G16 Vishay Dale Rack and Panel Connectors Side Mount FEATURES • Body components available with any desired pin and socket combination • Floating contacts aid in withstanding vibration • Locking device permits secure mount of individual sections or complete component MATERIAL SPECIFICATIONS G16P-AB G16P-AB APPLICATIONS Broad - limited only by those applications requiring physical, electrical and/or materials specifications exceeding those indicated. Standard Body: Glass-filled diallyl phthalate per ASTM D 5948-96 green, flame retardant Pin Contacts: Brass Socket Contacts: Phosphor bronze Contact Plating: Gold, 10 micro-inches PHYSICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Minimum Creepage between Contacts: 0.20" [5.16 mm] Minimum Air Space between Contacts: 0.16" [3.97 mm] Maximum Wire Size: #16 AWG Breakdown Voltage (Contact to Contact): At sea level: 4000 VRMS At 70 000 feet [21 336 meters]: 550 VRMS Current Rating: 13 A DIMENSIONS in inches [millimeters] G16P-AB G16S-AB 0.218 [5.54] 0.218 [5.54] 0.440 [11.1] 0.440 [11.1] 0.250 [6.35] 0.062 [1.59] Dia. Typ. Body 0.750 [19.1] 0.250 [6.35] 0.530 [13.5] 0.250 [6.35] 0.089 [2.26] Dia. thru 82° CSK 0.203 [5.16] Dia. Both Sides, 1 Hole Pin Contact 0.340 [8.7] .0890 .089 [2.26] Dia 0.089 [2.26] Dia. thru 82° CSK 0.203 [5.16] Dia. Both Sides, 1 Hole “C” Ring 0.530 [13.5] Solder Cup #16 AWG Wire 0.250 [6.35] Socket Contact 0.340 [8.7] ORDERING INFORMATION G16 MODEL G16 - Side Mount with 2 positions for #16 AWG contacts EXAMPLE 1: G16P-AB = Connector with pin contacts in position “A” and “B” www.vishay.com 23 AB B A CONTACT VARIATIONS S P BODY STYLE P - Pin style body. S - Socket style body. These designators are used to identify mating connectors. If designator 3 is the same, a connector designated G16P will mate with a connector designated G16S EXAMPLE 2: G16S-AB = Connector with socket contacts in positions “A” and “B” (would mate with Example 1 at left) Designates pin contact positions in G16P connector and socket contact positions in a G16S connector EXAMPLE 3: G16P-A = Connector with pin contact in position “A” and a socket contact in position “B” For technical questions contact: [email protected] EXAMPLE 4: G16S-A = Connector with socket contact in position “A” and a pin contact in position “B” (would mate with Example 3 at left) Document Number: 36019 Revision: 08-Feb-07 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1