67-B222 HM67-B472LF www.bitechnologies.com 2009/10 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE We reserve the right to change specifications without prior notice. 73 Electrical Characteristics @ 25°C (Cont’d) (B) Insertion Loss vs. Frequency Graph HM67-10510LF Common Mode Insertion Loss (dB) Common Mode Differential Mode Differential Mode Frequency (MHz) (C) Current Derating Curve I o/p / I Rated HM67-10510LF Ambient Temperature (0C) 74 MAGNETIC COMPONENTS SELECTOR GUIDE 2009/10 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com