MADP-000506-014400 Bolt Channel PIN Diode V2 MILS MIN. MAX. 20 249 255 118 128 159 162 57 67 202 208 405 415 5 9 125 145 93 99 76 82 76 82 127 Maximum 133 Absolute DIM. Electrical Specifications @ TAMB = +25°C Symbol Units Conditions Min. Typ. Max. CJ pF 1 MHz / 100V - - 0.7 RS Ω 100 MHz / 100mA - - 0.30 VF V +100mA - - 1.0 IR µA -500V - - 1 TL μS IF 10mA/IR 6mA - 3 - µm micron I Region θ °C/W - A B C D E F G H I J K L M MILLIMETERS MIN. MAX. 0.51 6.32 6.48 3.00 3.25 4.04 4.11 1.45 1.70 5.13 5.28 10.30 10.50 0.13 0.23 3.18 3.68 2.36 2.51 1.93 2.08 1.93 2.08 1 3.38 3.23 Ratings Parameter Maximum Voltage 500 Operating Temperature - 65°C to +150°C Storage Temperature - 65°C to +200°C Junction Temperature +175°C Soldering Temperature 280°C for 10 seconds 1. Exceeding any one of the above conditions may cause permanent damage to the device. 51 15 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.