F-213 FTSH–110–01–L–DV TM FTSH–120–01–F–DV EXTENDED LIFE PRODUCT (1,27 mm) .050" FTSH–125–01–L–DV–EJ 10 year Mixed Flowing Gas with 30µ" Gold Call Samtec for maximum cycles FTSH SERIES SMT MICRO HEADER SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?FTSH Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50µ" (1,27 µm) Ni Current Rating: 1.75A per contact @ 80°C ambient Operating Temp Range: -55°C to +125°C RoHS Compliant: Yes APPLICATIONS Mates with: FFSD, FFTP, CLP, FLE, SFMC, SFMH ALSO AVAILABLE CLP FTSH (1,27 mm) .050" OPTIONS –ES OPTION –P OPTION HORIZONTAL –EC OPTION Ultra-low profile option available. End Shrouds available. Call for FTS Series specifications. –EP OPTION APPLICATION SPECIFIC OPTION Processing: Lead-Free Solderable: Yes SMT Lead Coplanarity: –MT & –DV Tail Option: (0,10 mm) .004" max (02-25) –MT & –DH Tail Option: (0,15 mm) .006" max (26-50) –EJ OPTION –EL OPTION LEAD STYLE NO. PINS PER ROW 1 FTSH Molded Pick & Place pads and latches available. Call Samtec. –TR OPTION –01 = (3,05 mm) .120" Post (Mates with FFSD, CLP–DH) 02 thru 50 100 02 (4,78) .188 (1,27) .050 01 –EX OPTION SHOWN (5,64) .222 OPTION Z – ES (2,57) .101 (15,77) .621 (3,33) .131 (5,87) .231 (6,53) .257 –EJ –EJ OPTION SHOWN –EC No. of positions x (1,27) .050 100 –EP –EL (3,43) .135 (1,27) .050 01 –03 = (1,65 mm) .065" Post (Mates with CLP–D) –DH (Styles –01, –02, –04 only) No. of positions x (1,27) .050 + Z 02 = (1,91 mm) .075" Post (Mates with FLE) (0,81) .032 (0,51) .020 (2,29) .090 99 –02 (5,33) .210 A No. of positions x (1,27) .050 + Z (0,40) .016 SQ 99 –04 = (3,81 mm) .150" Post (Mates with SFMC, SFMH) –05 = (4,32 mm) .170" Post (Mates with CLP–BE) LEAD STYLE – 01 A (5,08) .200 A Note: Some sizes, styles and options are non-standard, non-returnable. Note: See SFM/TFM for positive alignment feature. – 03 (2,51) .099 (2,92) .115 (1,27) .050 – 02 (5,84) .230 –DV WWW.SAMTEC.COM – 04 (1,27) (0,81) (2,29) .050 .032 .090 –MT (Styles –01, –02 & –04 only) – 05 A (3,05) .120 (1,91) .075 (1,65) .065 (3,81) .150 (4,32) .170 FTSH–113–02–L–DH FTSH–130–02–L–DV–EP FTSH–116–02–L–DV FTSH–110–01–F–DV FTSH–116–03–L–DV–EP–P Optional guide post (2,92 mm) .115" Surface mount (1,27 mm) .050" micro pitch TAIL OPTION PLATING OPTION –F = Double Vertical –DH –L = Double Horizontal (Styles –01, –02 & –04 only) = 10µ" (0,25 µm) Gold on post, Matte Tin on tail OTHER OPTIONS FLEX SHROUD OPTIONS –DV = Gold flash on post, Matte Tin on tail (Style –02 & –03 only, –DH & –MT not available) 9 pins/row minimum (Other positions available. Call Samtec.) –ES –K –EJ = Ejector Shroud (Style –01 only) –DH & –MT not available 10 pins/row minimum 25 pins/row maximum = End Shroud –MT Note: Other Gold plating options available. Contact Samtec. = Mixed Technology (Styles –01, –02 & –04 only) (3,05) .120 = Alignment Pin (–DV 3 positions min.) (–DH 5 positions min.) (Metal or plastic at Samtec discretion) –EP = End Shroud with Guide Post (4,83) .190 –C –EL (1,17) .046 (3,05) .120 (1,22) .048 (4,83) .190 (0,89) .035 DIA = End Shroud with Board Lock (Boards are positively locked and cannot be unmated) –EP –ES –A (2,16) .085 (5,08) .200 (11,18) .440 (3,20) .126 (3,30) .130 x (5,08) .200 –EJ –K – EC WWW.SAMTEC.COM (0,86) .034 = (4,00 mm) .157" DIA Polyimide film Pick & Place Pad (–DH only) –P = Pick & Place Pad (–DV 4 positions min.) (–DH & –MT not available) (4,10) .160 (2,29) .090 –EL = Keying Shroud (For mating with FFSD Style –01 only and 05, 08, 10, 13, 17, 20 & 25 pins/row only. 13, 17, 20 & 25 pins/row only with shrouds) (–DV only) –A –EC = End Shroud with Locking Clip (Manual placement required) (1,91) .075 DIA Optional end shrouds and ejector shrouds –P –TR = Tape & Reel Packaging (Flex Shroud options not available except –ES & –EJ)