CKR48 Series • Ratings from 10A to 30A @ 530 VAC • Slim 22.5mm (width) package • SCR output for heavy industrial loads • LED input status indicator • AC or DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Description 4-32 VDC Control 10 A 20 A 30 A CKRD4810 CKRD4820 CKRD4830 90-280 VAC Control CKRA4810 CKRA4820 CKRA4830 18-36 VAC Control CKRA4810E CKRA4820E CKRA4830E AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description 10 A 20 A 30 A Operating Voltage (47-63Hz) [Vrms] 48-530 48-530 48-530 1200 1200 1200 Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 10 10 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500 Maximum Load Current [Arms] 10 20 30 Minimum Load Current [Arms] 0.15 0.15 0.15 Maximum Surge Current (16.6ms) [Apk] 120 250 1200 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 Maximum I² t for Fusing (8.3 msec) [A² sec] 60 260 6000 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 INPUT SPECIFICATIONS (1) Description CKRD48xx CKRA48xx CKRA48xxE 4.0-32 VDC 90-280 Vrms 18-36 Vrms Minimum Turn-On Voltage 4.0 VDC 90 Vrms 18 Vrms Minimum Turn-Off Voltage 1.0 VDC 10 Vrms 4.0 Vrms Typical Input Current (4) 8-12 mA 2 mA @ 120 Vrms, 4 mA @ 240 Vrms 10 mA @ 24 Vrms Maximum Turn-On Time [msec] (3) 1/2 Cycle 10 10 Maximum Turn-Off Time [msec] 1/2 Cycle 40 40 Control Voltage Range GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000Vrms Minimum Insulation Resistance (@ 500 V DC) 109 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40ºC to 80ºC Ambient Storage Temperature Range -40ºC to 125ºC Status Indicator Display Weight (typical) Encapsulation Terminals Maximum Wire Size: Recommended Terminal Screw Torque Range: Min. Side by Side Spacing GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Turn-on time for DC control random turn-on versions is 0.02 msec 4) Input circuitry for DC control version incorporates active current limiter. WIRING DIAGRAM Green LED 10 oz. (280g) Thermally Conductive Epoxy Box Clamp Type AWG # 10 (3mm) 5.0-6.0 in lb (0.6-0.7 Nm) 0.8 inch (20mm) MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E116950 LR81689 129156ÜG Rev. 110211 ANNEX - ENVIROMENTAL INFORMATION