3.0x2.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: AA3020PBC/A BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM The Blue source color devices are made with InGaN on SiC SPACE REQUIRED. Light Emitting Diode. z SUITABLE FOR COMPACT OPTOELECTRONIC Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic APPLICATIONS. z LOW POWER CONSUMPTION. glove when handling the LEDs. z PACKAGE : 2000PCS / REEL. All devices, equipment and machinery must be electrically z MOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAG5693 REV NO: V.1 DATE: JUN/19/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201001650 Selection Guide Dice Part No. AA3020PBC/A Iv (mcd) [2] @ 20 mA Lens Type BLUE (InGaN) Viewing Angle [1] Min. Typ. 2θ1/2 18 60 90° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5693 REV NO: V.1 DATE: JUN/19/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201001650 Blue AA3020PBC/A SPEC NO: DSAG5693 REV NO: V.1 DATE: JUN/19/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201001650 AA3020PBC/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5693 REV NO: V.1 DATE: JUN/19/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201001650 PACKING & LABEL SPECIFICATIONS AA3020PBC/A SPEC NO: DSAG5693 REV NO: V.1 DATE: JUN/19/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201001650