60V Series Resettable Fuse PTC Features Radial leaded devices. Over-current protection High voltage surge capabilities Flame retardant epoxy polymer insulating material meets UL94 V-0 requirement. Available in lead-free version. Meets MSL level 1, per J-STD-020 Dimensions(Unit:mm) Model Fig. Maximum contour size(mm) A B C JK60005 1 5.0 8.5 3 5.10 JK60010 1 5.50 9.5 3 5.10 JK60020 1 7.4 12.7 3 5.10 JK60040 2 7.4 16.2 3 5.10 JK60065 2 9.4 17.8 3 5.10 JK60075 2 10.4 18.4 3 5.10 JK60090 2 11.7 18.4 3 5.10 JK60135 1 14.5 19.6 3 5.10 JK60160 1 16.3 21.3 3 5.10 JK60185 1 17.8 22.9 3 5.10 JK60200 1 17.8 22.9 3 5.10 JK60250 1 21.3 26.4 3 10.2 JK60300 1 21.3 26.4 3 10.2 1 HUAAN D LIMITED www.huaandz.com 60V Series Electrical characteristics(25℃) lhold Part Number JK60005 JK60010 JK60017 JK60020 JK60025 JK60030 JK60040 JK60050 JK60065 JK60075 JK60090 JK60110y JK60110f JK60135 JK60160 JK60185 JK60200 JK60250 JK60300 JK60375 JK60500 (A) 0.05 0.10 0.17 0.20 0.25 0.30 0.40 0.50 0.65 0.75 0.90 1.10 1.10 1.35 1.60 1.85 2.00 2.50 3.00 3.75 5.0 ltrip (A) 0.10 0.20 0.34 0.40 0.50 0.60 0.80 1.00 1.30 1.50 1.80 2.20 2.20 2.70 3.20 3.70 4.00 5.00 6.00 7.50 10.0 Vmax OP Vdc 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 lmax (A) 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 Pd Typ (W) 0.30 0.38 0.48 0.41 0.45 0.49 0.56 0.77 0.88 0.92 0.99 0.15 0.15 0.12 0.09 0.08 0.07 0.05 0.04 0.03 0.02 Maximum Time To Trip Current Time (A) (S) 0.25 5 0.50 5 0.85 5 1.00 5 1.25 5 1.50 5 2.00 5 2.50 5 3.25 5 3.75 5 4.50 5 5.50 8 5.50 8 6.75 8 8.00 8 9.25 8 10.00 8 12.50 8 15.00 8 18.75 24 25.00 24 Resistance Rmin Rmax R1max (Ω) (Ω) (Ω) 7.30 20 30.0 2.50 7.50 12.0 2.00 5.21 8.0 1.50 2.84 4.5 1.00 1.95 3.0 0.76 1.38 2.2 0.55 0.88 1.4 0.50 0.79 1.2 0.31 0.50 0.74 0.25 0.42 0.62 0.20 0.33 0.49 0.15 0.27 0.40 0.15 0.27 0.40 0.12 0.21 0.32 0.09 0.16 0.24 0.08 0.14 0.21 0.07 0.14 0.16 0.05 0.10 0.15 0.04 0.08 0.12 0.03 0.06 0.10 0.02 0.06 0.10 ·IH = Hold current: maximum current device will pass without tripping in 25℃ still air. ·IT = Trip current: minimum current at which the device will trip in 25℃ still air. ·VMAXi = Maximum interrupt voltage device can withstand without damage at rated current. ·IMAX = Maximum fault current device can withstand without damage at rated voltage. ·RMAX = Maximum resistance of device in initial (un-soldered) state. ·RMIN = Minimum resistance of device in initial (un-soldered) state. Operating temperature: -40℃ ~+85℃ [email protected] Specifications are subject to change without notice HUAAN LIMITED 2 www.huaandz.com Tel:+86-755-27465585