UNISONIC TECHNOLOGIES CO., LTD MBR30200C Preliminary DIODE 30A, 200V SCHOTTKY BARRIER RECTIFIER 1 DESCRIPTION TO-220 The UTC MBR30200C is a 30A schottky barrier rectifier, it uses UTC’s advanced technology to provide the customers with high surge capability, high efficiency, high current capability, low power loss and low forward voltage drop, etc. The UTC MBR30200C is suitable for free wheeling and polarity protection, etc. 1 TO-220F1 FEATURES * Low reverse current * High current capability * Low power loss * High efficiency * For use in low voltage, high frequency inverters SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR30200CL-TA3-T MBR30200CG-TA3-T MBR30200CL-TF1-T MBR30200CG-TF1-T Note: Pin Assignment: A: Anode K: Cathode MBR30200CL-TA3-T Package TO-220 TO-220F1 Pin Assignment 1 2 3 A K A A K A Packing Tube Tube (1)Packing Type (1) T: Tube (2)Package Type (2) TA3: TO-220, TF1: TO-220F1 (3)Green Package (3) L: Lead Free, G: Halogen Free and Lead Free MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R202-011.c MBR30200C Preliminary DIODE ABSOLUTE MAXIMUM RATINGS PARAMETER Working Peak Reverse Voltage Repetitive Peak Reverse Voltage Maximum RMS Reverse Voltage DC Blocking Voltage Average Rectified Output Current Per Device SYMBOL VRWM VRRM VR(RMS) VR RATINGS 200 200 140 200 15 30 UNIT V V V V A A RATINGS 62.5 1.8 3.3 UN IT °C/W °C/W °C/W Per Leg IO Total Non-Repetitive Peak Forward Surge Current IFSM 180 A 8.3ms Single Half-Sine-Wave Operating Junction Temperature (Note 1) TJ -65~+150 °C Storage Temperature (Note 1) TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS PARAMETER Junction to Ambient Junction to Case SYMBOL θJA TO-220 TO-220F1 θJC ELECTRICAL CHARACTERISTICS (Note 2) (TA=25°C, unless otherwise noted.) PARAMETER Reverse Breakdown Voltage SYMBOL V(BR)R TEST CONDITIONS MIN TYP MAX UNIT IR=0.50mA 200 V IF=15A, TC=25°C 0.90 V Instantaneous Forward Voltage VF 0.80 V IF=15A, TC=125°C VR=200V, TJ=25°C 50 μA Instantaneous Reverse Current IR VR=200V, TJ=125°C 10 mA Notes: 1. The heat generated must be less than the thermal conductivity from Junction to Ambient: PD/TJ<1/θJA. 2. Pulse Test: Pulse Width=300μs, Duty Cycle≤2.0%. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R202-011.c MBR30200C Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-011.c