PhotoMOS RELAYS GU (General Use) Type [2-Channel (Form A Form B) Type] FEATURES 6.4 .252 9.78 .385 3.9±0.2 .154±.008 6.4 .252 9.78 .385 3.6±0.2 .142±.008 mm inch 1 N.C. 8 2 7 3 6 4 5 N.O. 1. Approx. 1/2 the space compared with the mounting of a set of 1 Form A and 1 Form B photoMOS relays 2. Applicable for 1 Form A 1 Form B use as well as two independent 1 Form A and 1 Form B use 3. Low thermal electromotive force (Approx. 1 µV) 4. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 5. Controls load currents up to 0.13 A with an input current of 5 mA with load voltage of 400 V 6. High speed switching: operate time of 300 µs typical. 7. Eliminates the need for a power supply to drive the power MOSFET 8. Extremely low closed-circuit offset voltages to enable control of small analog signals without distortion (Typical 100 pA at 400 V) 9. Stable on resistance TYPICAL APPLICATIONS • High-speed inspection machines • Telephone equipment • Computer TYPES Output rating* Type AC/DC type Part No. Through hole terminal Load voltage Load current 400 V 100 mA Packing quantity Surface-mount terminal Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Tube packing style AQW614 AQW614A AQW614AX AQW614AZ Tube Tape and reel 1 tube contains 40 pcs. 1 batch contains 400 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATINGS 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Symbol IF VR IFP Pin VL AQW614(A) 50 mA 3V 1A 75 mW 400 V IL 0.1 A (0.13 A) Peak load current Power dissipation Total power dissipation Ipeak Pout PT 0.3 A 800 mW 850 mW I/O isolation voltage Viso 1,500 V AC Topr Tstg –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Input Output Temperature limits 78 Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage Continuous load current Operating Storage Remarks f = 100 Hz, Duty factor = 0.1% Peak AC, DC ( ): in case of using only 1a or 1b, 1 channel 100 ms (1 shot), VL = DC Between input and output/between contact sets Non-condensing at low temperatures AQW614 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol LED operate (OFF) current Input LED reverse (ON) current LED dropout voltage On resistance Typical Maximum Minimum Typical Typical Maximum Typical AQW614 0.7 mA (N.O.) 0.9 mA (N.C.) 3 mA 0.4 mA 0.7 mA (N.O.) 0.8 mA (N.C.) 1.14 V (1.25 V at IF = 50 mA) 1.5 V 27 Ω IFon (N.O.) IFoff (N.C.) IFoff (N.O.) IFon (N.C.) VF Ron 50 Ω Maximum ILeak 1 µA Typical Maximum Typical Maximum Typical Maximum Minimum Ton (N.O.) Toff (N.C.) 0.28 ms (N.O.) 0.43 ms (N.C.) 1 ms 0.04 ms (N.O.) 0.3 ms (N.C.) 1 ms 0.8 pF 1.5 pF 1,000 MΩ Maximum Condition IL = 100 mA IL = 100 mA IF = 5 mA IF = 5 mA (N.O.) IF = 0 mA (N.C.) IL = 100 mA within 1 s on time IF = 0 mA (N.O.) IF = 5 mA (N.C.) VL = 400 V Output Off state leakage current Operate (OFF) time* Transfer characteristics Reverse (ON) time* I/O capacitance Initial I/O isolation resistance Toff (N.O.) Ton (N.C.) Ciso Riso Note: Recommendable LED forward current IF = 5 mA. IF = 0 mA ➝ 5 mA IL = 100 mA IF = 5 mA ➝ 0 mA IL = 100 mA f = 1 MHz VB = 0 500 V DC For type of connection, see page 32. *Operate/Reverse time 1) N.O. 2) N.C. Input Input 90% Output Output 10% Ton 10% 90% Toff Toff Ton REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate (OFF) time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 1.2 60 120 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) On resistance, Ω Load current, mA 80 60 40 30 40 20 20 10 0 –40 –20 0 20 40 60 8085 100 Ambient temperature, °C Operate (OFF) time, ms 50 100 0 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 1.0 0.8 0.6 0.4 0.2 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 79 AQW614 4. Reverse (ON) time vs. ambient temperature characteristics 5. LED operate (OFF) current vs. ambient temperature characteristics 6. LED reverse (ON) current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 1.2 0.8 0.6 0.4 0.2 5 4 3 2 –40 –20 0 20 40 60 0 8085 –40 –20 Ambient temperature, °C 8. Voltage vs. current characteristics of output at MOS portion LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Current, mA LED dropout voltage, V 1.5 1.4 1.3 Between terminal 7 and 8 100 (N.C.) 80 60 Between terminal 5 and 6 (N.O.) 40 20 –5 –4 –3 –2 –1 1 2 3 4 5 –20 Voltage, V –40 50mA 30mA 20mA 10mA 5mA 1.1 4 3 2 0 0 20 40 60 8085 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics 1.2 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 5 1 1 –40 –20 0 20 40 60 8085 Ambient temperature, °C 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Off state leakage current, A 0 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) LED reverse (NO) current, mA 1.0 6 6 LED operate (OFF) current, mA Reverse (ON) time, ms Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 10 –3 10 –6 Between terminal 7 and 8 (N.C.) 10 –9 –60 –80 1.0 Between terminal 5 and 6 (N.O.) –100 0 –40 –20 10 0 20 40 60 8085 Ambient temperature, °C –12 20 0 40 60 80 100 Load voltage, V 10. LED forward current vs. operate (OFF) time characteristics 11. LED forward current vs. reverse (ON) time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 3.0 120 Reverse (ON) time, ms Operate (OFF) time, ms 2.5 2.0 1.5 1.0 0.5 0 5/7/2001 80 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 0.5 0.4 0.3 0.2 20 30 40 50 LED forward current, mA 60 0 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 100 80 60 40 20 0.1 10 Output capacitance, pF 0.6 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 10 20 30 40 50 LED forward current, mA 60 0 10 20 30 40 50 Applied voltage, V 60 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.