DIN 41612 TYPE HALF C (HC) – FEMALE 16, 24, 32 and 48 Contacts 3 Rows Class 2 and 3 2.54mm(0.1”), 5.08mm(0.2” Half loaded) Pitch High Reliability UL Approved SPECIFICATION Electrical Insulator: Glass filled polyester (PBT, UL flammability 94V-0) Contacts: Female copper alloy, male brass Contact finish: Contact area: Gold over nickel (per requirements of performance class 3, class 2) Termination area: Tin - plated or Gold-plated for long wrap post Current rating: 20°C 2A 70°C 1A 100°C 0.5A Contact resistance: ≤20mΩ (testing current 100mA) ≤40mΩ after 400 mating cycles Capacitance between adjacent contacts: Appr. 2pF Insulation resistance: ≥1012Ω (between adjacent contacts at 100 VDC) Test voltage: 1,000Vrms between contacts (2.54mm spacing) 46.9 1,550Vrms between contacts (5.08mm spacing) 44.6 6.4 1,550Vrms between 13 contacts and body 3.7 Operating voltage: 250V AC Mechanical Insertion force: 48 contacts max. 45N 32 contacts max. 30N 24 contacts max.25N 16 contacts max. 15N Withdrawal force per contact: min 0.15N Temperature range: 2.54 Ø2.5 48.26 Agency approval -55°C to +125°C Air and creepage distance 1.2mm min. U/L Electric rating: Mating Cycles: 4 250V, 2A Class 2 = 400 3 -0.4 15x2.54=38.1 2.54 1a 1b3 = 50 Class1c 11.1 MAX 54 MAX OUTLINE DRAWING PCB LAYOUT ac bb ca ac bb ca 4 4 4 1 2 3 4 1 2 3 4 ++ ++ 1 2 3 4 ac bb ca ++ ++ ac bb ca ++ ++ ++ ++ ac bb ca + + + ac b b ca + + ++++ + + 1 2 3 4 1 2 3 4 + + + 1 2 3 4 ORDERING INFORMATION DBC DIN F 16 HC A S 3 Dubilier Connectors Series Connector Type Nº of Ways Housing Style Termination Style Quality Class DIN 41612 F = Female 16 =16 ways 24 = 24 ways 32 = 32 ways 48 = 48 ways HC = Half C Position of Contacts A, AB, AC, ABC, ABC1 = A+B+C even n°. AC1=AC even n°. S = Straight Solder Tail length options available on request 3 = class 3 2 = class 2 241 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SECTION 10 Material 8.7 18 6