Juxing DHE0.3B Surface mount ultra fast rectifier Datasheet

DHE0.3A~DHE0.3M
Surface Mount Ultra Fast Rectifiers
Features
●
Low profile space
●
Ideal for automated placement
●
Glass passivated chip junctions
●
Low forward voltage drop
●
Low leakage current
●
High forward surge capability
●
High temperature soldering:
260℃/10 seconds at terminals
●
Component in accordance to
RoHS 2002/95/1 and WEEE 2002/96/EC
Major Ratings and Characteristics
Mechanical Date
●
●
Case: JEDEC SOD-123FL molded plastic
IF(AV)
0.3A
body over glass passivated chip
VRRM
50 V to 1000 V
Terminals: Solder plated, solderable per
IFSM
10A
J-STD-002B and JESD22-B102D
IR
●
y Laser band denotes cathode end
Polarity:
VF
1.0V,, 1.3V,, 1.7V
●
Weight: 0.017gram
Tj max.
150 °C
5 μA
Maximum Ratings & Thermal Characteristics
(TA = 25 °C unless otherwise noted)
Symbol
DHE
0.3A
DHE
0.3B
DHE
0.3D
DHE
0.3E
DHE
0.3G
DHE
0.3J
DHE
0.3K
DHE
0.3M
UNIT
Maximum repetitive peak reverse
voltage
VRRM
50
100
200
300
400
600
800
1000
V
Maximum RMS voltage
VRMS
35
70
140
210
280
420
560
700
V
Maximum DC blocking voltage
VDC
50
100
200
300
400
600
800
1000
V
Maximum average forward rectified
current
IF(AV)
0.3
A
Peak forward surge current 8.3 ms
single half sine-wave superimposed
on rated load
IFSM
10
A
Thermal resistance from junction to
ambient (1)
RθJA
150
℃/ W
TJ,TSTG
–55 to +150
℃
Items
Operating junction and storage
temperature range
Note 1: Mounted on P.C.B. with 0.036 x 0.06” (0.9 x 1.5mm) copper pad areas.
Electrical Characteristics
(TA = 25 °C unless otherwise noted)
Items
Test conditions
Instantaneous forward voltage
IF=0.3A(2)
Reverse current
Reverse recovery time
VR=VDC
TA=25℃
TA=100℃
IF = 0.5 A , IR = 1.0 A ,
Irr = 0.25 A
Note 2: Pulse test:300μs pulse width,1% duty cycle.
http://www.trr-jx.com
Symbol DHE0.3A~0.3DDHE0.3E~0.3G DHE0.3J~0.3M UNIT
VF
1.0
1.3
5
IR
trr
1.7
μA
50
50
V
75
nS
DHE0.3A~DHE0.3M
Surface Mount Ultra Fast Rectifiers
Characteristic Curves (TA=25 ℃ unless otherwise noted)
http://www.trr-jx.com
DHE0.3A~DHE0.3M
Surface Mount High Efficiency
Recovery rectifiers
Package Outline
Notice
●
Product is intended for use in general electronics applications.
●
Product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure
●
The absolute maximum ratings are rated values and must not be exceeded during operation. The following are the general
mechanisms.
derating methods you design a circuit with a device.
IF(AV) : We recommend that the worst case current be no greater than 80% .
IFSM : This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation, which the general
during the lifespan of the device.
TJ : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at
a TJ of below 125°C.
● TRR is registered trademark of Rising-sun Technology. Rising-sun Technology reserves the right to make changes to any product in this
specification to improve reliability,functional characteristics,or design without notice.
● Rising-sun Technology does not assure any liability arising out of the applications or any product described in this specification.
● Rising-sun Technology advises customers to obtain the latest version of the device information before placing orders to verify that the
required information is current.
http://www.trr-jx.com
Similar pages