4 ITEM 3 CONNECTOR PART NO. 2 IPI CHECK DESCRIPTION 1 See Table 1 KR CONNECTOR 2 UL1061, 26 AWG BLUE 1 EOR CHECK Applicable Tooling BCD TABLE 1 ITEM 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D C NUMBER OF CIRCUITS 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CONNECTOR PART NO. 02KR-6S-P 03KR-6S-P 04KR-6S-P 05KR-6S-P 06KR-6S-P 07KR-6S-P 08KR-6S-P 09KR-6S-P 10KR-6S-P 11KR-6S-P 12KR-6S-P 13KR-6S-P 14KR-6S-P 15KR-6S-P 16KR-6S-P ASSEMBLY PART NUMBER A02KR02KR26E152A A03KR03KR26E152A A04KR04KR26E152A A05KR05KR26E152A A06KR06KR26E152A A07KR07KR26E152A A08KR08KR26E152A A09KR09KR26E152A A10KR10KR26E152A A11KR11KR26E152A A12KR12KR26E152A A13KR13KR26E152A A14KR14KR26E152A A15KR15KR26E152A A16KR16KR26E152A TOTAL WIRE REQUIRED 304.8 mm 457.2 mm 609.6 mm 762 mm 914.4 mm 1,066.8 mm 1,219.2 mm 1,371.6 mm 1,524 mm 1,676.4 mm 1,828.8 mm 1,981.2 mm 2,133.6 mm 2,286 mm 2,438.4 mm C (162.7 +/- 3.0) 152.4 +/- 3.0 1 D 1 PIN 1 2.0 PIN 1 2 B B SCALE 1: 1 DIMENSIONS CUSTOMER NAME All dimensions are in MM with a tolerance of +/- 3.0 unless otherwise specified. A DRAWN BY A DESCRIPTION 2.0 mm Pitch KR Standard Catalog Assembly - 6" Overall Len gth – Pin out: 1 to 1 ASSEMBLY PART NO. STEVEN PILKINGTON REV. DESCRIPTION 4 DATE 3 BY CUSTOMER PART NO. CHECK ED BY SEE TABLE 1 DRAWING NO. & REVISION JUSTIN BAKER 2 REVISED GAM-023 3/3/2016 1