VS-MBRB3030CTLPbF Vishay High Power Products Schottky Rectifier, 2 x 15 A FEATURES D2PAK Base common cathode 2 • • • • • 2 Common cathode • 3 Anode 2 1 Anode 1 • • • • PRODUCT SUMMARY 150 °C TJ operation Center tap configuration Very low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Guard ring for enhanced ruggedness and long term reliability Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Halogen-free according to IEC 61249-2-21 definition Compliant to RoHS directive 2002/95/EC AEC-Q101 qualified DESCRIPTION IF(AV) 2 x 15 A VR 30 V This center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IF(AV) VALUES UNITS 30 A Rectangular waveform 30 V 1100 A VRRM IFSM tp = 5 μs sine VF 15 Apk, TJ = 125 °C (per leg) TJ Range 0.34 V - 55 to 150 °C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VS-MBRB3030CTLPbF UNITS 30 V VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 SYMBOL TEST CONDITIONS VALUES UNITS 15 per leg IF(AV) 50 % duty cycle at TC = 121 °C rectangular waveform per device 30 A Maximum peak one cycle non-repetitive surge current per leg See fig. 7 IFSM Non-repetitive avalanche energy per leg EAS TJ = 25 °C, IAS = 3 A, L = 2.9 mH 13 mJ IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 3 A Repetitive avalanche current per leg Document Number: 94309 Revision: 23-Mar-10 5 μs sine or 3 μs rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied For technical questions, contact: [email protected] 1100 360 www.vishay.com 1 VS-MBRB3030CTLPbF Vishay High Power Products Schottky Rectifier, 2 x 15 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 15 A Maximum forward voltage drop per leg See fig. 1 VFM (1) 15 A IRM (1) Threshold voltage VF(TO) Forward slope resistance rt Maximum junction capacitance per leg 0.55 0.34 TJ = 125 °C TJ = 25 °C 2 183 TJ = TJ maximum CT VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Typical series inductance per leg LS Measured lead to lead 5 mm from package body Maximum voltage rate of change dV/dt Rated VR V 0.45 VR = Rated VR TJ = 125 °C UNITS 0.47 TJ = 25 °C 30 A 30 A Maximum reverse leakage current per leg See fig. 2 VALUES mA 0.22 V 6.76 mΩ 2840 pF 8.0 nH 10 000 V/μs VALUES UNITS - 55 to 150 °C Note (1) Pulse width < 300 μs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range Maximum thermal resistance, junction to case TEST CONDITIONS TJ, TStg per leg per package Typical thermal resistance, case to heatsink RthJC DC operation RthCS Mounting surface, smooth and greased Approximate weight Mounting torque Marking device www.vishay.com 2 minimum maximum 2.0 1.0 2 g 0.07 oz. 6 (5) kgf · cm (lbf · in) 12 (10) Case style D2PAK For technical questions, contact: [email protected] °C/W 0.50 MBRB3030CTL Document Number: 94309 Revision: 23-Mar-10 VS-MBRB3030CTLPbF Schottky Rectifier, 2 x 15 A Vishay High Power Products 1000 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) 1000 100 TJ = 150 °C TJ = 125 °C TJ = 25 °C 10 TJ = 150 °C 100 TJ = 125 °C TJ = 100 °C 10 TJ = 75 °C 1 TJ = 50 °C 0.1 TJ = 25 °C 0.01 1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 1.8 5 10 15 20 25 30 VR - Reverse Voltage (V) VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 10 000 TJ = 25 °C 1000 100 0 5 10 15 20 25 35 30 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 10 1 PDM t1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 t2 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.1 0.01 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94309 Revision: 23-Mar-10 For technical questions, contact: [email protected] www.vishay.com 3 VS-MBRB3030CTLPbF 16 150 Average Power Loss (W) Allowable Case Temperature (°C) Vishay High Power Products Schottky Rectifier, 2 x 15 A 140 DC 130 Square wave (D = 0.50) 80 % Rated VR applied 120 110 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 12 RMS limit 8 4 DC See note (1) 100 0 0 5 10 15 20 25 30 0 5 10 15 20 25 30 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L D.U.T. IRFP460 Rg = 25 Ω Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V (1) www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 94309 Revision: 23-Mar-10 VS-MBRB3030CTLPbF Schottky Rectifier, 2 x 15 A Vishay High Power Products ORDERING INFORMATION TABLE Device code VS- MBR 2 1 B 30 30 CT L 3 4 5 6 7 1 - HPP product suffix 2 - Schottky MBR series 3 - B = D2PAK 4 - Current rating (30 = 30 A) 5 - Voltage rating (30 = 30 V) 6 - CT = Center tap (dual) 7 - L = Low VF 8 - TRL PbF 8 9 None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 9 - PbF = Lead (Pb)-free (for D2PAK tube) P = Lead (Pb)-free (for D2PAK TRR and TRL) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95046 Part marking information www.vishay.com/doc?95054 Packaging information www.vishay.com/doc?95032 Document Number: 94309 Revision: 23-Mar-10 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1