DOMINANT Semiconductors Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM AlInGaP : DWx TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > High brightness surface mount LED using thin film technology. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to both IR reflow soldering and TTW soldering. Environmental friendly; RoHS compliance. Applications: > > > > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL), Display: full color display video notice board. Industry: white goods (eg: Oven, microwave, etc.). Lighting: architecture lighting, general lighting, garden light, etc © 2005 DomiLED is a trademark of DOMINANT Semiconductors. All rights reserved. Product specifications are subject to change without notice. 1 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination Part Ordering Number DWS-SJS-ST2-1 • DWS-SJS-S1 Chip Technology / Color AS AlIGaP Viewing Angle˚ 120 Total Flux @ IF=50mA, mlm (typ) 750 Super Red, 632nm Luminous Intensity @ IF = 50mA IV (mcd) 180.0 - 450.0 180.0 - 224.0 • DWS-SJS-S2 224.0 - 285.0 • DWS-SJS-T1 285.0 - 355.0 • DWS-SJS-T2 355.0 - 450.0 DWR-SJS-TU2-1 AS AlIGaP • DWR-SJS-T1 Red, 625nm 120 900 285.0 - 715.0 285.0 - 355.0 • DWR-SJS-T2 355.0 - 450.0 • DWR-SJS-U1 450.0 - 560.0 • DWR-SJS-U2 560.0 - 715.0 DWR-TJS-UV2-1 • DWR-TJS-U1 TS AlIGaP 120 2000 Red, 625nm 450.0 - 1125.0 450.0 - 560.0 • DWR-TJS-U2 560.0 - 715.0 • DWR-TJS-V1 715.0 - 900.0 • DWR-TJS-V2 900.0 - 1125.0 DWR-TJS-VW2-1 • DWR-TJS-V1 TS AlIGaP 120 3200 Red, 625nm 715.0 - 1800.0 715.0 - 900.0 • DWR-TJS-V2 900.0 - 1125.0 • DWR-TJS-W1 1125.0 - 1400.0 • DWR-TJS-W2 1400.0 - 1800.0 DWA-SJS-UV2-1 • DWA-SJS-U1 AS AlIGaP 120 1400 Amber, 615nm 450.0 - 1125.0 450.0 - 560.0 • DWA-SJS-U2 560.0 - 715.0 • DWA-SJS-V1 715.0 - 900.0 • DWA-SJS-V2 900.0 - 1125.0 DWO-SJS-UV2-1 • DWO-SJS-U1 AS AlIGaP 120 1400 Orange, 605nm 450.0 - 1125.0 450.0 - 560.0 • DWO-SJS-U2 560.0 - 715.0 • DWO-SJS-V1 715.0 - 900.0 • DWO-SJS-V2 900.0 - 1125.0 DWY-SJS-UV1-1 • DWY-SJS-U1 AS AlIGaP 120 1000 Yellow, 587nm 450.0 - 900.0 450.0 - 560.0 • DWY-SJS-U2 560.0 - 715.0 • DWY-SJS-V1 715.0 - 900.0 DWY-TJS-UV2-1 • DWY-TJS-U1 TS AlIGaP 120 1600 Yellow, 587nm 450.0 - 1125.0 450.0 - 560.0 • DWY-TJS-U2 560.0 - 715.0 • DWY-TJS-V1 715.0 - 900.0 • DWY-TJS-V2 900.0 - 1125.0 2 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination Part Ordering Number Chip Technology / Color AS AlIGaP DWP-SJS-PQ1-1 • DWP-SJS-P1 Viewing Angle˚ 120 Total Flux @ IF=50mA, mlm (typ) 150 Pure Green, 560nm Luminous Intensity @ IF = 50mA IV (mcd) 45.0 - 90.0 45.0 - 56.0 • DWP-SJS-P2 56.0 - 71.5 • DWP-SJS-Q1 71.5 - 90.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Other luminous intensity groups may also be available upon request. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. An optional Vf bining is also available upon request. Bining scheme is as per following table. Wavelength Grouping Color Group Wavelength distribution (nm) DWS; Super Red Full 625 - 640 DWR-SJ; Red Full 620 - 630 DWR-TJ; Red (TS) Full 620 - 635 DWA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 600 - 612 W 600 - 603 X 603 - 606 Y 606 - 609 Z 609 - 612 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 DWO; Orange DWY; Yellow DWP; Pure Green Full 552.5 - 564.5 W 552.5 - 555.5 X 555.5 - 558.5 Y 558.5 - 561.5 Z 561.5 - 564.5 Dominant wavelength is measured with an accuracy of ± 1 nm. 3 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination Electrical Characteristics at Ta=25˚C Vf @ If = 50mA Part Number Vr @ Ir = 10uA Typ. (V) Max. (V) DWS-SJS, DWR-SJS, DWA-SJS, DWO-SJS, DWY-SJS, DWP-SJS 2.1 2.6 12 DWR-TJS, DWY-TJS 2.6 3.2 12 Min. (V) Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Vf Bining (Optional) Vf @ If = 50mA Forward Voltage (V) 50 1.7 ... 2.0 51 2.0 ... 2.3 52 2.3 ... 2.6 53 2.6 ... 2.9 54 2.9 ... 3.2 Forward voltage, Vf is measured with an accuracy of ± 0.1V. Please consult sales and marketing for special part number to incorporate Vf binning. Absolute Maximum Ratings Maximum Value Unit DC forward current 70 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA Reverse voltage 12 V ESD Thereshold (HBM) 2 kV 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 225 mW LED junction temperature Power dissipation (at room temperature) 4 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination Forward Current Vs Forward Voltage 1.4 70 1.2 60 Forward Current, mA Relative Intensity Relative Intensity Vs Forward Current 1 0.8 0.6 0.4 AS AllnGaP 40 30 20 TS AllnGaP 10 0.2 0 0 0 20 40 60 80 1.5 2 3 Forward Voltage, V Maximum Current Vs Ambient Temperature Relative Intensity Vs Wavelength 80 1 70 0.9 Yellow 0.8 60 50 40 30 20 0.7 0.6 0.5 0.2 0.1 0 20 30 40 50 60 70 80 Pure Green 0.3 0 10 Amber 0.4 10 0 90 100 500 550 600 650 700 750 Wavelength, nm Ambient Temperature Radiation Pattern Relative Intensity vs Wavelength 30° 1 20° 10° 0° 1.0 0.9 Red 0.8 Relative Intensity 2.5 Forward Current, mA Relative Intensity Forward Current, mA 50 0.7 40° Super Red Orange 0.6 0.8 50° 0.6 60° 0.4 0.5 0.4 0.3 70° 0.2 0.1 0.2 80° 0 500 550 600 650 700 90° 750 0 Wavelength, nm 5 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination DomiLED • AllnGap : DWx Package Outlines TM 6 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination Recommended Solder Pad 7 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 8 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination Packaging Specification 9 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT Semiconductors ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : qty S/N : xxx D/C: xxxx GROUP : group Reel Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM Semiconductors For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 55 reels MAX 110,000 MAX 10 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination Recommended Sn-Pb IR-Reflow Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 275 235-240˚C 10-30s 250 225 Ramp-up 3˚C/sec max. Temperature (˚C) 200 175 183˚C 150 60-150s 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-120s 50 360s max 25 0 50 100 150 200 Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination Revision History Page Subjects Date of Modification - New Format 29 Sept 2005 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without prior notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Semiconductors. 12 29/09/2005 V8.0 DOMINANT TM AlInGaP : DWx Semiconductors Innovating Illumination About Us DOMINANT Semiconductors is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Semiconductors can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Head Quarter DOMINANT Semiconductors Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT China Sales Office DOMINANT Semiconductors (Shenzhen) Co. Ltd. 24BC Newbaohui Building, No. 1007 West Nanhai Blvd., Nanshan, Shenzhen, China P.C. 518054 Tel: +86 (755) 86031785 / +86 (755) 86031786 Fax: +86 (755) 86031789 E-mail: [email protected] DOMINANT Korea Sales Office DOMINANT Semiconductors Korea Inc. 902 Sunil Technopia, 440 Sangdaewon-dong, Jungwon-gu, Sungnam-si, Kyunggi-do, Korea 462726 Tel: 82-31-777-3978 Fax: 82-31-777-3976 E-mail: [email protected] DOMINANT Semiconductors Innovating Illumination TM