19-5200; Rev 2; 8/11 TION KIT EVALUA BLE IL AVA A 36V, Precision, Low-Noise, Wide-Band Amplifier The MAX9632 is a low-noise, precision, wide-band operational amplifier that can operate in a very wide +4.5V to +36V supply voltage range. The IC operates in dual (±18V) mode. The exceptionally fast settling time and low distortion make the IC an excellent solution for precision acquisition systems. The rail-to-rail output swing maximizes the dynamic range when driving high-resolution 24-bit Σ∆ ADCs even with low supply voltages. The IC achieves 55MHz of gain-bandwidth product and ultra-low 0.94nV/√Hz input voltage noise with only 3.9mA of quiescent current. The IC is offered in 8-pin SO and TDFN packages and is rated for operation over the -40NC to +125NC temperature range. Features S 0.94nV/√Hz Ultra-Low Input Voltage Noise S Very Fast 600ns Settling Time to 16-Bit Accuracy S THD of -128dB at 10kHz S Low Input Offset Voltage 125µV (max) S Low Input Offset Temperature Drift 0.5µV/°C (max) S Gain-Bandwidth Product 55MHz S +4.5V to +36V Wide Supply Range S Rail-to-Rail Output S Unity-Gain Stable S 8-Pin SO and TDFN Packages S ESD 8kV HBM and 1kV CDM Ordering Information Applications PINPACKAGE High-Resolution ADC Drivers PART TEMP RANGE High-Resolution DAC Buffers MAX9632ASA+ -40NC to +125NC 8 SO Medical Imaging MAX9632ATA+ -40NC to +125NC 8 TDFN-EP* Low-Noise Signal Processing +Denotes a lead(Pb)-free/RoHS-compliant package. *EP = Exposed pad. Test and Measurement Systems TOP MARK — BML ATE INPUT-VOLTAGE NOISE DENSITY vs. FREQUENCY 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 MAX9632 toc23 1.6 -80 TOTAL HARMONIC DISTORTION (THD) MAX9632 toc12 INPUT-VOLTAGE NOISE DENSITY (nV/√Hz) 1.8 TOTAL HARMONIC DISTORTION vs. OUTPUT VOLTAGE -90 -100 -110 f = 10kHz -120 -130 -140 f = 1kHz -150 -160 10 100 1k FREQUENCY (Hz) 10k 100k 0.1 1 10 OUTPUT VOLTAGE (V) ________________________________________________________________ Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. MAX9632 General Description MAX9632 36V, Precision, Low-Noise, Wide-Band Amplifier ABSOLUTE MAXIMUM RATINGS VCC to VEE.............................................................-0.3V to +40V All Other Pins...................................(VEE - 0.3V) to (VCC + 0.3V) Short-Circuit (GND) Duration, OUT........................................ 10s Continuous Input Current (any pin).................................. Q20mA Continuous Power Dissipation (TA = +70NC) (Note 1) Multilayer SO (derate 7.4mW/NC above +70NC)..........588mW Multilayer TDFN (derate 23.8mW/NC above +70NC)....1905mW ESD Protection HBM............................................................................................... 8kV CDM.................................................................................... 1kV Operating Temperature Range......................... -40NC to +125NC Junction Temperature......................................................+150NC Lead Temperature (soldering, 10s).................................+300NC Soldering Temperature (reflow).......................................+260NC Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. PACKAGE THERMAL CHARACTERISTICS (Note 1) 6 TDFN Junction-to-Ambient Thermal Resistance (qJA)...........42°C/W Junction-to-Case Thermal Resistance (qJC)..................8°C/W 8 SO Junction-to-Ambient Thermal Resistance (qJA).........136°C/W Junction-to-Case Thermal Resistance (qJC)................38°C/W Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a fourlayer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial. ELECTRICAL CHARACTERISTICS (VCC = 15V, VEE = -15V, RL = 10kI to VGND, VIN+ = VIN- = VGND = 0V, VSHDN = VGND, TA = -40NC to +125NC. Typical values are at TA = +25NC, unless otherwise noted.) (Note 2) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS 36 V 6.5 mA POWER SUPPLY Supply Voltage Range VCC Supply Current ICC Power-Supply Rejection Ratio PSRR Guaranteed by PSRR 4.5 TA = +25NC 125 -40NC P TA P +125NC 120 3.9 140 dB SHUTDOWN Shutdown Input Voltage Shutdown Current Device disabled VCC - 0.35 VCC Device enabled VEE VCC - 3.0 VSHDN ISHDN VSHDN = VCC 1 15 TA = +25NC 30 125 V FA DC SPECIFICATIONS Input Offset Voltage Input Offset Voltage Drift VOS 165 -40NC P TA P +125NC (Note 3) FV 0.15 0.5 FV/NC IB 30 180 nA Input Offset Current IOS 15 100 nA Input Common-Mode Range VCM VCC 1.4 V Input Bias Current QDVOS Guaranteed by CMRR VEE + 1.8 2 _______________________________________________________________________________________ 36V, Precision, Low-Noise, Wide-Band Amplifier (VCC = 15V, VEE = -15V, RL = 10kI to VGND, VIN+ = VIN- = VGND = 0V, VSHDN = VGND, TA = -40NC to +125NC. Typical values are at TA = +25NC, unless otherwise noted.) (Note 2) PARAMETER SYMBOL Common-Mode Rejection Ratio CMRR Large-Signal Gain AVOL CONDITIONS MIN TYP VEE + 1.8V P VCM P VCC - 1.4V, TA = +25NC 120 135 VEE + 1.8V P VCM P VCC - 1.4V, -40NC P TA P +125NC 110 VEE + 0.2V P VOUT P VCC - 0.2V, RL = 10kI 125 140 VEE + 0.6V P VOUT P VCC - 0.6V, RL = 600I 120 135 VOH VCC - VOUT VOL VOUT - VEE ISC TA = +25NC Output Voltage Swing Short-Circuit Current MAX UNITS dB dB RL = 10kI 50 150 RL = 600I 150 400 RL = 10kI 50 150 RL = 600I 150 400 mV 56 mA AC SPECIFICATIONS Gain-Bandwidth Product Slew Rate Settling Time Total Harmonic Distortion Input-Voltage Noise Density GBWP 55 MHz SR 0 P VOUT P 5V 30 V/Fs tS To 0.0015%, VOUT = 10VP-P, CL = 100pF, AV = 1V/V 600 ns f = 1kHz, VOUT = 3VRMS, RL = 600I, AV = 1V/V -136 f = 10kHz, VOUT = 3VRMS, RL = 600I, AV = 1V/V -128 f = 1kHz 0.94 THD eN Input Voltage Noise 0.1Hz P f P 10Hz dB 65 Input-Current Noise Density iN f = 1kHz 3.75 Capacitive Loading CL No sustained oscillation, AV = 1V/V 350 nV/√Hz nVP-P pA/√Hz pF Note 2: All devices are 100% production tested at TA = +25NC. Temperature limits are guaranteed by design. Note 3: Guaranteed by design. _______________________________________________________________________________________ 3 MAX9632 ELECTRICAL CHARACTERISTICS (continued) Typical Operating Characteristics (VCC = 15V, VEE = -15V, RL = 10kI to VGND, VIN+ = VIN- = VGND = 0V, VSHDN = VGND, TA = -40NC to +125NC. Typical values are at TA = +25NC, unless otherwise noted.) 20 15 15 10 10 MAX9632 toc03 4.6 4.4 4.2 4.0 3.8 3.6 3.4 5 5 3.2 0 10 20 30 40 50 60 0 10 15 20 25 30 35 SUPPLY VOLTAGE (V) SUPPLY CURRENT vs. TEMPERATURE INPUT OFFSET VOLTAGE vs. COMMON-MODE VOLTAGE INPUT BIAS CURRENT vs. INPUT COMMON-MODE VOLTAGE 4.2 4.0 3.8 3.6 3.4 -46 -54 -58 75 100 TA = +85°C -52 3.0 50 TA = 0°C -50 -56 25 TA = +25°C -48 125 TA = +125°C -10 -20 TA = +85°C -30 -50 TA = 0°C TA = -40°C -70 -15 -10 -5 0 5 10 TA = +25°C -40 -60 TA = +125°C 15 -15 -10 -5 0 5 10 TEMPERATURE (°C) COMMON-MODE VOLTAGE (V) COMMON-MODE VOLTAGE (V) COMMON-MODE REJECTION RATIO vs. FREQUENCY POWER-SUPPLY REJECTION RATIO vs. FREQUENCY OUTPUT VOLTAGE HIGH vs. OUTPUT CURRENT (SOURCE) -40 -60 -80 -100 -120 -140 -160 -20 -40 -60 -80 -100 -120 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) 15.0 14.9 TA = +25°C 14.8 TA = 0°C TA = +125°C 14.7 TA = +85°C 14.6 14.5 -140 TA = -40°C 14.4 -160 10 15.1 15 MAX9632 toc09 0 OUTPUT VOLTAGE HIGH (V) -20 20 MAX9632 toc08 0 POWER-SUPPLY REJECTION RATIO (dB) MAX9632 toc07 20 40 MAX9632 toc06 -44 3.2 0 TA = -40°C -42 0 INPUT BIAS CURRENT (nA) 4.4 -40 MAX9632 toc05 MAX9632 toc04 4.6 1 5 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT (nV/°C) 4.8 -25 0 20 40 60 80 100 120 140 160 180 200 INPUT OFFSET VOLTAGE (µV) 5.0 -50 3.0 0 INPUT OFFSET VOLTAGE (µV) 0 SUPPLY CURRENT (mA) 4.8 SUPPLY CURRENT (mA) 20 OCCURANCE (%) 25 5.0 MAX9632 toc02 30 OCCURANCE (%) 25 MAX9632 toc01 35 SUPPLY CURRENT vs. SUPPLY VOLTAGE INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT HISTOGRAM INPUT OFFSET VOLTAGE HISTOGRAM COMMON-MODE REJECTION RATIO (dB) MAX9632 36V, Precision, Low-Noise, Wide-Band Amplifier 1 10 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) 0 10 20 30 40 50 OUTPUT SOURCE CURRENT (mA) 4 _______________________________________________________________________________________ 60 36V, Precision, Low-Noise, Wide-Band Amplifier OUTPUT VOLTAGE LOW vs. OUTPUT CURRENT (SINK) TA = 0°C -14.85 TA = -40°C -14.90 100 80 60 40 20 -14.95 0 -15.00 -20 10 20 30 40 50 10 100 1k FREQUENCY (Hz) 0.1Hz TO 10Hz NOISE vs. TIME INPUT-CURRENT NOISE DENSITY vs. FREQUENCY 1.2 1.0 0.8 0.6 0.4 0.2 10 100 1k 100k 10k FREQUENCY (Hz) OUTPUT IMPEDANCE vs. FREQUENCY 25 70 20 60 OUTPUT IMPEDANCE (I) INPUT CURRENT NOISE DENSITY (pA/√Hz) 20nV/div 1.4 10k 100k 1M 10M 100M OUTPUT SINK CURRENT (mA) MAX9632 toc13 1.6 0 1 60 MAX9632 toc14 0 MAX9632 toc12 120 15 10 MAX9632 toc15 TA = +125°C -14.80 140 1.8 INPUT-VOLTAGE NOISE DENSITY (nV/√Hz) TA = +85°C -14.75 MAX9632 toc11 TA = +25°C OPEN-LOOP GAIN (dB) 50 40 30 20 5 10 0 10 10s/div 100 1k 10k 0 100k 10 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) FREQUENCY (Hz) INPUT SMALL-SIGNAL STEP RESPONSE INPUT LARGE-SIGNAL STEP RESPONSE STABILITY vs. CAPACITIVE AND RESISTIVE LOAD PARALLEL MAX9632 toc16 MAX9632 toc17 1000 900 INPUT 2V/div 800 RESISTIVE LOAD (I) INPUT 100mV/div OUTPUT 500mV/div OUTPUT 50mV/div MAX9632 toc18 OUTPUT VOLTAGE LOW (V) -14.60 -14.70 160 MAX9632 toc10 -14.55 -14.65 INPUT-VOLTAGE NOISE DENSITY vs. FREQUENCY OPEN-LOOP GAIN vs. FREQUENCY 700 600 500 400 300 UNSTABLE 200 STABLE 100 0 200ns/div 1µs/div 0 200 400 600 800 1000 1200 CAPACITIVE LOAD (pF) _______________________________________________________________________________________ 5 MAX9632 Typical Operating Characteristics (continued) (VCC = 15V, VEE = -15V, RL = 10kI to VGND, VIN+ = VIN- = VGND = 0V, VSHDN = VGND, TA = -40NC to +125NC. Typical values are at TA = +25NC, unless otherwise noted.) Typical Operating Characteristics (continued) (VCC = 15V, VEE = -15V, RL = 10kI to VGND, VIN+ = VIN- = VGND = 0V, VSHDN = VGND, TA = -40NC to +125NC. Typical values are at TA = +25NC, unless otherwise noted.) ISOLATION RESISTANCE vs. CAPACITIVE STABILITY POWER-UP TIME VCC = 5V, VEE = -5V MAX9632 toc19 10 9 ISOLATION RESISTANCE (I) 8 MAX9632 toc20 VCC 10V/div GND 7 6 5 4 3 OUTPUT 500mV/div STABLE UNSTABLE 2 GND 1 0 0 100 200 300 400 500 600 700 800 900 1000 1µs/div CAPACITIVE LOAD (pF) RECOVERY FROM SHUTDOWN VCC = 5V, VEE = -5V TOTAL HARMONIC DISTORTION vs. FREQUENCY MAX9632 toc21 TOTAL HARMONIC DISTORTION (dB) GND OUTPUT 500mV/div GND MAX9632 toc22 -100 SHDN 5V/div -110 -120 -130 -140 -150 -160 1µs/div 10 100 1k 10k FREQUENCY (Hz) TOTAL HARMONIC DISTORTION vs. OUTPUT VOLTAGE MAX9632 toc23 -80 TOTAL HARMONIC DISTORTION (THD) MAX9632 36V, Precision, Low-Noise, Wide-Band Amplifier -90 -100 -110 f = 10kHz -120 -130 -140 f = 1kHz -150 -160 0.1 1 10 OUTPUT VOLTAGE (V) 6 _______________________________________________________________________________________ 100k 36V, Precision, Low-Noise, Wide-Band Amplifier TOP VIEW NOT TO SCALE + N.C. 1 VCC IN- 2 6 OUT IN+ 3 5 N.C. VEE 4 N.C. 1 8 SHDN IN- 2 7 IN+ 3 VEE 4 MAX9632 + SO MAX9632 EP 8 SHDN 7 VCC 6 OUT 5 N.C. TDFN Pin Description PIN NAME 1, 5 N.C. Not Connected FUNCTION 2 IN- Negative Input 3 IN+ Positive Input 4 VEE Negative Supply Voltage 6 OUT Output 7 VCC Positive Supply Voltage 8 SHDN Active-High Shutdown — EP Exposed Pad (TDFN Only). Connect to a large VEE plane to maximize thermal performance. Not intended as an electrical connection point. _______________________________________________________________________________________ 7 MAX9632 Pin Configuration MAX9632 36V, Precision, Low-Noise, Wide-Band Amplifier Detailed Description The MAX9632 is designed in a new 36V, high-speed complementary BiCMOS process that is optimized for excellent AC dynamic performance combined with highvoltage operation. The IC offers precision, high-bandwidth, ultra-low noise and exceptional distortion performance. The IC is unity-gain stable and operates either with single-supply voltage up to 36V or with dual supplies up to Q18V. Applications Information Operating Supply Voltage The IC can operate with dual supplies from Q2.25V to Q18V or with a single supply from +4.5V to +36V with respect to ground. Even though the IC supports highvoltage operation with excellent performance, the device can also operate in very popular applications at 5V. Low Noise and Low Distortion The IC is designed for extremely low-noise applications such as professional audio equipment, very high performance instrumentations, automated test equipment, and medical imaging. The low noise, combined with fast settling time, makes it ideal to drive high-resolution sigmadelta or SARs analog-to-digital converters. The IC is also designed for ultra-low-distortion performance. THD specifications in the Electrical Characteristics table and Typical Operating Characteristics are calculated up to the fifth harmonic. Even when driving highvoltage swing up to 10VP-P, the IC maintains excellent low distortion operation over and above 100kHz of bandwidth. Rail-to-Rail Output Stage The output stage swings to within 50mV (typ) of either power-supply rail with a 10kI load and provides a 55MHz GBW with a 30V/s slew rate. The device is unity-gain stable and can drive a 100pF capacitive load without compromising stability. Stability with higher capacitive loads can be improved by adding an isolation resistor in series with the op-amp output. This resistor improves the circuit’s phase margin by isolating the load capacitor from the amplifier’s output. The Typical Operating Characteristics show a profile of the isolation resistor and capacitive load values that maintain the device into the stable region. Figure 1. Input Protection Circuit Input Differential Voltage Protection During normal op-amp operation, the inverting and noninverting inputs of the IC are at essentially the same voltage. However, either due to fast input voltage transients or other fault conditions, these inputs can be forced to be at two different voltages. Internal back-to-back diodes protect the inputs from an excessive differential voltage (Figure 1). Therefore, IN+ and IN- can be any voltage within the range shown in the Absolute Maximum Ratings section. Note the protection time is still dependent on the package thermal limits. If the input signal is fast enough to create the internal diodes’ forward bias condition, the input signal current must be limited to 20mA or less. If the input signal current is not inherently limited, an input series resistor can be used to limit the signal input current. Care should be taken in choosing the input series resistor value, since it degrades the low-noise performance of the device. Shutdown The shutdown is referenced to the positive supply. See the Electrical Characteristics table for the proper levels of functionality. A high level (above VCC - 0.35V) disables the op amp and puts the output into a high-impedance state. A low level (below VCC - 3V) enables the device. As an example, if the op amp is powered with dual supplies of Q15V, the device is enabled when shutdown is at or below 12V. The device is disabled when shutdown is at or above 14.65V. If the op amp is powered with a single supply of 36V, the device is enabled when shutdown is at or below 33V. The device is disabled when shutdown is at or above 35.65V. This input must be connected to a valid high or low voltage and should not be left disconnected. Power Supplies and Layout The MAX9632 can operate with dual supplies from Q2.25V to Q18V or with a single supply from +4.5V to +36V with respect to ground. When used with dual supplies, bypass both VCC and VEE with their own 0.1FF capacitor to ground. When used with a single supply, bypass VCC with a 0.1FF capacitor to ground. 8 _______________________________________________________________________________________ 36V, Precision, Low-Noise, Wide-Band Amplifier For high-frequency designs, ground vias are critical to provide a ground return path for high-frequency signals and should be placed near the decoupling capacitors. Signal routing should be short and direct to avoid parasitic effects. Avoid using right angle connectors since they may introduce a capacitive discontinuity and ultimately limit the frequency response. Electrostatic Discharge (ESD) The IC has built-in circuits to protect it from ESD events. An ESD event produces a short, high-voltage pulse that is transformed into a short current pulse once it discharges through the device. The built-in protection circuit provides a current path around the op amp that prevents it from being damaged. The energy absorbed by the protection circuit is dissipated as heat. ESD protection is guaranteed up to Q8kV with the Human Body Model (HBM). The Human Body Model simulates the ESD phenomenon wherein a charged body directly transfers its accumulated electrostatic charge to the ESD-sensitive device. A common example of this phenomenon is when a person accumulates static charge by walking across a carpet and then transfers all of the charge to an ESD-sensitive device by touching it. Not all ESD events involve the transfer of charge into the device. ESD from a charged device to another body is also a common form of ESD. If a charged device comes into contact with another conductive body that is at a lower potential, it discharges into that body. Such an ESD event is known as Charged Device Model (CDM) ESD, which can be even more destructive than HBM ESD (despite its shorter pulse duration) because of its high current. The IC guarantees CDM ESD protection up to Q1kV. Driving High-Resolution Sigma-Delta ADCs The MAX9632’s excellent AC specifications and 55MHz bandwidth are a good fit for driving high-speed, precision delta-sigma ADCs. These ADCs require an ultra-low noise op amp to achieve signal-to-noise ratios (SNR) better than 100dB. The MAX11040 is a 24-bit, 4-channel, simultaneous-sampling ADC with 117dB SNR at 1ksps and 106dB at 16ksps. The MAX11040 measures analog inputs up to Q2.2V. Sampling up to 64ksps, the MAX11040 achieves better than -94dB THD and 94dB SFDR. The MAX11040 measures four differential inputs simultaneously, outputting the data through an SPI™ interface to allow daisy-chaining the data outputs and inputs together. Therefore, up to eight MAX11040 devices can be placed in parallel to measure up to 32 inputs simultaneously. This is ideal for 3-phase power monitoring that requires multiple current and voltage readings and very wide dynamic range. The Typical Application Circuit shows an example of the MAX9632 driving the MAX11040. Chip Information PROCESS: BiCMOS SPI is a trademark of Mototrola, Inc. _______________________________________________________________________________________ 9 MAX9632 Careful layout technique helps optimize performance by decreasing the amount of stray capacitance at the op amp’s inputs and outputs. To decrease stray capacitance, minimize trace lengths by placing external components close to the op amp’s pins. MAX9632 36V, Precision, Low-Noise, Wide-Band Amplifier Typical Application Circuit 22µF +15V 1kI IN+ 180I 4.7kI 10kI MAX9632 -15V 1nF 1µF 4.7kI MAX11040 ADC -15V 10kI 180I MAX9632 IN22µF 1kI +15V 10 ������������������������������������������������������������������������������������� 36V, Precision, Low-Noise, Wide-Band Amplifier PACKAGE TYPE PACKAGE CODE OUTLINE NO. LAND PATTERN NO. 8 SO S8+2 21-0041 90-0096 8 TDFN-EP T833+3 21-0137 90-0060 ______________________________________________________________________________________ 11 MAX9632 Package Information For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. MAX9632 36V, Precision, Low-Noise, Wide-Band Amplifier Package Information (continued) For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. COMMON DIMENSIONS PACKAGE VARIATIONS MIN. MAX. PKG. CODE N D2 E2 e JEDEC SPEC b A 0.70 0.80 T633-2 6 1.50±0.10 2.30±0.10 0.95 BSC MO229 / WEEA 0.40±0.05 1.90 REF D 2.90 3.10 T833-2 8 1.50±0.10 2.30±0.10 0.65 BSC MO229 / WEEC 0.30±0.05 1.95 REF E 2.90 3.10 T833-3 8 1.50±0.10 2.30±0.10 0.65 BSC MO229 / WEEC 0.30±0.05 1.95 REF A1 0.00 0.05 T1033-1 10 1.50±0.10 2.30±0.10 0.50 BSC MO229 / WEED-3 0.25±0.05 2.00 REF L 0.20 0.40 T1033MK-1 10 1.50±0.10 2.30±0.10 0.50 BSC MO229 / WEED-3 0.25±0.05 2.00 REF 10 1.50±0.10 2.30±0.10 0.50 BSC MO229 / WEED-3 0.25±0.05 2.00 REF 2.40 REF SYMBOL k 0.25 MIN. T1033-2 A2 0.20 REF. T1433-1 14 1.70±0.10 2.30±0.10 0.40 BSC ---- 0.20±0.05 T1433-2 14 1.70±0.10 2.30±0.10 0.40 BSC ---- 0.20±0.05 12 ������������������������������������������������������������������������������������� T1433-3F 14 1.70±0.10 2.30±0.10 0.40 BSC ---0.20±0.05 [(N/2)-1] x e 2.40 REF 2.40 REF 36V, Precision, Low-Noise, Wide-Band Amplifier COMMON DIMENSIONS SYMBOL A MIN. 0.70 PACKAGE VARIATIONS MAX. PKG. CODE N D2 E2 e JEDEC SPEC b 0.80 T633-2 6 1.50±0.10 2.30±0.10 0.95 BSC MO229 / WEEA 0.40±0.05 1.90 REF 8 1.50±0.10 2.30±0.10 0.65 BSC MO229 / WEEC 0.30±0.05 1.95 REF 8 1.50±0.10 2.30±0.10 0.65 BSC MO229 / WEEC 0.30±0.05 1.95 REF 2.00 REF D 2.90 3.10 T833-2 E 2.90 3.10 T833-3 [(N/2)-1] x e A1 0.00 0.05 T1033-1 10 1.50±0.10 2.30±0.10 0.50 BSC MO229 / WEED-3 0.25±0.05 L 0.20 0.40 T1033MK-1 10 1.50±0.10 2.30±0.10 0.50 BSC MO229 / WEED-3 0.25±0.05 2.00 REF 10 1.50±0.10 2.30±0.10 0.50 BSC MO229 / WEED-3 0.25±0.05 2.00 REF k 0.25 MIN. T1033-2 A2 0.20 REF. T1433-1 14 1.70±0.10 2.30±0.10 0.40 BSC ---- 0.20±0.05 2.40 REF T1433-2 14 1.70±0.10 2.30±0.10 0.40 BSC ---- 0.20±0.05 2.40 REF T1433-3F 14 1.70±0.10 2.30±0.10 0.40 BSC ---- 0.20±0.05 2.40 REF ______________________________________________________________________________________ 13 MAX9632 Package Information (continued) For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. 36V, Precision, Low-Noise, Wide-Band Amplifier MAX9632 Revision History REVISION NUMBER REVISION DATE 0 10/10 Initial release — 1 4/11 Updated short-circuit current spec 3 2 8/11 Updated TDFN land pattern number 11 DESCRIPTION PAGES CHANGED Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 14 © Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 2011 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.