Anpec APM9932 Dual enhancement mode mosfet (n-and p-channel) Datasheet

APM9932/C
Dual Enhancement Mode MOSFET (N-and P-Channel)
Features
•
Pin Description
N-Channel
20V/15A, RDS(ON)=12mΩ(typ.) @ VGS=10V
RDS(ON)=17mΩ(typ.) @ VGS=4.5V
•
P-Channel
S1
1
8
D1
S1
1
8
D
G1
2
7
D1
G1
2
7
D
S2
3
6
D2
S2
3
6
D
G2
4
5
D2
G2
4
5
D
-20V/-6A, RDS(ON)=30mΩ(typ.) @ VGS=-4.5V
RDS(ON)=45mΩ(typ.) @ VGS=-2.5V
•
SO-8
SO-8
Super High Dense Cell Design for Extremely
D1
Low RDS(ON)
•
•
APM9932C
APM9932
D
D1
Reliable and Rugged
SO-8 Package
G1
Applications
G1
S1
S1
N-Channel MOSFET
•
Power Management in Notebook Computer ,
G2
S2
N- and P-Channel
MOSFET
S2
Portable Equipment and Battery Powered
Systems.
G2
D2
D2
P-Channel MOSFET
Ordering and Marking Information
APM9932/C
Package Code
K : SO-8
Operation Junction Temp. Range
C : -55 to 150°C
Handling Code
TR : Tape & Reel
Handling Code
Temp. Range
Package Code
APM9932/C K :
APM9932/C
XXXXX
XXXXX - Date Code
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
1
www.anpec.com.tw
APM9932/C
Absolute Maximum Ratings
Symbol
(TA = 25°C unless otherwise noted)
Parameter
N-Channel
P-Channel
VDSS
Drain-Source Voltage
20
-20
VGSS
Gate-Source Voltage
±16
±12
ID*
Maximum Drain Current – Continuous
15
-6
IDM
Maximum Drain Current – Pulsed
30
-10
TA=25°C
2.5
2.5
PD
Maximum Power Dissipation
TA=100°C
1.0
1.0
TJ
Maximum Junction Temperature
TSTG
Storage Temperature Range
RθjA
Thermal Resistance – Junction to Ambient
Unit
V
A
W
150
°C
-55 to 150
°C
50
°C/W
* Surface Mounted on FR4 Board, t ≤ 10 sec.
Electrical Characteristics
Symbol
(TA = 25°C unless otherwise noted)
Parameter
APM9932/C
Test Condition
Min.
Typ. Max.
Unit
Static
BVDSS
Drain-Source Breakdown
Voltage
IDSS
Zero Gate Voltage Drain
Current
VGS(th)
Gate Threshold Voltage
IGSS
Gate Leakage Current
N-Ch
VGS=0V , IDS=250µA
20
P-Ch
-20
VDS=18V , VGS=0V
N-Ch
1
VDS=-18V , VGS=0V
P-Ch
-1
VDS=VGS , IDS=250µA
N-Ch
0.6
1.3
VDS=VGS , IDS=-250µA
P-Ch
-0.6
-1.3
VGS=±16V , VDS=0V
N-Ch
±100
VGS=±12V , VDS=0V
P-Ch
±100
VGS=10V , IDS=9A
RDS(ON)a
Drain-Source On-state
VGS=4.5V , IDS=7A
Resistance
VGS=-4.5V , IDS=-6A
VGS=-2.5V , IDS=-5A
VSDa
Notes
a
Diode Forward Voltage
N-Ch
P-Ch
V
12
18
17
27
30
42
45
60
ISD=5A , VGS=0V
N-Ch
0.6
1.3
ISD=-2A , VGS=0V
P-Ch
-0.6
-1.3
µA
V
nA
mΩ
V
: Pulse test ; pulse width ≤300µs, duty cycle ≤ 2%
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
2
www.anpec.com.tw
APM9932/C
Electrical Characteristics (Cont.)
Symbol
Parameter
(TA = 25°C unless otherwise noted)
APM9932/C
Test Condition
Min.
Typ. Max.
Unit
Dynamica
Qg
Qgs
Qgd
td(ON)
Tr
td(OFF)
Tf
Ciss
Coss
Crss
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Turn-on Delay Time
Turn-on Rise Time
Turn-off Delay Time
N-Channel
N-Ch
14
22
VDS=10V , IDS= 6A
P-Ch
19
25
VGS=4.5V
N-Ch
5
P-Channel
P-Ch
4.1
VDS=-4V , IDS=-1A
N-Ch
2.8
VGS=-4.5V
P-Ch
1.6
N-Channel
N-Ch
6
12
VDD=10V , IDS=1A ,
P-Ch
23
45
VGEN=4.5V , RG=10Ω
N-Ch
5
10
P-Ch
45
80
P-Channel
N-Ch
16
40
VDD=-4V , IDS=-1A ,
P-Ch
45
90
VGEN=-4.5V , RG=10Ω
N-Ch
5
20
P-Ch
32
55
N-Channel
N-Ch
1225
VGS=0V , VDS=15V
P-Ch
1400
Frequency=1.0MHz
N-Ch
330
P-Channel
P-Ch
520
VGS=0V , VDS=-4V
N-Ch
220
Frequency=1.0MHz
P-Ch
320
Turn-off Fall Time
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
nC
ns
pF
Notes
a
: Guaranteed by design, not subject to production testing
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
3
www.anpec.com.tw
APM9932/C
Typical Characteristics
N-Channel
Output Characteristics
Transfer Characteristics
20
20
VGS=3,4,5,6,7,8,9,10V
ID-Drain Current (A)
ID-Drain Current (A)
VGS=2.5V
16
12
8
V GS=2V
15
10
TJ=125°C
5
4
0
0
2
4
6
8
0
0.0
10
0.5
VDS - Drain-to-Source Voltage (V)
RDS(ON)-On-Resistance (Ω)
1.25
1.00
0.75
0.50
0.25
0
25
50
75
2.5
3.0
0.025
0.020
VGS=4.5V
0.015
V GS=10V
0.010
0.005
0.000
100 125 150
Tj - Junction Temperature (°C)
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
2.0
0.030
IDS=250uA
-25
1.5
On-Resistance vs. Drain Current
1.50
0.00
-50
1.0
VGS - Gate-to-Source Voltage (V)
Threshold Voltage vs. Junction Temperature
VGS(th)-Threshold Voltage (V)
(Normalized)
TJ=-55°C
TJ=25°C
0
4
8
12
16
20
ID - Drain Current (A)
4
www.anpec.com.tw
APM9932/C
Typical Characteristics (Cont.)
N-Channel
On-Resistance vs. Gate-to-Source Voltage
2.0
ID=15A
0.14
RDS(ON)-On-Resistance (Ω)
(Normalized)
RDS(ON)-On-Resistance (Ω)
0.16
On-Resistance vs. Junction Temperature
0.12
0.10
0.08
0.06
0.04
0.02
0.00
VGS=10V
ID=15A
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0
1
2
3
4
5
6
7
8
9
0.4
-50
10
VGS - Gate-to-Source Voltage (V)
-25
0
75
100 125
150
Capacitance
1800
V DS=10V
ID=6A
Frequency=1MHz
1500
8
Capacitance (pF)
VGS-Gate-Source Voltage (V)
50
TJ - Junction Temperature (°C)
Gate Charge
10
25
6
4
Ciss
1200
900
600
Coss
2
300
Crss
0
0
5
10
15
20
25
0
30
QG - Gate Charge (nC)
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
0
5
10
15
20
VDS - Drain-to-Source Voltage (V)
5
www.anpec.com.tw
APM9932/C
Typical Characteristics (Cont.)
N-Channel
Single Pulse Power
20
80
10
70
60
TJ=150°C
Power (W)
IS-Source Current (A)
Source-Drain Diode Forward Voltage
TJ=25°C
1
50
40
30
20
10
0.1
0.0
0.2
0.4
0.6
0.8
1.0
0
0.01
1.2
0.1
VSD -Source-to-Drain Voltage (V)
1
10
30
Time (sec)
Normalized Effective Transient
Thermal Impedance
Normalized Thermal Transient Impedence, Junction to Ambient
1
Duty Cycle=0.5
D=0.2
D=0.1
0.1
D=0.05
1.Duty Cycle, D=t1/t2
2.Per Unit Base=RthJA=50°C/W
3.TJM-TA=PDMZthJA
D=0.02
SINGLE PULSE
0.01
1E-4
1E-3
0.01
0.1
1
10
30
Square Wave Pulse Duration (sec)
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
6
www.anpec.com.tw
APM9932/C
Typical Characteristics
P-Channel
Output Characteristics
Transfer Characteristics
10
10
-VGS=2,3,4,5,6,7,8,9,10V
-ID-Drain Current (A)
-ID-Drain Current (A)
8
6
-VGS=2V
4
2
8
6
4
TJ=125°C
2
TJ=25°C
0
0
1
2
3
4
5
6
7
0
0.0
8
0.5
-VDS - Drain-to-Source Voltage (V)
TJ=-55°C
1.0
1.5
2.0
2.5
3.0
-VGS - Gate-to-Source Voltage (V)
Threshold Voltage vs. Junction Temperature
On-Resistance vs. Drain Current
1.50
0.08
RDS(ON)-On-Resistance (Ω)
-VGS(th)-Threshold Voltage (V)
(Normalized)
-IDS=250uA
1.25
1.00
0.75
0.50
0.25
0.07
0.06
-VGS=2.5V
0.05
0.04
-VGS=4.5V
0.03
0.02
0.01
0.00
-50
-25
0
25
50
75
0.00
100 125 150
Tj - Junction Temperature (°C)
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
0
1
2
3
4
5
6
7
8
9
10
-ID - Drain Current (A)
7
www.anpec.com.tw
APM9932/C
Typical Characteristics (Cont.)
P-Channel
On-Resistance vs. Gate-to-Source Voltage
1.8
-ID=6A
RDS(ON)-On-Resistance (Ω)
(Normalized)
RDS(ON)-On-Resistance (Ω)
0.12
On-Resistance vs. Junction Temperature
0.10
0.08
0.06
0.04
0.02
0.00
1
2
3
4
5
6
7
8
9
-VGS=4.5V
-ID=6A
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-50
10
-25
-VGS - Gate-to-Source Voltage (V)
0
100 125
150
2000
-VDS=4V
-ID=1A
Frequency=1MHz
1600
Capacitance (pF)
-VGS-Gate-Source Voltage (V)
75
Capacitance
4
3
2
1
0
50
TJ - Junction Temperature (°C)
Gate Charge
5
25
Ciss
1200
800
Coss
400
0
4
8
12
16
0
20
QG - Gate Charge (nC)
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
Crss
0
2
4
6
8
10
-VDS - Drain-to-Source Voltage (V)
8
www.anpec.com.tw
APM9932/C
Typical Characteristics (Cont.)
P-Channel
Source-Drain Diode Forward Voltage
Single Pulse Power
80
60
Power (W)
-IS-Source Current (A)
10
1
TJ=150°C
TJ=25°C
0.1
40
20
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0
0.01
1.4
0.1
-VSD -Source-to-Drain Voltage (V)
1
10
30
Time (sec)
Normalized Effective Transient
Thermal Impedance
Normalized Thermal Transient Impedence, Junction to Ambient
1
Duty Cycle=0.5
D=0.2
D=0.1
0.1
D=0.05
1.Duty Cycle, D=t1/t2
2.Per Unit Base=RthJA=50°C/W
3.TJM-TA=PDMZthJA
D=0.02
SINGLE PULSE
0.01
1E-4
1E-3
0.01
0.1
1
10
30
Square Wave Pulse Duration (sec)
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
9
www.anpec.com.tw
APM9932/C
Packaging Information
E
e1
0.015X45
SOP-8 pin ( Reference JEDEC Registration MS-012)
H
e2
D
A1
A
1
L
0.004max.
Dim
Mi ll im et er s
Inche s
A
Min .
1. 35
Max .
1. 75
Min.
0. 053
Max .
0. 069
A1
D
E
0. 10
4. 80
3. 80
0. 25
5. 00
4. 00
0. 004
0. 189
0. 150
0. 010
0. 197
0. 157
H
L
e1
e2
5. 80
0. 40
0. 33
6. 20
1. 27
0. 51
0. 228
0. 016
0. 013
0. 244
0. 050
0. 020
φ 1
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
1. 27B S C
0. 50B S C
8°
8°
10
www.anpec.com.tw
APM9932/C
Physical Specifications
Terminal Material
Lead Solderability
Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb)
Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3.
Reflow Condition
(IR/Convection or VPR Reflow)
temperature
Reference JEDEC Standard J-STD-020A APRIL 1999
Peak temperature
183°C
Pre-heat temperature
Time
Classification Reflow Profiles
Convection or IR/
Convection
Average ramp-up rate(183°C to Peak)
3°C/second max.
120 seconds max
Preheat temperature 125 ± 25°C)
60 – 150 seconds
Temperature maintained above 183°C
Time within 5°C of actual peak temperature 10 –20 seconds
Peak temperature range
220 +5/-0°C or 235 +5/-0°C
Ramp-down rate
6 °C /second max.
6 minutes max.
Time 25°C to peak temperature
VPR
10 °C /second max.
60 seconds
215-219°C or 235 +5/-0°C
10 °C /second max.
Package Reflow Conditions
pkg. thickness ≥ 2.5mm
and all bgas
Convection 220 +5/-0 °C
VPR 215-219 °C
IR/Convection 220 +5/-0 °C
pkg. thickness < 2.5mm and
pkg. volume ≥ 350 mm³
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
11
pkg. thickness < 2.5mm and pkg.
volume < 350mm³
Convection 235 +5/-0 °C
VPR 235 +5/-0 °C
IR/Convection 235 +5/-0 °C
www.anpec.com.tw
APM9932/C
Reliability test program
Test item
SOLDERABILITY
HOLT
PCT
TST
Method
MIL-STD-883D-2003
MIL-STD 883D-1005.7
JESD-22-B, A102
MIL-STD 883D-1011.9
Description
245°C,5 SEC
1000 Hrs Bias @ 125°C
168 Hrs, 100% RH, 121°C
-65°C ~ 150°C, 200 Cycles
Carrier Tape & Reel Dimensions
t
D
P
Po
E
P1
Bo
F
W
Ao
D1
Ko
T2
J
C
A
B
T1
Application
SOP- 8
A
B
330 ± 1
F
5.5± 1
J
T1
T2
W
P
E
62 +1.5
C
12.75+
0.15
2 ± 0.5
12.4 ± 0.2
2 ± 0.2
12± 0. 3
8± 0.1
1.75±0.1
D
D1
Po
P1
Ao
Bo
Ko
t
2.0 ± 0.1
6.4 ± 0.1
5.2± 0. 1
1.55 +0.1 1.55+ 0.25 4.0 ± 0.1
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
12
2.1± 0.1 0.3±0.013
www.anpec.com.tw
APM9932/C
Cover Tape Dimensions
Application
SOP- 8
Carrier Width
12
Cover Tape Width
9.3
Devices Per Reel
2500
Customer Service
Anpec Electronics Corp.
Head Office :
5F, No. 2 Li-Hsin Road, SBIP,
Hsin-Chu, Taiwan, R.O.C.
Tel : 886-3-5642000
Fax : 886-3-5642050
Taipei Branch :
7F, No. 137, Lane 235, Pac Chiao Rd.,
Hsin Tien City, Taipei Hsien, Taiwan, R. O. C.
Tel : 886-2-89191368
Fax : 886-2-89191369
Copyright  ANPEC Electronics Corp.
Rev. A.1 - Oct., 2002
13
www.anpec.com.tw
Similar pages