RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz MASWSS0192 V1 Features Functional Schematic • Test and Measurement and Low/Medium Power Telecommunication Applications • Low Insertion Loss: 0.18 dB @ 1 GHz • Moderate Isolation: 25 dB @ 1 GHz • Low Power Consumption: < 2 µA @ 2.5 V • Fast Settling for Low Gate Lag Requirements • Lead-Free SC-70 (SOT-363) Package • 100% Matte Tin Plating over Copper • Halogen-Free “Green” Mold Compound • RoHS* Compliant and 260°C Reflow Compatible C=39pF V1 RFC V2 RF1 GND RF2 Description M/A-COM’s MASWSS0192 is a GaAs PHEMT MMIC SPDT switch in a lead-free SC-70 (SOT-363) surface mount plastic package. The MASWSS0192 is ideally suited for applications where very small size and low cost are required. The MASWSS0192 can be used for low / medium power, low loss requirements in all systems operating up to 3 GHz, including PCS, GSM, DCS, Blue Tooth, T&M, and other receive chain applications. PIN 1 C=39pF Pin Configuration Pin No. Pin Name Description 1 RF1 RF Port 1 2 GND Ground 3 RF2 RF Port 2 4 V2 Control 2 5 RFC RF Input 6 V1 Control 1 The MASWSS0192 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Ordering Information 1 Part Number Package MASWSS0192 Bulk Packaging MASWSS0192TR-3000 3000 piece reel MASWSS0192SMB 1. C=39pF Absolute Maximum Ratings 2,3 Sample Board Reference Application Note M513 for reel size information. 2. 3. Parameter Absolute Maximum Input Power (0.5 - 3.0 GHz) 2.5 V Control 5.0 V Control Operating Voltage +25 dBm +34 dBm +8.5 volts Operating Temperature -40 °C to +85 °C Storage Temperature -65 °C to +150 °C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz MASWSS0192 V1 Electrical Specifications: TA = 25°C, VC = 0 V / 2.5 V 4, PIN = +10 dBm, Z0 = 50 Ω 5 4. 5. 6. Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 6 DC - 1.0 GHz DC - 3.0 GHz dB dB — — 0.18 0.35 0.40 0.60 Isolation DC - 1.0 GHz DC - 3.0 GHz dB dB 20.0 9.5 24.0 13.5 — — VSWR DC - 1.0 GHz DC - 3.0 GHz Ratio Ratio — — 1.1:1 1.2:1 — — IP2 1 GHz, Two Tone, +7 dBm / tone, 20 MHz Spacing, 3 V dBm — 93 — IP3 1 GHz, Two Tone, +7 dBm / tone, 20 MHz Spacing, 3 V dBm — 53 — P1dB VC = 0.2 V / 2.7 V VC = 0.2 V / 3.0 V dBm dBm — — 27.5 28.5 — — Trise, Tfall 10% to 90% RF and 90% to 10% RF nS — 22 — Ton, Toff 50% control to 90% RF, 50% control to 10% RF nS — 5 — Transients In-band mV — 36 — Control Current — µA — 0.20 5 RON t > 90 mS after OFF to ON Switching (settled) Ω — 2.50 4.7 Gate Lag |∆Ron| between 15 µS and 90 mS after OFF to ON Switching Ω — 0.15 0.7 Alternate voltage operation of VC = 0 V / 5 V or -5 V / 0 V will yield similar insertion loss, isolation, VSWR, switching, RON, and gate lag results. For positive voltage control, external DC blocking capacitors are required on all RF ports. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 - 3 GHz. Truth Table 7,8 7. 8. Qualification Control V1 Control V2 RFC-RF1 RFC-RF2 1 0 On Off 0 1 Off On Differential voltage, V (state 1) - V (state 0), must be 2.5 V minimum, but must not exceed 8.5 V. 0 = 0 V to 0.5 V; 1 = 2.5 V to 5 V or 0 = -5 V to -2.5 V, 1 = -0.5 to 0 V. Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz MASWSS0192 V1 Typical Performance Curves Isolation Insertion Loss 2.0 45 +25°C -40°C +85°C 40 +25°C -40°C +85°C 1.5 35 30 1.0 25 20 0.5 15 0.0 10 0 1 2 3 4 5 6 0 1 Frequency (GHz) 2 3 4 5 6 Frequency (GHz) S11, S22 Gate Lag (RON vs. Time) Including VCTL, 0-3 V Step 5.0 -5 Vcontrol S22 (dB) S11 (dB) -10 4.5 -15 4.0 -20 3.5 -25 3.0 -30 2.5 2.0 0.00 -35 0 1 2 3 4 5 6 Ron (Ohm) 0.02 0.04 0.06 0.08 0.10 0.12 Time (S) Frequency (GHz) Lead-Free SC-70 (SOT-363)† 3 † Reference Application Note M538 for lead-free solder reflow recommendations. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.