OFMS Series 1x8 Optical Fiber Switches OFMS 1x8 Series Product Description The OFMS series 1x8 optical fiber switch is based on Oplink’s patented opto-mechanical switches with unique prism design to improve the switch repeatability and stability. The switches are designed for use in optical channel monitoring, optical cross-connect systems, and network switching for fault protection applications. Oplink provides customized design to meet special control and applications. Also, Oplink offers modular assemblies that integrate other components to form a full function module or subsystem. Performance Specificationns Parameters Value Unit 1528~1610 nm < 2.0 dB Polarization Dependent Loss < 0.2 dB Return Loss > 50 dB Channel Cross Talk > 50 dB Wide Operating Wavelength Range Repeatability ± 0.05 dB Fast Switch Speed Switching Time < 20 ms Highly Stable & Reliable Optical Power Handling 300 mW Low Insertion Loss Operating Wavelength Range Insertion loss 1,2 2 Fiber Type Operating Temperature Low PDL Corning SMF-28 0 ~70 °C -40 ~ 85 °C +5 V Switch Driving Current at 5V Power Supply < 250 mA Durability > 10 7 Cycles Storage Temperature Switch Power Supply Voltage (Vcc1) Switch Type Control Interface Control Features Compact Applications Network Monitoring and Switching Network Protection and Restoration Latching Instrument, Testing and Measurement CMOS 3 bit, Latching Electrical Connector Type Fixed male connector mates with BERG 91763-110 Female Receptacle Dimensions (P2 package) 86.0 (L) x 80.0 (W) x 22.0 (H) mm Notes: 1) Insertion loss is specified at 23°C over all wavelength range and all SOP. 2) Insertion loss and return loss: without connectors. R02.20090528 OFMS Series 1x8 Optical Fiber Switches OFMS1x8 Series 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com Mechanical Drawing / Package Dimensions (dimension in mm) Electrical Connector Configuration Optical Path Electrical Drive Control Input Status Sensor PIN# 1 2 3 4 5 6 7 8 9 10 NAME Vcc1 Agnd D0 D1 D2 Start Ready Error Dgnd Vcc2 FUNCTION Switch Power Supply Switch Power Return Start Strobe Low= Ready Low= Error CMOS Ground CMOS Power Supply Control (D2, D1, D0) 000 001 010 011 100 101 110 111 Selected Port 1 2 3 4 5 6 7 8 Port Selection, Data bus Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. OFMS 1 8 0 0 E 0 0 2 Wavelength Package Type Fiber Length C+L bands = E P2 = 2 0.5meter= H 1.0meter= 1 1.5meter= 5 2.0meter= 2 Fiber Type SMF-28 250µm =1 SMF-28 w/ 900µm loose tube =2 Connector Type None = 1 FC/PC=2 FC/SPC=3 FC/APC=4 SC/PC=5 SC/SPC=6 SC/APC=7 ST=8 LC=9 MU=A R02.20090528 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules