FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Features Package Product features Super Wide Angle Type (h=1.3 mm), Water Clear resin ・Outer Dimension 2.5 x 2.0 x 1.3mm ( L x W x H ) ・Temperature range Storage Temperature : -40℃～120℃ Operating Temperature : -40℃～100℃ ・Lead–free soldering compatible ・RoHS compliant Dominant wavelength Red Half Intensity Angle FR Die materials FR : AlGaInP Rank grouping parameter Sorted by luminous intensity and wavelength per rank taping Assembly method Auto pick & place machine (Auto Mounter) Soldering methods Reflow soldering and manual soldering Taping and reel 2,500pcs per reel in a 8mm width tape. (Standard) Reel diameter:φ180mm ESD : 626nm(FR) : 140 deg. AlGaInP : More than 2kV(HBM) Recommended Applications Amusement Equipment, Electric Household Appliances, OA/FA, Other General Applications 2007.8.31 Page 1 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Color and Luminous Intensity Part No. FR1106W 2006.11.13 Material AlGaｌnP Emitted Color Red (Ta=25℃) Lens Color Water C le ar Dominant Wavelength Luminous Intensity λd (nm) Iv (mcd) TYP. IF MIN. TYP. IF 626 20 33 70 20 Page 2 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Absolute Maximum Ratings (Ta=25℃) Item Symbol Absolute Maximum Ratings Unit Power Dissipation Pd 78 mW Forward Current IF 30 mA IFRM 100 mA ⊿IF 1.00 mA/℃ ⊿IFRM 3.33 mA/℃ Reverse Voltage VR 5 V Operating Temperature T opr -40～+100 ℃ Storage Temperature Tstg -40～+120 ℃ Pulse Forward Current ※1 Derating (Ta=85℃ or higher) ※1 IFRMMeasurement condition : Pulse Width≦1ms., Duty≦1/20. 2006.11.13 Page 3 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Electro-Optical Characteristics Item Forward Voltage Conditions IF=20mA Symbol (Ta=25℃) Characteristics TYP. 1.9 MAX. 2.4 VF Unit V Reverse Current VR =5V IR MAX. 100 μA Peak Wavelength IF=20mA λp TYP. 636 nm IF=20mA λd TYP. 626 nm IF=20mA ⊿λ TYP. 15 nm IF=20mA 2θ1/2 TYP. 140 deg. Dominant Wavelength Spectral Line Half Width Half Intensity Angle 2006.11.13 Page 4 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Luminous Intensity Rank (Ta=25℃) Intensity Tolerance each Rank : +/- 10% Rank BD BE BF CA CB I V （ mc d） MIN. MAX. 33 47 47 68 68 100 100 150 150 220 Condition IF=20mA ※ Please contact our sales staff concerning rank designation. 2006.11.13 Page 5 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Color Tone Groups (λd) (Ta=25℃) Tolerance: +/- 1nm Rank A B Dominant Wavelength λd (nm) MIN. 620 626 MAX. 626 632 Condition IF=20mA ※ Please contact our sales staff concerning rank designation. 2006.11.13 Page 6 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Technical Data Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 20mA Relative Intensity Condition : Ta = 25℃ Wavelength [nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Forward Voltage VF(V) 2006.11.13 Condition : Ta = 25℃ Relative Intensity Forward Current IF(mA) Condition : Ta = 25℃ Forward Current IF(mA) Page 7 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Technical Data Derating Ambient Temperature vs. Relative Intensity Condition : IF=20mA Relative Intensity Maximum Forward Current : IF MAX. (mA) Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 50Hz Ambient Temperature : Ta(℃) Ambient Temperature : Ta(℃) Power Dissipation vs. Ambient Temperature Pulse Width vs. Maximum Tolerable Peak Current IF peak Max./IF DC MAX. Power Dissipation : Pd (mW) Condition : Ta = 25℃ Ambient Temperature : Ta(℃) 2006.11.13 Pulse Width : tw (μs) Page 8 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Technical Data Duty(%) 2006.11.13 Ambient Temperature vs. Forward Voltage Forward Voltage VF(V) Maximum Forward Current : IF MAX. (mA) Duty Cycle vs. Maximum Forward Current Ambient Temperature : Ta(℃) Page 9 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Package Dimensions (Unit: mm) Weight: (8.0)mg Recommended Soldering Pattern Taping Specification (Unit: mm) (Unit: mm) Quantity : 2,500pcs/ reel (standard) 2006.11.13 Page 10 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6℃ maximum) Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2007.8.31 350 ℃ 3 s 1 time (MAX.) (MAX.) (MAX.) Page 11 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Reliability Testing Result Reliability Testing Result Applicable Standard Room Temp. Operating Life EIAJ ED4701/100(101) Resistance to Soldering Heat EIAJ ED4701/300(301) Temperature Cycling EIAJ ED4701/100(105) High Temp. Operating Life Humidity Temp. Operating Life High Temp. Storage Life Low Temp. Storage Life EIAJ ED4701/100(101) EIAJ ED4701/100(102) EIAJ ED4701/200(201) EIAJ ED4701/200(202) Vibration, Variable Frequency EIAJ ED4701/400(403) Testing Conditions Duration Ta = 25℃, IF = Maxium Rated Current Failure 1,000 h 0/25 Twice 0/25 200 cycles 0/25 Ta = 100℃, IF = 15mA 1,000 h 0/25 Ta = 60±2℃, RH = 90±5%, IF = Maxium Rated Current 1,000 h 0/25 Ta = Maximum Rated Storage Temperature 1,000 h 0/25 Ta = Minimum Rated Storage Temperature 1,000 h 0/25 2h 0/10 Pre-heating : 150～180℃ 120s Max. Operation Heating : 230℃ 40s Max. Peak Temperature : 260℃ Minimum Rated Storage Temperature(30min) ～Normal Temperature(15min) ～Maximum Rated Storage Temperature(30min) ～Normal Temperature(15min) 2 98.1m/s (10G), 100 ～ 2KHz sweep for 20min., XYZ each direction Failure Criteria Items Symbols Luminous Intensity Iv Forward Voltage VF Reverse Current IR Cosmetic Appearance - 2007.8.31 Conditions Failure criteria IF Value of each product Luminous Intensity IF Value of each product Forward Voltage VR = Maximum Rated Reverse Voltage V Testing Min. Value ＜ Spec. Min. Value x 0.5 Testing Max. Value ≧ Spec. Max. Value x 1.2 - Occurrence of notable decoloration, deformation and cracking Testing Max. Value ≧ Spec. Max. Value x 2.5 Page 12 FR1106W Single Color Super Wide Angle Type (h=1.3 mm) Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.8.31 Page 13