AZ692/AZ693 10 AMP MINIATURE POWER RELAY FEATURES • • • • • • • Isolation spacing greater than 8 mm Dielectric strength 4000 Vrms coil to contact Approvals/Standards include UL, VDE, IEC Single pole — Forms A, B, C available 10 Amp switching Life expectancy to 30 million operations Epoxy sealed version for automatic wave soldering and cleaning • UL, CUR file E44211; VDE 4120–4940–4002/A1 CONTACTS Arrangement SPDT (1 Form C) SPST (1 Form A and 1 Form B) Ratings Resistive load: Max. switched power: 300 W or 2500 VA Max. switched current: 10 A; 64 A for 2 ms Max. switched voltage: 150* VDC or 380 VAC UL Rating 10 A at 24 VDC or 115 VAC 1/4 HP 120 VAC motor load 10 A at 250 VAC B 300 pilot duty GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 30 million operations 1 x 105 at 10 A, 30 VDC or 115 VAC 2 x 105 at 8 A, 250 VAC Operate Time (typical) 6 ms at nominal coil voltage Release Time (typical) 2 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance 10,000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage Standard: -55°C (-67°F) to 70°C (158°F) Sensitive: -55°C (-67°F) to 80°C (176°F) Both: -55°C (-67°F) to 110°C (230°F) Storage * If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Material Silver cadmium oxide Resistance < 30 milliohms initially (at rated current, voltage drop method) COIL Power At Pickup Voltage (typical) Standard coil: 337 mW Sensitive coil: 234 mW Max. Continuous Dissipation 1.9 W at 20°C (68°F) ambient 1.4 W at 40°C (104°F) ambient Temperature Rise Standard: 40°C (72°F) at nominal coil voltage Sensitive: 26°C (47°F) at nominal coil voltage Vibration 0.062" DA at 10–55 Hz Shock 20 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 17 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. Temperature Max. 110°C (230°F) 4. Specifications subject to change without notice. 7/24/02W AZ692/AZ693 INTERNATIONAL APPROVALS Passed International Electrical Code IEC 380 Germany VDE VDE VDE VDE VDE 0860/8.81 paragraphs 10, 14 0806/8.81 paragraphs 7, 11, 15, 16, 29 0631/9.77 paragraphs 9, 12, 14 0730/T.1/3.72 paragraph 22 0435/9.72 (with production monitoring) U.S.A. UL File E44211 RELAY ORDERING DATA: Single Pole .138 Spacing STANDARD RELAYS: 1 Form C (SPDT) COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8 ORDER NUMBER* Coil Resistance ± 10% 38 Must Operate VDC 3.5 Unsealed AZ692–125–2 Sealed AZ2692–125–2 6 10 58 4.2 AZ692–112–2 AZ2692–112–2 12 19 215 8.4 AZ692–08–2 AZ2692–08–2 24 35 740 16.8 AZ692–560–2 AZ2692–560–2 48 74 3,200 33.6 AZ692–04–2 AZ2692–04–2 SENSITIVE RELAYS: 1 Form C (SPDT) COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8 ORDER NUMBER* Coil Resistance ± 10% 47 Must Operate VDC 3.5 Unsealed AZ692–118–52 Sealed AZ2692–118–52 6 10 80 4.2 AZ692–010–52 AZ2692–010–52 12 21 330 8.4 AZ692–071–52 AZ2692–071–52 24 41 1,200 16.8 AZ692–052–52 AZ2692–052–52 48 80 4,700 33.6 AZ692–518–52 AZ2692–518–52 *Substitute “4 or 54,” “6 or 56” in place of “2 or 52” to indicate 1 Form A and 1 Form B respectively. HARDWARE ORDERING DATA — AZ692† DESCRIPTION ORDER NUMBER DESCRIPTION ORDER NUMBER Socket ST482–U1 Retainer ST482–2 † See following pages for diagram MECHANICAL DATA .040 (1.0) .476 max. (12.1) max. AZ692 PC BOARD LAYOUT Viewed toward terminals .008 (0.2) 1.11 max. (28.2) max. I FORM C (SPDT) .138 (3.5) 1.03 max. (26.1) max. .024 DIA (0.6) .154 (3.9) *SEALED VERSION STAND OFF .025 (0.6) I FORM B (SPDT - NC) 5 .016 (0.4) * WIRING DIAGRAM 4 4 .051 DIA (1.3) 5 HOLES .654 (16.6) .138 (3.5) .300 (7.6) .100 (2.5) 5 4 3 3 1 I FORM A (SPDT - NO) 2 1 2 1 2 Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 7/24/02W AZ692/AZ693 RELAY ORDERING DATA: Single Pole .100 Spacing STANDARD RELAYS: 1 Form C (SPDT) COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC 5 Max. Continuous VDC 8 Coil Resistance ± 10% 38 Must Operate VDC 3.5 Unsealed AZ693–125–2 Sealed AZ2693–125–2 6 10 58 4.2 AZ693–112–2 AZ2693–112–2 12 19 215 8.4 AZ693–08–2 AZ2693–08–2 24 35 740 16.8 AZ693–560–2 AZ2693–560–2 48 74 3,200 33.6 AZ693–04–2 AZ2693–04–2 SENSITIVE RELAYS: 1 Form C (SPDT) COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8 ORDER NUMBER* Coil Resistance ± 10% 47 Must Operate VDC 3.5 Unsealed AZ693–118–52 Sealed AZ2693–118–52 6 10 80 4.2 AZ693–010–52 AZ2693–010–52 12 21 330 8.4 AZ693–071–52 AZ2693–071–52 24 41 1,200 16.8 AZ693–052–52 AZ2693–052–52 48 80 4,700 33.6 AZ693–518–52 AZ2693–518–52 *Substitute “4 or 54,” “6 or 56” in place of “2 or 52” to indicate 1 Form A and 1 Form B respectively. HARDWARE ORDERING DATA — AZ693† DESCRIPTION ORDER NUMBER DESCRIPTION ORDER NUMBER Socket ST483–U1 Retainer ST482–2 † See following pages for diagram MECHANICAL DATA MAXIMUM SWITCHING CAPACITY AZ693 PC BOARD LAYOUT .040 (1.0) .476 max. (12.1) max. 10.0 9.0 8.0 7.0 6.0 5.0 Viewed toward terminals .100 (2.5) .008 (0.2) DC Resistive Load 4.0 3.0 .016 (0.4) .700 (17.8) .051 DIA (1.3) 5 HOLES * .024 DIA (0.6) .154 (3.9) .100 (2.5) .300 (7.6) 4 2 5 1 2 1 1000 400 500 600 700 800 900 300 200 50 60 70 80 90 40 100 3 4 .1 30 .2 I FORM A (SPDT - NO) 5 1 AZ693 20 I FORM B (SPDT - NC) 3 .9 .8 .7 .6 .5 .3 WIRING DIAGRAM 4 AZ692 1.0 .4 *SEALED VERSION STAND OFF .025 (0.6) I FORM C (SPDT) AC Resistive Load 2.0 10 1.03 max. (26.1) max. .100 (2.5) Current 1.11 max. (28.2) max. Voltage 2 Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 7/24/02W AZ692/AZ693 Coil Temperature Rise Sensitive Coil Temperature Rise ˚C Coil Temperature Rise ˚C Standard 200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 10A 0A 60% 80% 100% 120% 140% 160% 180% 200% 220% 200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 10A 0A 60% 80% % of Nominal Coil Voltage (@20˚C) 100% 120% 140% 160% 180% 200% 220% % of Nominal Coil Voltage (@20˚C) HARDWARE SPECIFICATIONS ST482-U1 (For use with AZ692 and AZ2692 only) .354 (9.0) .500 (12.7) 1.22 (30.9) ST483-U1 (For use with AZ693 and AZ2693 only) 1.22 (30.9) 1.28 (32.5) .366 (9.3) .414 (10.5) 1.217 (30.9) .177 MAX. (4.5) 1.28 (32.5) .366 (9.3) .414 (10.5) .125 DIA (3.2) .295 (7.5) .354 (9.0) .500 (12.7) .177 MAX. (4.5) .125 DIA (3.2) .295 (7.5) .158 (4.0) 1.217 (30.9) .158 (4.0) .197 (5.0) .276 (7.0) 1.004 (26.5) .792 (20.1) 1.004 (26.5) .792 (20.1) .059 DIA (1.5) .059 DIA (1.5) .118 (3.0) RETAINING CLIP .138 (3.5) .118 (3.0) RETAINING CLIP .138 (3.5) Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 7/24/02W