MWD Series Micro-D Plastic Shell Solder Cup MWD Plastic – These connectors feature gold plated TwistPin contacts and mil spec crimp termination. High temperature liquid crystal polymer (LCP) housings are 30% glass-filled. Solder Cup Contacts – Choose standard size contacts for #26 gage, or select oversize contacts for #24 AWG solid or stranded wire. MWD Low-Profile Plastic Micro-D’s do not have an interfacial seal, and are smaller and lighter weight than metal shell versions. HOW TO ORDER MWD PLASTIC SHELL PRE-WIRED MICRO-D CONNECTORS Series Contact Layout MWDL 9 15 21 25 31 37 51 Contact Type Termination Size #26 Solder Cup Contacts (Standard) P – Pin S – Socket S – Solder Cup Hardware B P M M1 S S1 Size #24 Solder Cup Contacts N – Pin T – Socket Sample Part Number MWDL – 25 S S B MICRO-D MOUNTING HARDWARE B P M M1 S S1 Thru-Hole Jackpost Jackscrew Jackscrew Jackscrew Jackscrew Order Hardware Separately Removable Includes Nut and Washer Hex Head Removable E-ring Hex Head Removable E-ring Extended Slot Head Removable E-ring Slot Head Removable E-ring Extended © 2006 Glenair, Inc. GLENAIR, INC. www.glenair.com CAGE Code 06324/0CA77 Printed in U.S.A. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 K-2 E-Mail: [email protected] MWD Series Micro-D Plastic Shell Solder Cup PERFORMANCE SPECIFICATIONS Current Rating DWV Insulation Resistance Contact Resistance Operating Temperature Shock, Vibration Mating Force MATERIALS AND FINISHES Connector Shell Insulator Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant 3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts) A B C Liquid Crystal Polymer (LCP) Liquid Crystal Polymer (LCP) Flourosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215 .110 (2.79) MAX D SOCKET CONNECTOR .096/.088 (2.43/2.23) DIA. J H D .200 (5.08) MAX PIN CONNECTOR .100/.088 (2.54/2.24) E F G DIMENSIONS A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S B C Max. In . mm. In. mm. ± .003 ± 0.08 .785 .785 .935 .935 1.080 1.080 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 19.94 19.94 23.75 23.75 27.43 27.43 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 © 2006 Glenair, Inc. GLENAIR, INC. www.glenair.com In. mm. .292 .380 .442 .530 .592 .680 .692 .780 .842 .930 .992 1.080 .942 1.030 7.42 9.65 11.23 13.46 15.04 17.27 17.58 19.81 21.39 23.62 25.20 27.43 23.93 26.16 D Max. In. .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .218 .260 .260 mm. 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 5.54 6.60 6.60 E Max. In. .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 .202 .185 mm. 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 5.13 4.70 CAGE Code 06324/0CA77 F Max. G Max. H Max. In. mm. In. mm. In. .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 .395 .375 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 10.03 9.53 .408 .408 .558 .558 .708 .708 .808 .808 .958 .958 1.108 1.108 1.058 1.058 10.36 10.36 14.17 14.17 17.98 17.98 20.52 20.52 24.33 24.33 28.14 28.14 26.87 26.87 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 .220 .220 J Max. mm. In. 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 4.39 5.59 5.59 mm. .139 3.53 .139 3.53 .139 3.53 .139 3.53 .139 3.53 .139 3.53 .182 4.62 Printed in U.S.A. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 K-3 E-Mail: [email protected] K