DC/DC Converters CTDD2010DF-DU1K-1 Series Fixed Input Isolated & Unregulated 1W Output, Dual Output Not shown at actual size. RoHS Compliant ctparts.com SPECIFICATIONS Part Number Vin Nom. (VDC) Vout (VDC) Iout Max. (mA) Iout Min. (mA) Effi. Typ. (%) CTDD2010DF-0505-DU1K-1 CTDD2010DF-0509-DU1K-1 CTDD2010DF-0512-DU1K-1 CTDD2010DF-0515-DU1K-1 5 5 5 5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 ±5 ±9 ±12 ±15 ±100 ±56 ±42 ±33 ±10 ±6 ±5 ±4 72 75 78 79 CTDD2010DF-1205-DU1K-1 CTDD2010DF-1209-DU1K-1 CTDD2010DF-1212-DU1K-1 CTDD2010DF-1215-DU1K-1 12 12 12 12 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 ±5 ±9 ±12 ±15 ±100 ±56 ±42 ±33 ±10 ±6 ±5 ±4 74 76 79 80 CTDD2010DF-2405-DU1K-1 CTDD2010DF-2409-DU1K-1 CTDD2010DF-2412-DU1K-1 CTDD2010DF-2415-DU1K-1 24 24 24 24 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±9 ±12 ±15 ±100 ±56 ±42 ±33 ±10 ±6 ±5 ±4 74 76 80 81 Input Range (VDC) ISOLATION SPECIFICATIONS Item Test Condition MIN Isolation Voltage Tested for 1 minute 1000 TYP MAX Units VDC Isolation Resistance Test at 500VDC 1000 MΩ OUTPUT SPECIFICATIONS Item Test Condition MIN Output Power FEATURES Efficiency: To 80% Temperature Range: -40°C to +85°C Isolation: 1KVDC Power Density: 0.70W/cm3 Package: UL94-V0 Miscellaneous: No heat sink required. No external component required. Industry standard pinout. Positive & Negative Voltage Output. Small footprint. DIP Package Style. Low Cost. Samples available. TYP 0.1 Line regulation For Vin change of 1% Load regulation 10% to 100% full load Output voltage accuracy 10 MAX Units 1 W 1.2 % 15 % See tolerance envelope graph Temperature drift 100% full load Output ripple 20MHz Bandwidth 50 Switching frequency Full load, nominal input 100 0.03 %/°C 75 mVp-p KHz Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output unless otherwise specified. TYPICAL CHARACTERISTICS CHARACTERISTICS Temperature Derating Graph +10% +5% Nominal Voltage Typic a l Load Line +2.5% -2.5% -7.5% 10% 50% 100% Output Current(%) CENTRAL Technologies 01.09.07 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice Output Power(%) Tolerance Envelope Graph Output Voltage(%) Short Circuit Protection: 1 second Temperature Rise at Full Load: 25°C Max. 15°C Typ. Cooling: Free air convection Operating Temperature Range: -40°C to +85°C Storage Temperature Range: -55°C to +125°C Lead temperature: 300°C (1.5mm from case for 10 seconds) Storage Humidity Range: < 95% Case Material: Plastic (UL94-V0) MTBF: >3,500,000 hours Miscellaneous: RoHS Compliant. 120 100 80 60 Safe Operating Area 40 20 0 -40 0 40 80 120 Ambient Temperature(°C) DC/DC Converters ctparts.com CTDD2010DF-DU1K-1 Series Fixed Input Isolated & Unregulated 1W Output, Dual Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS CTDD2010DF-DU1K-1 Package 20.40 7.00 Side View 4.10 12 5 6 7 7.62 10.0 Bottom View 8 14 15.24 CTDD2010DF-DU1K-1 Footprint ø1.00+0.15/-0 2.54 2.54 8 14 1 2 5 6 7 Note: All pins on a 2.54mm pitch; All pin diameters are 0.50mm; all dimensions in mm PIN CONNECTIONS Pin Function 1 2 5 6 7 8, 14 Vin GND 0V +Vo -Vo NC Top View 14 1 8 2 5 6 7 CENTRAL Technologies 01.09.07 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice