0805 CHIP INDUCTORS High Reliability Chip Inductors MS336RAD The MS336RAD inductors provide exceptional Q values, even at high frequencies. They have a ceramic body and wire wound construction to provide the highest SRFs, tight inductance tolerance and batch consistency. Inductance2 (nH) Part number1 MS336RAD2N5JSZ MS336RAD5N6JSZ MS336RAD6N2JSZ MS336RAD12NJSZ MS336RAD16N_SZ MS336RAD18N_SZ MS336RAD20N_SZ MS336RAD27N_SZ MS336RAD30N_SZ MS336RAD39N_SZ MS336RAD48N_SZ MS336RAD51N_SZ 2.5 @ 250 MHz 5.6 @ 250 MHz 6.2 @ 250 MHz 12 @ 250 MHz 16 @ 250 MHz 18 @ 250 MHz 20 @ 250 MHz 27 @ 250 MHz 30 @ 250 MHz 39 @ 250 MHz 48 @ 200 MHz 51 @ 200 MHz This robust version of Coilcraft’s standard 0805HQ series features high temperature materials that allow operation in ambient temperatures up to 155°C. The leach-resistant base metalization with tin-lead (Sn-Pb) terminations ensures the best possible board adhesion. Percent SRF min4 tolerance Q min3 (GHz) 5 5 5 5 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 56 @ 1000 MHz 83 @ 1000 MHz 80 @ 1000 MHz 52 @ 500 MHz 72 @ 500 MHz 70 @ 500 MHz 54 @ 250 MHz 58 @ 250 MHz 50 @ 250 MHz 53 @ 250 MHz 44 @ 150 MHz 36 @ 150 MHz >5.00 4.88 4.55 2.80 2.40 2.20 2.05 2.00 1.74 1.60 1.40 1.28 DCR max5 (Ohms) Imax (A) 0.020 0.035 0.035 0.045 0.060 0.060 0.060 0.070 0.095 0.110 0.095 0.120 2.0 1.9 1.8 1.6 1.4 1.4 1.4 1.3 1.1 1.0 1.1 0.9 1. When ordering, please specify tolerance and testing codes: Core material Ceramic MS336RAD51NGSZ Tolerance: F = 1% G = 2% J = 5% Testing: Z = COTS H = Screening per Coilcraft CP‑SA‑10001 N = Screening per Coilcraft CP‑SA‑10003 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286 impedance analyzer or equivalent with Coilcraft-provided correlation pieces. 3. Q measured at the same frequency as inductance using an Agilent/HP 4291A with an Agilent/HP 16197 test fixture or equivalents. 4. SRF measured using an Agilent/HP 8753ES network analyzer or equivalent and a Coilcraft SMD-D test fixture. 5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a Coilcraft CCF858 test fixture. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Terminations Tin-lead (63/37) over silver-platinum-glass frit Ambient temperature –55°C to +125°C with Imax current, +125°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 2000 per 7″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth Document MS197-1 Revised 11/06/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 0805 CHIP INDUCTORS MS336RAD Series (0805) Typical Q vs Frequency Typical L vs Frequency 70 140 6.2 nH 16 nH 120 48 nH 60 2.5 nH 80 Inductance (nH) Q Factor 100 20 nH 30 nH 60 48 nH 40 50 20 10 0 0 100 1000 5000 20 nH 30 20 10 30 nH 40 16 nH 6.2 nH 2.5 nH 10 1 Frequency (MHz) Irms Derating B overall 120 C F 110 A 100 90 E terminal 80 70 1000 5000 H Pick and place material I G J F I D Terminal wraparound: approx 0.015/0,38 both ends Suggested Recommended LandPattern Pattern Land 60 A B C D max max max ref E F G H I J 0.090 0.068 0.060 0.020 0.050 0.020 0.040 0.070 0.040 0.030 inches 2,29 1,73 1,52 0,51 1,27 0,51 1,02 1,78 1,02 0,76 mm 50 40 25°C Percent of rated Irms 100 Frequency (MHz) 30 Note: Dimensions are before solder application. For maximum overall dimensions including solder, add 0.0025 in / 0,064 mm to B and 0.006 in / 0,15 mm to A and C. 20 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Document MS197-2 Revised 11/06/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.