EGP10AH THRU EGP10MH SINTERED GLASS PASSIVATED JUNCTION HIGH EFFICIENT RECTIFIER Reverse Voltage - 50 to 1000 Volts TTEEDD N N E E T T A PPA Forward Current - 1.0 Ampere DO-204AL FEATURES * Halogen-free type 1.0(25.4) MIN. * GPRC (Glass Passivated Rectifier Chip) inside * Glass passivated cavity-free junction * 0.107(2.70) Compliance to RoHS product * Low forward voltage, high current capability 0.080(2.00) DIA. * Low leakage current * High surge current capability 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * Plastic package has Underwriters Laboratory Flammability 1.0(25.4) MIN. 0.205(5.20) 0.160(4.10) o * High temperature soldering guaranteed: 260 C/10 seconds, Classification 94V-0 0.034(0.86) MECHANICAL DATA 0.028(0.71) DIA. Case : JEDEC DO-204AL molded plastic over glass body Terminals : Tin Plated, solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Weight : 0.012 ounes , 0.3 gram *Dimensions in inches and (millimeters) TM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o EGP10 Ratings at 25 C ambient temperature SYMBOLS unless otherwise specified. UNITS AH BH DH GH JH KH MH 100 200 400 600 800 1000 Volts Maximum repetitive peak reverse voltage VRRM 50 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC blocking voltage Maximum average forward rectified current I (AV) 1.0 Amps IFSM 30 Amps 0.375" (9.5mm) lead length (SEE FIG.1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0 A VF o 1.25 1.7 Volts IR 5 30 50 5 50 - uA Maximum reverse recovery time (NOTE 1) trr 50 75 nS Typical junction capacitance (NOTE 2) CJ Maximum DC reverse current at rated DC blocking voltage TA=25 C o TA=125 C o TA=150 C 1.0 Typical thermal resistance (NOTE 3) Operating junction and storage temperature range R JA TJ,TSTG 15 50 -65 to +175 pF o C/W o C NOTES : (1) Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted. REV. 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES EGP10AH THRU EGP10MH FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.0 0.5 0.375" (9.5mm) LEAD LENGTH 0 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 25 20 15 10 5 0 0 25 50 75 100 125 150 1 175 10 100 AMBIENT TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS o 100 10.00 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES IINSTANTANEOUS FORWARD CURRENT, AMPERES PULSE WIDTH=300uS 1% DUTY CYCLE 1.00 0.10 EGP10JH~EGP10MH EGP10GH EGP10AH~EGP10DH 0.01 10 o TJ = 150 C o TJ = 125 C 1 o TJ = 25 C 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE( C/W) o TJ = 25 C 60 80 100 110 100 100 o JUNCTION CAPACITANCE, pF 40 FIG.6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 200 60 40 20 10 6 4 2 10 1 0.1 1 .1 .2 .4 1.0 2 4 10 REVERSE VOLTAGE, VOLTS REV. 0 20 PERCENT OF RATED PEAK REVERSE VOLTAGE,% 20 40 100 0.01 0.10 1.0 10 100 t , PULSE DURATION, sec Zowie Technology Corporation