BS03 300N-2C C Ordder Code: BS0300N-22C Version: A0 2013-11--22 Thyyristor Surgge Suppresseer Ex xterior Feaatures Excellent capaability of abso orbing transieent surge Q Quick response to surge volltage（nS Leevel） Eliminates oveervoltage cau used by fast rissing transientts M Moisture sensiitivity level: Level L 1 W Weight 88 mg N degenerattive Non SM MB-T Appplication innformation Package P (Toop View) R RS485/232/4 22 ` B03N2C 1309 1 3 2 d Aggency Approovals I Icon Schematic Syymbol D Description Co ompliance with 2011/65/EU 2 Co ompliance with IEC61249-2-21:2 2003 Partt Number annd Electricaal Parameterr V S ①@ IS IDRM@ VDRM D Part Number N μA V V MAX Piin1,3-2 Pin1 1,3-2 5 25 4 40 BS030 00N-2C mA A V T @ IT V A MAX 800 0 4 2.2 IH CO ② mA pF MIN MAX 50 100 Ab bsolute maxim mum ratings measured at TA= 25ºC RH R = 45%-75% (unless oth herwise noted d). ① Vs is measured at 100KV V/S ② Off-state cap pacitance is measured m at VDC=2V,VRM MS=1V,f=1M MHz 1/5 5 www.benncent.com.cn S Specifications aare subject to ch hange without notice. n Customers should verify actuaal device perforrmance in their specific applications BS03 300N-2C C Ordder Code: BS0300N-22C Version: A0 2013-11--22 Thyyristor Surgge Suppresseer Parrt Numberinng System Mark M BS 0300 0 N 2 C (1) (2) ( 3) (4) (5) B03 3N2C 13 309 (1))Bencent Sem miconductor Surge S Arresteer (2)) Off state volltage,e.g:0300 0=30×100=3 30V. (3)) Package : SM MB-T B03N2C: P Part Number (4)) 2 Lines Pro otection 1309 : Septtempter,2013 (5)) Rating Surrge Voltage: 6KV(10/70 00μS) V-II Curve P Parameters Definition n VDRM Peaak off-state voltage IDRM O Off-state Currrent VS S Switching Volltage IS S Switching Currrent IH H Holding Currrent VT O On-state volttage IT On-state currrent CO Offf-state capaciitance +I IT IS IH IDRM -V +V VT VDRM VS -I Surgge Ratings Cu urrent Wavefform 2/10μs 8/20μs 10/160μs 5/32 20μs* 10/1000μs Vo oltage Wavefform 2/10μs 1.2/50 0μs 10/160μs 10/7 700μs* 10/1000μs Ipp 500A 400A A 200A 15 50A 100A -Peaak pulse curreent rating(IPP)is ) repetitive and a guaranteeed for the lifee of the produ uct; -Ben ncent only makes m the test for 5/320μs@ @150A*(10/ /700μs@6KV V), but for oth her IPP valuee derived from m experiencee is just for reference r onlly. Bencent will w not take any a obligation n for these paarameters, so o before apply ying our partts, please mak ke sure to verify the paraameters listed d in the abovee table. Therrmal Considderations Sym mbol T TJ T TS 2/5 5 Parameter Opeerating Junctiion Tem mperature Ran nge Storaage Temperatture Range www.benncent.com.cn Prroduct Charracteristics Vaalue Un nit Lead Materrial -40 to o +150 ℃ Body Materrial -60 to o +150 ℃ Terminal Fin nish Copper Alloy L recognized epoxy e meetin ng UL flam mmability classification 94V V-0 100% Matte--Tin Plated S Specifications aare subject to ch hange without notice. n Customers should verify actuaal device perforrmance in their specific applications BS03 300N-2C C Ordder Code: BS0300N-22C Thyyristor Surgge Suppresseer Version: A0 2013-11--22 Typpical Characcteristics 3/5 5 www.benncent.com.cn S Specifications aare subject to ch hange without notice. n Customers should verify actuaal device perforrmance in their specific applications BS03 300N-2C C Ordder Code: BS0300N-22C Version: A0 2013-11--22 Thyyristor Surgge Suppresseer Ennvironmentaal Charactteristics T Testing itemss Technicaal standards Hiigh temperatu ure Reverse Bias B Test Temperaature: 150±3℃ ℃ Bias=80% %VDRM Time:16 68H Temperaature: 150℃ Time:16 68H Temperaature: From -40℃ to125℃ ℃ Dwell tiime ：30min n,10cycles Hiigh Temperatture Life Testt Hiigh-low Temp perature Cyclle test Hiigh Temperatture &High Humidity H Testt Temperaature: 85℃Hu umidity:85% Test tim me:168H Prressure cookeer Test Temperaature: 121℃，2atm. Hum midity:100% Test tim me:24H Reesistance of soldering s heatt Temperaature: 260±5℃ ℃ Time off dip solderingg：10s，3tim mes ms can be speecified by cusstomer’s speccial request Note: The abovve testing item Prooduct Dimeensions Botto om view H I Side view REF mm inch A 5.4±0.3 0..213±0.012 B 3.3±0.3 0..130±0.012 C 0.7±0.03 3 0..028±0.001 D 2.0±0.2 0..079±0.008 E 0.9±0.2 0..035±0.008 F 1.32±0.3 3 0..052±0.012 G 1.13±0.3 3 0..045±0.012 H 2±0.3 0..079±0.012 I 0.25±0.05 5 0..010±0.002 REF mm inch A 2.8 0.134 B 2.5 0.098 C 1.6 0.059 D 1.8 0.059 E 0.9 0.035 F 0.8 0.032 Reecommended Solderingg Pad 4/5 5 www.benncent.com.cn S Specifications aare subject to ch hange without notice. n Customers should verify actuaal device perforrmance in their specific applications BS03 300N-2C C Ordder Code: BS0300N-22C Version: A0 2013-11--22 Thyyristor Surgge Suppresseer Refflow Profilee Pre Heat Pb--Free assembly y perature Min Temp 150 0°C Temp perature Max 200 0°C Timee （min to max） 60 – 180 secs Aveerage ramp up rate（Liquid） ）Tamp （T TL） to peal TS(m max) to TL - Ramp-up R Rate - Temperature T (T TL) Refflow (L Liquid) - Temperature T (T TL) Peaak Temperaturee (TP) 3°C C/second max Tem mperature (TP) 7°C 217 60 – 150 seconds TL TS(max) Ramp-down Preheat TS(min) TS TL 8 – 15 seconds Ram mp-down Ratee 6°C C/second max Tim me 25°C to peaak Temperaturee (TP) 8 minutes m Max. Do not exceed 260 0°C 5/5 5 TL 3°C C/second max Criticaal Zone TL to TP Raamp-up 260 0+0/-5 °C Tim me within 5°C of actual peak k Pacckage Reeel TP TP p Temperature Reflow w Condition 25 Time t time to peak temperaature Informaation REF mm m inch A 3.65+/ /-0.3 0.144+/-0.01 12 B 5.69+/ /-0.3 0.244+/0-.01 12 d 1.5+/ /-0.1 0.059+/-0.00 04 D 330.0 13.0 D1 100+ +/-3 3.937+/-0.11 18 D2 13+/--0.3 0.512+/-0.01 12 E 1.5+/ /-0.2 0.059+/-0.00 08 F 5.65+/ /-0.2 0.222+/-0.00 08 P 8.0+/ /-0.2 0.315+/-0.00 08 P0 4.0+/ /-0.2 0.157+/-0.00 08 P1 2.0+/ /-0.2 0.079+/-0.00 08 W 12.0+/ /-0.2 0.472+/-0.00 08 W1 16.8+/ /-2.0 0.661+/-0.07 79 OUTLINE REEL R (P PCS) PER CART TON (PCS) REEL DIAMETERS D S (mm) L W H TAPING 3 3,000 24,000 0 330 360 0 360 0 380 0 www.benncent.com.cn CARTON SIZE(mm) S S Specifications aare subject to ch hange without notice. n Customers should verify actuaal device perforrmance in their specific applications