BeRex BD25B Quadruple band 2-way smt power divider Datasheet

BD25B
Quadruple Band 2-Way SMT Power Divider
1700~2500MHz USPCS & PCS, WCDMA & TD-SCDMA, WiBro
Device Features
•
•
•
•
Typical Isolation = 23 dB
Typical Insertion Loss = 0.5 dB
MSL 3 moisture rating
Lead-free/RoHS-compliant SOIC-8 Plastic Package
With exposed back side ground pad
Product Description
Typical Performance1
BeRex’s Divider BD25B is designed for PCS,
WCDMA & TD-SCDMA and WiBro band with
low Insertion Loss and Isolation. This chip is
fully passivated for enhanced performance
and reliability and packaged in RoHScompliant with SOIC-8 surface mount package. It can be used without back side ground
soldering. (This may degrade the performance at the high frequency edge.)
Parameter
Min
Frequency Range
Insertion Loss
Typical
1700
0.5
Isolation
15
Max
Unit
2500
0.8
MHz
dB
23
dB
IRL(S11)
-20
-15
dB
ORL(S22/S33)
Amplitude Balance
Phase Balance
-23
0.05
0.7
-15
0.2
2.0
dB
dB
deg
*All specifications apply to the following test conditions,
1. Device performance _ measured on BeRex E/B at 25°C, 50ohm system.
2. Insertion Loss: Above 3.0dB.
3. Back side ground _ soldered.
Applications
Absolute Maximum Ratings
• Base station Infrastructure
• Commercial/Industrial/Military wireless system
Parameter
Input Power
Storage Temperature
Operating Temperature
Rating
1W CW dBm
-55 to +155°C
-40 to +85°C
Operation of this device above any of these parameters may result in permanent damage.
Evaluation Board Drawing
Function Block Diagram
Pins 1,3,4,6 and 7 must be DC and RF grounded.
BeRex
●website: www.berex.com
●email: [email protected]
1
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. F
BD25B
Quadruple Band 2-Way SMT Power Divider
1700~2500MHz USPCS & PCS, WCDMA & TD-SCDMA, WiBro
Typical Test Data
With Back Side Ground Soldering
TD-SCDMA
Parameters
Unit
USPCS & PCS
WiBro
Frequency Range
MHz
1700
1800
1900
1900
2075
2250
2200
2350
2500
Insertion Loss
dB
0.37
0.38
0.38
0.38
0.42
0.53
0.48
0.60
0.75
Isolation
dB
19.6
20.8
21.9
21.9
25.7
28.9
30.6
22.2
15.5
IRL(S11)
dB
-21.3
-23.7
-25.4
-25.4
-22.0
-17.3
-18.5
-15.2
-12.6
ORL(S22,S33)
dB
-24.4
-32.2
-33.9
-33.9
-24.7
-22.4
-22.6
-22.5
-22.7
Phase Diff.
deg
0.2
0.2
0.3
0.3
0.4
0.5
0.5
0.7
0.7
Amplitude Balance
dB
0.07
0.07
0.07
0.08
0.09
0.10
0.10
0.12
0.10
WCDMA
Without Back Side Ground Soldering
BeRex
Parameters
Unit
USPCS & PCS
Frequency Range
MHz
1700
1800
1900
1900
2075
2250
2200
2350
2500
Insertion Loss
dB
0.40
0.41
0.42
0.42
0.49
0.64
0.59
0.75
0.94
Isolation
dB
19.5
21.1
22.7
22.7
26.3
23.6
25.7
19.0
13.7
IRL(S11)
dB
-20.8
-21.7
-21.1
-21.1
-17.8
-14.3
-15.2
-12.4
-10.2
ORL(S22,S33)
dB
-25.9
-37.8
-31.5
-31.5
-22.8
-20.3
-20.6
-19.9
-19.4
Phase Diff.
deg
1.5
1.5
1.6
1.6
1.7
1.7
1.7
1.7
2.0
Amplitude Balance
dB
0.08
0.08
0.09
0.09
0.11
0.10
0.11
0.10
0.08
●website: www.berex.com
TD-SCDMA
WiBro
●email: [email protected]
2
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. F
BD25B
Quadruple Band 2-Way SMT Power Divider
1700~2500MHz USPCS & PCS, WCDMA & TD-SCDMA, WiBro
Insertion Loss vs. Frequency
Isolation vs. Frequency
IRL vs. Frequency
ORL vs. Frequency
Notes)
- BG: Data taken with backside ground soldering
- NBG: Data taken without backside ground soldering
BeRex
●website: www.berex.com
●email: [email protected]
3
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. F
BD25B
Quadruple Band 2-Way SMT Power Divider
1700~2500MHz USPCS & PCS, WCDMA & TD-SCDMA, WiBro
Package Outline Drawing
BeRex
●website: www.berex.com
●email: [email protected]
4
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. F
BD25B
Quadruple Band 2-Way SMT Power Divider
1700~2500MHz USPCS & PCS, WCDMA & TD-SCDMA, WiBro
Suggested PCB Land Pattern and PAD Layout
PCB Land Pattern
RF In
0.047"(1.20)
PCB Mounting
0.018"(0.45)
0.076"(1.92)
0.157"(3.98)
0.040"(1.01)
RF Out1
RF Out2
0.030"(0.76)
0.198"(5.02)
Note : All dimension _ millimeters
PCB lay out _ on BeRex website
Package Marking
Tape & Reel
Packaging information:
SOIC8
SOIC8-Part orientation
Tape Width (mm): 12
YY = Year, WW = Working Week,
XX = Wafer No.
Reel Size (inches): 7
Device Cavity Pitch (mm): 8
Direction of feed
Devices Per Reel: 1000
Lead plating finish
100% Tin Matte finish
(All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin
whisker growth concerns.)
BeRex
●website: www.berex.com
●email: [email protected]
5
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. F
BD25B
Quadruple Band 2-Way SMT Power Divider
1700~2500MHz USPCS & PCS, WCDMA & TD-SCDMA, WiBro
MSL / ESD Rating
MSL Rating:
Level 3 at +265°C convection reflow
Standard:
JEDEC Standard J-STD-020
NATO CAGE code:
2
BeRex
N
9
6
F
●website: www.berex.com
●email: [email protected]
6
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2018 BeRex
Rev. F
Similar pages