TERMINAL BLOCKS 3.5mm PITCH VERTICAL MOUNT - LOW PROFILE 3.5mm Pitch UL/CSA approved Low profile Interlocking UL94V-0 Flame retardant material Professional rising clamp 0.75mm2 wire acceptance SPECIFICATION Rating: Dielectric Strength: Insulation Resistance: Working temperature: Short Period: Moulding: OUTLINE DRAWING 10 7 7 15 10.5 Pin/terminal: Rising clamp: Screw/torque: 9A/130 Vac 1.5KV >5MΩ -20°C to 125°C 160° UL94V-0 flame retardant nylon 66 Recommended PCB hole size: 7 9.1 9.1 2.1 2.7 13.8 2.1 3.5 DBC 3.5 3.5 5 7.3 3.5 0.9 3.5 3.5 3.5 5 7.3 3.5 0.5 3.5 7.3 3.5 1 /2 Style Nº of Ways 0.5 Terminal Block 2 = 2 ways 3 = 3 ways 0.5 4.6 3.5 0.9 5 TB Series 0.9 3.5 3.5 0.9 3.5 Dubilier Connectors 2.7 2.1 3.5 3.5 3.5 3.5 2.1 3.5 2.1 10.5 9.1 9.1 ORDERING INFORMATION 9.1 2.1 3.5 13.8 ø1.1mm 10.5 3.5 9.1 5 micron tinned nickel plated brass 5 Nickel flashed brass M2 steel/0.3Nm 6 micron zinc colour passivated and tropicalised T•P T•P DU RO C NEW 9.8 TERMINAL BLOCKS 3.5mm PITCH VERTICAL MOUNT DU RO C 3.5mm Pitch UL/ CSA approved Ultra Low Profile Interlocking Flame Retardant Material Screw terminal 1mm2 wire acceptance SPECIFICATION Rating: Dielectric Strength: Insulation Resistance: Working temperature: Short Period: Moulding: Pin/terminal: Wire protector: Screw/torque: 10A/125V 1.5KV ≥5MΩ/1000V -33°C to 125°C 160° UL94V-0 flame retardant PA66 Recommended PCB hole size: ø1.1mm ORDERING INFORMATION 7.00+0.10 - 0.40 8.40+0.10 - 3.50 10.5 0 2.0 4.10+0.10 - SECTION 18 OUTLINE DRAWING 7.5 5µ tinned, nickel plated copper flash brass Nickel plated brass M2 steel, 5µ zinc & colour passivated and tropicalised/0.4Nm max DBC TB 56 /2 Dubilier Connectors Series Style Nº of Ways Terminal Block 0.90 2 = 2 ways 3 = 3 ways 4.00 * Other Number of ways are available up to 12 Please consult office for further details 366 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758