Printed Circuit Triple Output Transformers Low Profile Printed Circuit Mount SM For 5 VDC and ±12 VDC or ±15 VDC Regulated Power MPL Series General Specifications ■ Power – 6 VA and 12 VA ■ Dielectric Strength – 1500VRMS Hipot ■ Primaries – Dual primaries (115/230V nominal - 50/60 Hz) Input range (100V to 130V or 200V to 260V - 50/60 Hz) ■ Secondaries – Dual complementary outputs (5 VDC with ±12 VDC or 5 VDC with ±15 VDC) ■ Electrostatic Shield – Not necessary, split bobbin construction ■ Magnetic Field – Reduced magnetic radiation ■ Height – .85 and 1.065 inches high ■ Insulation – Class B insulation (130°C) Agency Standards ■ UL recognized to UL 506 (File #E63829) ■ CSA certified to C22.2 #66 (File #LR 51265) CV MPL TYPES (Dual 115/230V Primary is Standard) DC Output Suggested Components Part Number Primary 50/60 Hz Regulator I MPL-6-12 5 VDC 135mA ±12 VDC 40mA 6 MPL-6-15 5 VDC 135mA ±15 VDC 35mA 6 MPL-12-12 5 VDC 270mA ±12 VDC 85mA 12 MPL-12-15 5 VDC 270mA ±15 VDC 70mA 12 Regulator II VA (Size) C1 C2 C3 C4 1000MFD 20V 1000MFD 20V 2100MFD 30V 2100MFD 30V 2.7MFD 20V 2.7MFD 20V 2.7MFD 20V 2.7MFD 20V 150MFD 50V 150MFD 50V 250MFD 50V 250MFD 50V 10MFD 20V 10MFD 20V 10MFD 20V 10MFD 20V D1(2) D2(4) IC1* IC2* 1N4001 1N4002 LM342P-5.0 LM326N 1N4001 1N4002 LM342P-5.0 LM325N 1N4001 1N4002 LM341P-5.0 LM326N 1N4001 1N4002 LM341P-5.0 LM325N *National Semiconductor VA (Size) 6 12 L W H A B C Wgt 1.87˝ 47.6mm 2.50˝ 63.5mm 1.56˝ 39.7mm 2.00˝ 50.8mm 0.850˝ 21.6mm 1.065˝ 27.1mm 1.600˝ 40.6mm 2.000˝ 50.8mm 0.375˝ 9.5mm 0.500˝ 12.7mm 0.187˝ 4.7mm 0.250˝ 6.4mm 0.43 lbs 0.20 kg 0.68 lbs 0.31kg Signal Transformer CALL: 516-239-5777 • FAX: (24hrs) 516-239-7208 500 Bayview Avenue, Inwood, New York 11096 Signal Catalog page 19