Oiltight Switches & Pilot Devices ø22mm - TW Series Accessories Switches & Pilot Lights TW Series Accessories Appearance Description/Usage Part Number Lamp Removal Tool Rubber tool used to install or remove LED’s and incandescent lamps Contact Block Remover Used to remove contact blocks, transformers, lenses, and adaptors. Can also be used to determine panel thickness adjustment. TW-KC1 Nut Locking Wrench Used in OR-14 locking wrench to tighten locking nuts inside square bezel TW-KQ2 Metal Bezel Chrome plated bezels tighten onto operator (replacement for damaged bezels) Standard octagonal units (chrome-pl.) AW-R8 Full shroud octagonal units (chrome-pl.) AW-RF8 Full shroud mushroom head units Ø 40mm AW-G4 Round flush units (black plastic) AW-RP1B Round extended units (black plastic) AW-FP1B AW-Q1B Square units with full shroud (black plastic) AW-QF1B Waterproof lens cover for square pilot lights APW00LN Waterproof lens cover for square illuminated buttons Boot/Cover Used to cover and protect pushbuttons APW00L Clear boot for round flush units OC-31 Clear boot for round extended units OC-32 *In place of asterisk, specify Rubber Boot color: B (black), G (green), R (red), Y (yellow) - (nitril rubber) OCW-11* Ring to prevent operator base from rotating in the mounting hole. Used when nameplate is not used OGL-31 Mounting Hole Plug Black rubber plug fills unused mounting holes in panel. OB-31 Metallic Mounting Hole Plug For plugging unused mounting holes in the panel. Tighten the attached locking ring to a torque of 12 kfg-cm maximum Degree of protection: IP66 Replacement Keys Pair of keys (#0) Timers Anti-Rotation Ring Terminal Blocks LW9Z-BM TW-SK Replacement Black Sleeve for Keyswitch AKW2B-B Used on flush buttons to prevent inadvertent actuation USA: 800-262-IDEC Canada: 888-317-IDEC Circuit Breakers Metal Button Guard Relays & Sockets Square units (black plastic) Display Lights Plastic Bezel Black plastic bezels for square buttons (replacement for damaged bezels) OR-55 OLW-C 593