GS60 60W AC-DC Single Output Desktop series Features : Universal AC input / Full range 3 pole AC inlet IEC320-C14 Protections: Short circuit / Overload / Over voltage/ Over temperature Fully enclosed plastic case Approvals: UL / CUL / TUV / BSMI / CB / FCC / CE Class power ( with earth pin) Pass LPS LED indicator for power on No load power consumption<0.3W Meet EISA 2007(Energy Independence and Security Act) 2 years warranty ORDER NO. DC VOLTAGE GS60A05 Note.2 5V GS60A15 GS60A18 GS60A24 12V 15V 18V 24V GS60A48 48V 6A 6A 5A 4A 3.33A 2.5A 1.25A 0 ~ 1.25A 0 ~ 6A 0 ~ 6A 0 ~ 6A 0 ~ 5A 0 ~ 4A 0 ~ 3.33A 0 ~ 2.5A RATED POWER (max.) 30W 45W 54W 60W 60W 60W 60W 60W 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.3 100mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 3.0% 2.5% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 3.0% 2.5% 88.5% 88.5% Note.5 Note.7 1000ms, 30ms / 230VAC 1000ms, 30ms / 115VAC at full load HOLD UP TIME (Typ.) VOLTAGE RANGE 50ms / 230VAC 15ms / 115VAC at full load 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 81% AC CURRENT (Typ.) INRUSH CURRENT (max.) 1.4A / 115VAC OVERLOAD PROTECTION OVER VOLTAGE 85.5% 87.5% 88% 92% 25.2 ~ 32.4V 50.4 ~ 64.8V 65A / 230VAC 0.75mA / 240VAC 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.25 ~ 6.75V 7.88 ~ 10.13V 9.45 ~ 12.15V 12.6 ~ 16.2V 15.75 ~ 20.25V 18.9 ~ 24.3V Protection type : Shut down o/p voltage, re-power on to recover RTH2 > 70 Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. WORKING HUMIDITY -30 ~ +50 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note. 6) EMC EMISSION 90% 1A / 230VAC OVER TEMPERATURE ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION NOTE GS60A12 9V CURRENT RANGE LEAKAGE CURRENT(max.) CONNECTOR GS60A09 7.5V 6A SETUP, RISE TIME OTHERS GS60A07 RATED CURRENT LOAD REGULATION INPUT geprUfre Sicherheit GS60A05-P1J GS60A07-P1J GS60A09-P1J GS60A12-P1J GS60A15-P1J GS60A18-P1J GS60A24-P1J GS60A48-P1J SAFETY MODEL NO. OUTPUT TUV Rheinland Product Safety (except for 48V) SPECIFICATION -40 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, BSMI CNS14336, J60950-1(except for 48V) approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB17625.1 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A MTBF DIMENSION PACKING PLUG 711Khrs min. MIL-HDBK-217F(25 ) 125*50*31.5mm (L*W*H) 0.305Kg; 40pcs/13.02Kg/1.05CUFT Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested CABLE See page 2 ; Other type available by customer requested 1. All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2. DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4. Tolerance: includes set up tolerance, line regulation, load regulation. 5. Line regulation is measured from low line to high line at rated load. 6. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. 7. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. File Name:GS60-SPEC 2011-06-15 GS60 60W AC-DC Single Output Desktop Mechanical Specification Case No. 974A Unit:mm UL2624 16AWG 1000 50mm for 5 ~ 9V UL1185 16AWG 1000 50mm for 12 ~ 15V UL1185 18AWG 1800 50mm for 18 ~ 48V 125 31.5 series POWER LED 70 10mm 50 C"+" 11 0.5mm ID 2.1 x OD 5.5 Plug Assignment Standard plug: P1J P1J Derating Curve P/N OUTPUT CENTER + Static Characteristics Ta=25 100 100 90 80 80 70 50 LOAD (%) LOAD (%) 60 40 20 -30 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:GS60-SPEC 2011-06-15