SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute LBN08502 SAW Filter Electrical Characteristic Specifications Parameter Unit Minimum Typical Maximum Center Frequency Insertion Loss MHz 85.23 85.38 85.53 dB - 20.8 23 1 dB Bandwidth MHz 9.35 10.01 - 3 dB Bandwidth MHz 10 10.42 - 40 dB Bandwidth MHz - 11.82 12 Ultimate Rejection dB 50 57 - Passband Variation dB - 0.6 1 Absolute Delay usec - 2.1 2.2 128-LN Subatrate Material °C Ambient Temperature 25 DIP2212 Package Size (22.1x12.7x5.2mm3) Typical Performance Type performance -20.6608 -30.6608 Magnitude(dB) -40.6608 -50.6608 -60.6608 -70.6608 -80.6608 -90.6608 -100.6608 73.38 76.38 Package Outline 79.38 82.38 85.38 88.38 Frequency(MHz) 91.38 94.38 97.38 Matching Configuration Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]