DIGITRON SEMICONDUCTORS MBR2060CT-MBR20100CT 20A SCHOTTKY RECTIFIERS MAXIMUM RATINGS Rating Symbol MBR Unit 2060CT 2070CT 2080CT 2090CT 20100CT 60 70 80 90 100 Peak repetitive reverse voltage Working peak reverse voltage DC blocking voltage VRRM VRWM VR Average rectified forward current (Rated VR) IF(AV) 10 @ TC = 133°C A Peak repetitive forward current (Rated VR, square wave, 20kHz) IFRM 20 @ TC = 133°C A Non-repetitive peak surge current (surge applied at rated load conditions, halfwave, single phase, 60Hz) IFSM 150 A Peak repetitive reverse surge current (2.0µs, 1.0kHz) IRRM 0.5 A Operating junction temperature range Storage temperature range Voltage rate of change (Rated VR) Maximum thermal resistance Junction to case Junction to ambient V TJ -65 to +150 °C Tstg -65 to +175 °C dv/dt 1000 V/µs RӨJC 2.0 60 °C/W RӨJC ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Parameter Maximum instantaneous forward voltage (IF = 10A, TC = 125°C) (IF = 10A, TC = 25°C) (IF = 20A, TC = 125°C) (IF = 20A, TC = 25°C) Maximum instantaneous reverse current (Rated dc voltage, TC = 125°C) (Rated dc voltage, TC = 25°C) Symbol MBR 2060CT 2070CT 2080CT Unit 2090CT 20100CT (1) 0.75 0.85 0.85 0.95 VF V (1) IR mA 150 0.15 Note 1: Pulse test: Pulse width = 300ms, duty cycle ≤ 2%. MECHANICAL CHARACTERISTICS Case TO-220AB Marking Alpha-numeric Polarity Cathode band 144 Market Street Kenilworth NJ 07033 USA TO-220AB A B C D F G H J K L N Q R S T U phone +1.908.245-7200 fax +1.908.245-0555 Inches Min Max 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.050 Millimeters Min Max 14.480 15.750 9.660 10.280 4.070 4.820 0.640 0.880 3.610 3.730 2.420 2.660 2.800 3.930 0.460 0.640 12.700 14.270 1.150 1.520 4.830 5.330 2.540 3.040 2.040 2.790 1.150 1.390 5.970 6.470 1.270 [email protected] www.digitroncorp.com Rev. 20121204 DIGITRON SEMICONDUCTORS MBR2060CT-MBR20100CT 20A SCHOTTKY RECTIFIERS Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. 144 Market Street Kenilworth NJ 07033 USA phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20121204