ON BZX84C12ET1G Zener voltage regulator Datasheet

BZX84CxxxET1G Series,
SZBZX84CxxxET1G Series
Zener Voltage Regulators
250 mW SOT−23 Surface Mount
This series of Zener diodes is offered in the convenient, surface
mount plastic SOT−23 package. These devices are designed to provide
voltage regulation with minimum space requirement. They are well
suited for applications such as cellular phones, hand held portables,
and high density PC boards.
www.onsemi.com
Specification Features
•
•
•
•
•
•
•
•
250 mW Rating on FR−4 or FR−5 Board
Zener Breakdown Voltage Range − 2.4 V to 75 V
Package Designed for Optimal Automated Board Assembly
Small Package Size for High Density Applications
ESD Rating of Class 3 (> 16 kV) per Human Body Model
Peak Power − 225 W (8 X 20 ms)
SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
These Devices are Pb−Free and are RoHS Compliant
SOT−23
CASE 318
STYLE 8
3
Cathode
MARKING DIAGRAM
xxx M G
G
Mechanical Characteristics
CASE: Void-free, transfer-molded, thermosetting plastic case
FINISH: Corrosion resistant finish, easily solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
260°C for 10 Seconds
MAXIMUM RATINGS
Symbol
Max
Unit
Peak Power Dissipation @ 20 ms (Note 1)
@ TL ≤ 25°C
Ppk
225
W
Total Power Dissipation on FR−5 Board,
(Note 2) @ TA = 25°C
Derated above 25°C
Thermal Resistance, Junction−to−Ambient
PD
250
2.0
500
mW
mW/°C
°C/W
300
2.4
417
mW
mW/°C
°C/W
−65 to
+150
°C
RqJA
Total Power Dissipation on Alumina
Substrate, (Note 3) @ TA = 25°C
Derated above 25°C
Thermal Resistance, Junction−to−Ambient
PD
RqJA
Junction and Storage Temperature Range
TJ, Tstg
1
xxx
M
G
POLARITY: Cathode indicated by polarity band
FLAMMABILITY RATING: UL 94 V−0
Rating
1
Anode
= Device Code
= Date Code*
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary depending upon manufacturing location.
ORDERING INFORMATION
Package
Shipping†
BZX84CxxxET1G
SOT−23
(Pb−Free)
3,000 /
Tape & Reel
SZBZX84CxxxET1G
SOT−23
(Pb−Free)
3,000 /
Tape & Reel
BZX84CxxxET3G
SOT−23
(Pb−Free)
10,000 /
Tape & Reel
SZBZX84CxxxET3G
SOT−23
(Pb−Free)
10,000 /
Tape & Reel
Device
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Nonrepetitive current pulse per Figure 9.
2. FR−5 = 1.0 X 0.75 X 0.62 in.
3. Alumina = 0.4 X 0.3 X 0.024 in, 99.5% alumina.
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
DEVICE MARKING INFORMATION
See specific marking information in the device marking
column of the Electrical Characteristics table on page 3 of
this data sheet.
© Semiconductor Components Industries, LLC, 2003
October, 2016 − Rev. 10
1
Publication Order Number:
BZX84C2V4ET1/D
BZX84CxxxET1G Series, SZBZX84CxxxET1G Series
ELECTRICAL CHARACTERISTICS
(Pinout: 1-Anode, 2-No Connection, 3-Cathode) (TA = 25°C
unless otherwise noted, VF = 0.90 V Max. @ IF = 10 mA)
Symbol
Reverse Zener Voltage @ IZT
IZT
Reverse Current
ZZT
Maximum Zener Impedance @ IZT
IR
Reverse Leakage Current @ VR
VR
Reverse Voltage
IF
Forward Current
VF
Forward Voltage @ IF
C
IF
Parameter
VZ
QVZ
I
VZ VR
IR VF
IZT
Maximum Temperature Coefficient of VZ
Max. Capacitance @ VR = 0 and f = 1 MHz
Zener Voltage Regulator
www.onsemi.com
2
V
BZX84CxxxET1G Series, SZBZX84CxxxET1G Series
ELECTRICAL CHARACTERISTICS
(Pinout: 1-Anode, 2-No Connection, 3-Cathode) (TA = 25°C unless otherwise noted, VF = 0.90 V Max. @ IF = 10 mA)
VZ1 (V)
@ IZT1 = 5 mA
(Note 4)
Device
Marking
Min
Nom
Max
ZZT1
(W)
@ IZT1
=
5 mA
BZX84C2V4ET1G
BA1
2.2
2.4
2.6
BZX84C2V7ET1G
BA2
2.5
2.7
2.9
BZX84C3V0ET1G
BA3
2.8
3.0
BZX84C3V3ET1G
BA4
3.1
BZX84C3V6ET1G
BA5
BZX84C3V9ET1G
VZ2 (V)
@ IZT2 = 1
mA
(Note 4)
Min
Max
ZZT2
(W)
@ IZT2
=
1 mA
100
1.7
2.1
100
1.9
2.4
3.2
95
2.1
3.3
3.5
95
3.4
3.6
3.8
BA6
3.7
3.9
BZX84C4V3ET1G
BA7
4.0
BZX84C4V7ET1G
BA9
4.4
BZX84C5V1ET1G
BB1
BZX84C5V6ET1G
VZ3 (V)
@ IZT3=20 mA
(Note 4)
Max
Reverse
Leakage
Current
qVZ
C (pF)
(mV/k)
@
@ IZT1=5 mA
VR = 0
f=
Min Max 1 MHz
Min
Max
ZZT3
(W)
@
IZT3=
20 mA
600
2.6
3.2
50
50
1.0
−3.5
0
450
600
3.0
3.6
50
20
1.0
−3.5
0
450
2.7
600
3.3
3.9
50
10
1.0
−3.5
0
450
2.3
2.9
600
3.6
4.2
40
5.0
1.0
−3.5
0
450
90
2.7
3.3
600
3.9
4.5
40
5.0
1.0
−3.5
0
450
4.1
90
2.9
3.5
600
4.1
4.7
30
3.0
1.0
−3.5
−2.5
450
4.3
4.6
90
3.3
4.0
600
4.4
5.1
30
3.0
1.0
−3.5
0
450
4.7
5.0
80
3.7
4.7
500
4.5
5.4
15
3.0
2.0
−3.5
0.2
260
4.8
5.1
5.4
60
4.2
5.3
480
5.0
5.9
15
2.0
2.0
−2.7
1.2
225
BB2
5.2
5.6
6.0
40
4.8
6.0
400
5.2
6.3
10
1.0
2.0
−2
2.5
200
BZX84C6V2ET1G
BB3
5.8
6.2
6.6
10
5.6
6.6
150
5.8
6.8
6
3.0
4.0
0.4
3.7
185
BZX84C6V8ET1G
BB4
6.4
6.8
7.2
15
6.3
7.2
80
6.4
7.4
6
2.0
4.0
1.2
4.5
155
BZX84C7V5ET1G
BB5
7.0
7.5
7.9
15
6.9
7.9
80
7.0
8.0
6
1.0
5.0
2.5
5.3
140
BZX84C8V2ET1G
BB6
7.7
8.2
8.7
15
7.6
8.7
80
7.7
8.8
6
0.7
5.0
3.2
6.2
135
BZX84C9V1ET1G
BB7
8.5
9.1
9.6
15
8.4
9.6
100
8.5
9.7
8
0.5
6.0
3.8
7.0
130
BZX84C10ET1G
BB8
9.4
10
10.6
20
9.3
10.6
150
9.4
10.7
10
0.2
7.0
4.5
8.0
130
BZX84C11ET1G
BB9
10.4
11
11.6
20
10.2
11.6
150
10.4
11.8
10
0.1
8.0
5.4
9.0
130
BZX84C12ET1G
BC1
11.4
12
12.7
25
11.2
12.7
150
11.4
12.9
10
0.1
8.0
6.0
10
130
BZX84C13ET1G
BC2
12.4
13
14.1
30
12.3
14
170
12.5
14.2
15
0.1
8.0
7.0
11
120
BZX84C15ET1G
BC3
13.8
15
15.6
30
13.7
15.5
200
13.9
15.7
20
0.05
10.5
9.2
13
110
BZX84C16ET1G
BC4
15.3
16
17.1
40
15.2
17
200
15.4
17.2
20
0.05
11.2
10.4
14
105
BZX84C18ET1G
BC5
16.8
18
19.1
45
16.7
19
225
16.9
19.2
20
0.05
12.6
12.4
16
100
BZX84C20ET1G
BC6
18.8
20
21.2
55
18.7
21.1
225
18.9
21.4
20
0.05
14
14.4
18
85
BZX84C22ET1G
BC7
20.8
22
23.3
55
20.7
23.2
250
20.9
23.4
25
0.05
15.4
16.4
20
85
BZX84C24ET1G
BC8
22.8
24
25.6
70
22.7
25.5
250
22.9
25.7
25
0.05
16.8
18.4
22
80
Device*
VZ2 Below
@ IZT2 =
0.1 mA
Device
Marking
Min
Nom
Max
ZZT1
Below
@ IZT1
=
2 mA
Min
Max
ZZT3
Below
@ IZT3
=
10 mA
BZX84C27ET1G
BC9
25.1
27
28.9
80
25
28.9
300
25.2
29.3
BZX84C30ET1G
BD1
28
30
32
80
27.8
32
300
28.1
BZX84C33ET1G
BD2
31
33
35
80
BZX84C36ET1G
BD3
34
36
38
90
30.8
35
325
33.8
38
350
BZX84C39ET1G
BD4
37
39
41
130
36.7
41
BZX84C43ET1G
BK6
40
43
46
150
39.7
BZX84C47ET1G
BD5
44
47
50
170
BZX84C51ET1G
BD6
48
51
54
BZX84C56ET1G
BZX84C62ET1G
BD7
52
56
BD8
58
62
BZX84C68ET1G
BD9
64
BZX84C75ET1G
BE1
70
Device*
Min
Max
Max
Reverse
Leakage
Current
qVZ
(mV/k)
Below
@ IZT1 = 2
mA
V
IR
@ R
(V)
mA
Min
Max
C (pF)
@ VR
=0
f=
1 MHz
45
0.05
18.9
21.4
25.3
70
32.4
50
0.05
21
24.4
29.4
70
31.1
35.4
55
0.05
23.1
27.4
33.4
70
34.1
38.4
60
0.05
25.2
30.4
37.4
70
350
37.1
41.5
70
0.05
27.3
33.4
41.2
45
46
375
40.1
46.5
80
0.05
30.1
37.6
46.6
40
43.7
50
375
44.1
50.5
90
0.05
32.9
42
51.8
40
180
47.6
54
400
48.1
54.6
100
0.05
35.7
46.6
57.2
40
60
200
51.5
60
425
52.1
60.8
110
0.05
39.2
52.2
63.8
40
66
215
57.4
66
450
58.2
67
120
0.05
43.4
58.8
71.6
35
68
72
240
63.4
72
475
64.2
73.2
130
0.05
47.6
65.6
79.8
35
75
79
255
69.4
79
500
70.3
80.2
140
0.05
52.5
73.4
88.6
35
VZ1 Below
@ IZT1 = 2 mA
ZZT2
Below
@ IZT4
=
0.5 mA
V
IR
@ R
(V)
mA
VZ3 Below
@ IZT3 = 10 mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Zener voltage is measured with a pulse test current IZ at an ambient temperature of 25°C
* Include SZ-prefix devices where applicable.
www.onsemi.com
3
BZX84CxxxET1G Series, SZBZX84CxxxET1G Series
8
100
7
θ VZ, TEMPERATURE COEFFICIENT (mV/°C)
θ VZ, TEMPERATURE COEFFICIENT (mV/°C)
TYPICAL CHARACTERISTICS
TYPICAL TC VALUES
6
5
4
VZ @ IZT
3
VZ @ IZT
10
2
1
0
−1
−2
−3
TYPICAL TC VALUES
2
3
4
5
6
7
8
9
10
VZ, NOMINAL ZENER VOLTAGE (V)
11
12
1
10
100
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 1. Temperature Coefficients
(Temperature Range − 55°C to +150°C)
Figure 2. Temperature Coefficients
(Temperature Range − 55°C to +150°C)
1000
IZ = 1 mA
TJ = 255C
IZ(AC) = 0.1 IZ(DC)
f = 1 kHz
IF, FORWARD CURRENT (mA)
Z ZT, DYNAMIC IMPEDANCE ( Ω )
1000
100
75 V (MMBZ5267BLT1)
91 V (MMBZ5270BLT1)
100
5 mA
20 mA
10
10
150°C
1
1
10
VZ, NOMINAL ZENER VOLTAGE
100
1
0.4
Figure 3. Effect of Zener Voltage on
Zener Impedance
0.5
75°C 25°C
0°C
0.6
0.7
0.8
0.9
1.0
VF, FORWARD VOLTAGE (V)
Figure 4. Typical Forward Voltage
www.onsemi.com
4
1.1
1.2
BZX84CxxxET1G Series, SZBZX84CxxxET1G Series
TYPICAL CHARACTERISTICS
1000
1000
C, CAPACITANCE (pF)
0 V BIAS
I R , LEAKAGE CURRENT (μA)
TA = 25°C
1 V BIAS
100
BIAS AT
50% OF VZ NOM
1
10
1
+150°C
0.1
0.01
10
1
100
100
10
VZ, NOMINAL ZENER VOLTAGE (V)
0.001
+ 25°C
0.0001
−55°C
0.00001
0
10
Figure 5. Typical Capacitance
1
0.1
0
2
4
6
8
VZ, ZENER VOLTAGE (V)
100
I Z, ZENER CURRENT (mA)
10
0.01
10
1
0.1
0.01
12
10
TA = 25°C
10
50
70
VZ, ZENER VOLTAGE (V)
PEAK VALUE IRSM @ 8 ms
tr
90
30
PULSE WIDTH (tP) IS DEFINED
AS THAT POINT WHERE THE
PEAK CURRENT DECAY = 8 ms
80
70
60
50
HALF VALUE IRSM/2 @ 20 ms
40
30
tP
20
10
0
0
90
Figure 8. Zener Voltage versus Zener Current
(12 V to 91 V)
Figure 7. Zener Voltage versus Zener Current
(VZ Up to 12 V)
100
80
Figure 6. Typical Leakage Current
TA = 25°C
% OF PEAK PULSE CURRENT
I Z , ZENER CURRENT (mA)
100
20
30
40
50
60
70
VZ, NOMINAL ZENER VOLTAGE (V)
20
40
60
t, TIME (ms)
Figure 9. 8 × 20 ms Pulse Waveform
www.onsemi.com
5
80
90
BZX84CxxxET1G Series, SZBZX84CxxxET1G Series
PACKAGE DIMENSIONS
SOT−23 (TO−236)
CASE 318−08
ISSUE AR
D
0.25
3
E
1
2
T
HE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH.
MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF
THE BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS.
DIM
A
A1
b
c
D
E
e
L
L1
HE
T
L
3X b
L1
VIEW C
e
TOP VIEW
A
A1
SIDE VIEW
c
SEE VIEW C
MIN
0.89
0.01
0.37
0.08
2.80
1.20
1.78
0.30
0.35
2.10
0_
MILLIMETERS
NOM
MAX
1.00
1.11
0.06
0.10
0.44
0.50
0.14
0.20
2.90
3.04
1.30
1.40
1.90
2.04
0.43
0.55
0.54
0.69
2.40
2.64
−−−
10 _
MIN
0.035
0.000
0.015
0.003
0.110
0.047
0.070
0.012
0.014
0.083
0_
INCHES
NOM
MAX
0.039
0.044
0.002
0.004
0.017
0.020
0.006
0.008
0.114
0.120
0.051
0.055
0.075
0.080
0.017
0.022
0.021
0.027
0.094
0.104
−−−
10 _
STYLE 8:
PIN 1. ANODE
2. NO CONNECTION
3. CATHODE
END VIEW
RECOMMENDED
SOLDERING FOOTPRINT*
3X
2.90
3X
0.90
0.95
PITCH
0.80
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
◊
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
BZX84C2V4ET1/D
Similar pages