GBJ15D thru GBJ15M Glass Passivated Single Phase Bridge Rectifiers Reverse Voltage 200 to 1000V Forward Current 15.Amp Features y y y y y Circuit Glass passivated die construction Ideal for printed circuit boards Plastic material used carries UL flammability recognition 94V-0 High surge current capability High temperature soldering guaranteed: 265℃ /10 seconds, 0.375” (9.5mm) lead length, 5lbs. (2.3kg) tension Mechanical Data Case: Molded plastic case Terminals: Plated leads solderable per MIL-STD-750, Method 2026 - + Module Type TYPE GBJ15D GBJ15G GBJ15J GBJ15K GBJ15M Polarity: Marked on Body Mounting Position: Any VRRM VRSM 200V 400V 600V 800V 1000V 300V 500V 700V 900V 1100V Maximum Ratings and Thermal Characteristics (TA = 25℃ unless otherwise noted) Symbol Conditions Values 15 Maximum average forward output rectified current Tc =100℃ IF(AV) Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) IFSM i2t Rating for fusing (t<8.3ms) a.c.50HZ;r.m.s.;1min Visol Maximum thermal resistance per leg TOR Tj, TSTG Weight Mounting Torque (Recommended torque:0.5 N.m) Operating Junction and storage temperature range Approximate Weight Electrical Characteristics (TA = 25℃ unless otherwise noted) Symbol Conditions IR Notes: A 240 A 240 A2s 2500 V (1) RθJA RθJC VF Units Maximum Instantaneous Forward Voltage per leg Maximum DC reverse current at rated DC blocking voltage per leg IFM =7.5A TA = 25℃ TA = 125℃ 22 1.5 (2) ℃/W 0.8 -55 to +150 7.0 N.m ℃ g Values Units 1.0 V 5.0 500 µA (1) Junction to ambient without heatsink (2) Junction to case with heatsink (3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw Document Number: GBJ15D thru GBJ15M Jan.12, 2011 www.smsemi.com 1 GBJ15D thru GBJ15M Performance Curves IF, INSTANTANEOUS FORWAR CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 25 20 15 10 5 Resistive or Inductive load 0 50 100 TA, TEMPERATURE (ºC) Fig.1 Forward Current Derating Curve 300 150 Cj, JUNCTION CAPACITANCE (pF) 240 Tj=25ºC 180 120 60 0 1 10 1.0 Tj=25ºC Pulse Width=300μs 0.1 0 0.2 0.6 1.0 1.4 1.8 VF, INSTANTANEOUSFWDVOLTAGE (V) Fig.2 Typical Fwd Characteristics, per element 1000 Single half-sine-wave (JEDEC method) 100 Tj=25ºC f =1MHZ 1 10 100 NUMBER OF CYCLES AT 60Hz Fig.3 Maximum Non-Repetitive Surge Current IR, INSTANTANEOUS REVERSE CURRENT (mA) IFSM, PEAK FORWARD SURGE CURRENT (A) 0 100 1 10 VR, REVERSE VOLTAGE (V) Fig.4 Typical Junction Capacitance 100 1000 100 10 Tj=100ºC 1.0 0.1 Tj=25ºC 0.01 0 20 40 60 80 100 120 140 RATED PERCENT OF PEAK REVERSE VOLTAGE (%) Fig.5 Typical Reverse Characteristics Document Number: GBJ15D thru GBJ15M Jan.12, 2011 www.smsemi.com 2 GBJ15D thru GBJ15M Package Outline Information CASE: GBJ 1.193(30.3) 1.170(29.7) 0.150(3.8) 0.134(3.4) 0.134(3.4) 0.118(3.0) 0.799(20.3) 0.775(19.7) 0.165(4.2) 0.150(3.8) + ~ ~ 0.197 (5.0) - 0.106(2.7) 0.091(2.3) 0.094(2.4) 0.079(2.0) 0.043(1.1) 0.035(0.9) 0.697(17.7) 0.677(17.2) 0.441(11.2) 0.425(10.8) 0.189(4.8) 0.173(4.4) 0.114(2.9) 0.098(2.5) 0.031(0.8) 0.024(0.6) 0.409(10.4) 0.303(7.7) (2×) 0.394(10.0) 0.287(7.3) Dimensions in inches (mm) Document Number: GBJ15D thru GBJ15M Jan.12, 2011 www.smsemi.com 3