HPR1XXWC Series 0.75 Watt Single Output DC/DC Converter FEATURES The HPR1XXWC Series uses advanced circuit design and packaging technology to deliver superior reliability and performance. A 170kHz push-pull oscillator is used in the input stage. Beat-frequency oscillation problems are reduced when using the HPR1XXWC Series with high frequency isolation amplifiers. Low Cost Multiple Package Styles Internal Input and Output Reduced parts count and high efficiency add to the reliability of the HPR1XXWC Series. The high efficiency of the HPR1XXWC Series means less internal power dissipation, as low as 190mW. Filtering Non-Conductive Case With reduced heat dissipation the HPR1XXWC Series can operate at higher temperatures with no degradation. In addition, the high efficiency of the HPR1XXWC Series means the series is able to offer greater than 10 W/inch3 of output power density. Operation down to no load will not impact the reliability of the series, although a >1mA minimum load is needed to realize published specifications. High Output Power Density: 10 Watts/Inch3 Extended Temperature Range: -25°C to +85°C Efficiency to 79% The HPR1XXWC Series provides the user a low cost converter without sacrificing reliability. The use of surface mounted devices and advanced manufacturing technologies make it possible to offer premium performance and low cost. RoHS Compliant All specifications are typical at TA = +25°C nominal input voltage unless otherwise specified. PRODUCT SELECTION CHART MODEL HPR100WC HPR101WC HPR102WC HPR103WC HPR104WC HPR105WC HPR106WC HPR107WC HPR108WC HPR109WC HPR110WC HPR111WC HPR112WC HPR113WC HPR114WC HPR115WC HPR116WC HPR117WC HPR118WC HPR119WC HPR120WC HPR121WC HPR122WC HPR123WC NOMINAL INPUT VOLTAGE (VDC) RATED OUTPUT VOLTAGE (VDC) RATED OUTPUT CURRENT (mA) INPUT CURRENT NO LOAD (mA) 5 5 5 5 5 5 12 12 12 12 12 12 15 15 15 15 15 15 24 24 24 24 24 24 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 20 20 20 20 20 20 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 RATED LOAD (mA) REFLECTED RIPPLE CURRENT (mAp-p) EFFICIENCY (%) 216 212 212 218 212 200 90 81 81 88 81 81 72 72 72 72 63 63 48 48 45 45 45 45 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 15 15 15 15 15 15 69 70 71 68 68 75 69 77 77 71 74 77 69 69 69 69 76 79 65 65 76 69 67 69 Note: Other input to output voltages may be available. Please contact Murata Power Solutions. For full details go to www.murata-ps.com/rohs www.murata-ps.com Technical enquiries email: [email protected], tel: +1 508 339 3000 TDC_HPR1xxWC.B01 Page 1 of 4 HPR1XXWC Series 0.75 Watt Single Output DC/DC Converter SPECIFICATIONS, ALL MODELS Specifications are at TA = +25°C nominal input voltage unless otherwise specified. PARAMETER CONDITIONS MIN TYP MAX UNITS GENERAL OUTPUT INPUT Voltage Range 4.5 5 5.5 VDC 10.8 12 13.2 VDC 13.5 15 16.5 VDC 21.6 24 26.4 VDC Voltage Rise Time See Typical Performance Curves & Application Notes: “Capacitive Loading Effects on Start-Up of DC/DC Converters” OUTPUT Rated Power 750 mW Voltage Setpoint Accuracy Rated Load, Nominal VIN ±5 % Ripple & Noise BW = DC to 10MHz 150 200 mVp-p BW =10Hz to 2MHz 30 40 mVrms Voltage (Over Input Voltage Range) 1mA to Rated Current, VOUT = 5V 4.75 7 VDC 1mA to Rated Current, VOUT = 12V 11.40 15 VDC 1mA to Rated Current, VOUT = 15V 14.25 18 VDC Temperature Coefficent .01 .05 %/ °C REGULATION Load Regulation (All other modes) Rated Load to 1mA Load 3 % GENERAL ISOLATION Rated Voltage 750 VDC Test Voltage 60 Hz, 10 Seconds 750 Vrms Resistance 10 GΩ Capacitance 25 100 pF Leakage Current VISO= 240VAC, 60Hz 2 8.5 μArms Switching Frequency 170 kHz Frequency Change Over Line and Load 24 % Package Weight 3 g MTTF per MIL-HDBK-217, Rev. F* Circuit Stress Method Ground Benign TA = +25°C 7.9 MHr Fixed Ground TA = +35°C 1.9 MHr Naval Sheltered TA = +35°C 1.2 MHr Airborne Uninhabited Fighter TA = +35°C 300 kHr Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-20 2 TEMPERATURE Specification -25 +25 +85 °C Operation -40 +100 °C Storage -40 +110 °C SOLDERING INFORMATION The surface mount versions of the HPR1XXWC series are designed for SMT reflow soldering. During this standard process devices should be heated at a rate not to exceed 3 degrees C per second. The peak reflow temperature is 260 degrees C. The device should not be exposed to the peak temperature ±10 degrees C for more than 12 seconds. The cool down rate for this device should not exceed 3 degrees C per second. www.murata-ps.com Technical enquiries email: [email protected], tel: +1 508 339 3000 TDC_HPR1xxWC.B01 Page 2 of 4 HPR1XXWC Series 0.75 Watt Single Output DC/DC Converter TYPICAL PERFORMANCE CURVES Specifications are at TA = +25°C nominal input voltage and nominal load. VOUT VS LOAD (5Vout Models) VOUT VS LOAD (±5Vout Models) 5.7 5.4 5.5 5.2 VOUT VS LOAD (12Vout Models) 12.5 5.3 12.3 Vout Vout Vout 12.4 5.0 12.2 12.1 5.1 4.8 4.9 4.6 12.0 0 80 40 120 160 11.9 0 20 Output Current (mA) 40 60 0 80 VOUT VS LOAD (±12Vout Models) 80 VOUT VS LOAD (±15Vout Models) 16.0 15.7 12.4 15.5 12.3 15.5 Vout Vout Vout 60 16.5 15.9 12.5 40 Output Current each load (mA) VOUT VS LOAD (15Vout Models) 12.6 15.0 12.2 15.3 14.5 12.1 15.1 14.0 12.0 14.9 0 10 20 30 13.5 0 40 20 40 60 80 Output Current each load (mA) Output Current each load (mA) EFFICIENCY VS LOAD OSCILLATION FREQUENCY VS TEMPERATURE 90 0.2 0 0.4 0.6 0.8 1.0 Output Power each load (Watts) 220 Frequency (KHz) 75 Efficiency (%) 20 Output Current each load (mA) 60 45 30 15 0 20 0 180 160 140 60 40 200 80 -30 100 0 % of Rated Load (%) 30 60 90 Temperature (°C) SAFE OPERATING AREA LOAD CAPACITANCE vs INPUT RISE TIME (5 Vout models) 600 50 Total Load Capacitance (uF) Total Load Capacitance (uF) 500 400 300 SAFE OPERATING AREA 200 40 30 SAFE OPERATING AREA 20 10 100 0 0 0 5 10 15 20 25 30 35 Rise Time of Input Voltage (mS) 40 45 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) LOAD CAPACITANCE vs INPUT RISE TIME (12 Vout models) NOTES: 1.) When operated within the SAFE OPERATING AREA as defined by the above curves, the output voltage of HPR1XXC devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steady-state value. 2.) For dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. 80 70 60 50 SAFE OPERATING AREA 40 0 50 90 Total Load Capacitance (uF) LOAD CAPACITANCE vs INPUT RISE TIME (15 Vout models) 60 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) www.murata-ps.com Technical enquiries email: [email protected], tel: +1 508 339 3000 TDC_HPR1xxWC.B01 Page 3 of 4 HPR1XXWC Series 0.75 Watt Single Output DC/DC Converter MECHANICAL PACKAGE/PINOUT “W” SMD PACKAGE 0.785±0.010" (19.94±0.25) 11 10 9 8 14 13 0.695±0.015" (17.65±0.38) 0.525±0.010" (13.34±0.25) TOP VIEW 1 2 3 4 5 6 7 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) SIDE VIEW 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) BOTTOM VIEW 0.014±0.002" (0.36±0.05) .015±.010" (.38±.26) PIN CONNECTIONS PIN# 1 2 3 4 5 6 SINGLES +VIN -VIN NC NC -VOUT NC DUALS PIN# +VIN -VIN NC NC -VOUT Common 7 8 9 10 11 13 14 SINGLES DUALS +VOUT NC NC NC NC NC NC +VOUT NC NC NC NC NC NC NOTES: NC = Do Not Connect. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) MATERIAL: Lead material is phosphor bronze; lead finish is 100-300 microinches of matte tin over a nickel barrier layer of 5-40 microinches. ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS HPR 1XX W Internal Power Dissipation ........................................ 450mW Short Circuit Duration ................................................ Momentary C Device Family HPR Indicates DC/DC Converter Model Number Selected from Table of Electrical Characteristics Package Option W = SMD Package RoHS Compliant Version USA: Mansfield (MA), Tel: (508) 339-3000, email: [email protected] Canada: Toronto, Tel: (866) 740-1232, email: [email protected] Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 UK: Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected] France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected] Germany: München, Tel: +49 (0)89-544334-0, email: [email protected] www.murata-ps.com email: [email protected] ISO 9001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. Japan: Tokyo, Tel: 3-3779-1031, email: [email protected] Osaka, Tel: 6-6354-2025, email: [email protected] Website: www.murata-ps.jp China: Shanghai, Tel: +86 215 027 3678, email: [email protected] Guangzhou, Tel: +86 208 221 8066, email: [email protected] 05/09/08 www.murata-ps.com Technical enquiries email: [email protected], tel: +1 508 339 3000 TDC_HPR1xxWC.B01 Page 4 of 4