DG85*M series automotive / industrial relays • General purpose automotive or industrial relays • High inrush capabilities • Ideal for DC Motor Control • High continuous DC current capacity • Industry standard terminal arrangement • Optimised for up to 145VDC switching with magnetic arc blowout • RoHS Compliant Contacts Contact number & arrangement SPST-NO (1 Form A); SPDT (1 Form C) Contact material AgSnO2 Max. switching voltage DC 145VDC (DG85CM) DG85BM (SPST-NO & SPDT) DG85CM (SPST-NO only) 25A @ 36VDC 20A @ 48VDC 15A @ 72VDC 7A @ 110VDC 60A @ 36VDC 50A @ 48VDC 40A @ 60VDC 25A @ 72VDC 10A @ 110VDC 5A @ 145VDC 120A @12.8VDC 150A @ 12.8VDC 100mA / 12VDC 100mA / 12VDC Contact rating (through normally open and normally closed contacts) Max. switching current (3sec) Min. switching current Initial contact resistance <100mΩ, max. at 0.1A/6VDC Coil Rated voltage DC 6...110V Must release voltage See coil table 1 Operating range of supply voltage See coil table 1 Rated power consumption DC 1.7W / 1.8W (DG85BM) / 1.92W (DG85CM) Insulation Insulation resistance 100MΩ at 500VDC, 50%RH, 25°C Dielectric strength coil to contact 750Vrms, 1min contact to contact 500Vrms, 1min General Data Operating time (typical) mS ≤ 15mS (excluding bounce and without coil suppression) Release time (typical) mS ≤ 15 mS (excluding bounce and without coil suppression) Electrical Life ops 1 x 105 Mechanical life ops 1 x 106 Dimensions LxWxH Weight 35 x 30.5 x 27mm (25mm for DG85BM) 65g approx. depending on style and mounting Ambient temperature storage operating -40 to 85°C (Maximum = 155°C) -40 to 85°C (at nominal coil voltage - see Coil Data, Table 1) Shock resistance Functional: 30g 8mS; Destructive: 100g Vibration resistance 10 - 2000Hz, 4.4g (DG85BM) / 10 - 50Hz, 4.4g (DG85CM) Page 1 of 4 Ref: DG85*M 022112JHM www.durakoolrelays.com Sales Department Tel: (888) 847-6552 DG85*M series automotive / industrial relays Coil Data Table 1 Coil resistance (Ω) ±10% Coil voltage code Nominal voltage (VDC) 1006 1009 1012 12 75 1024 24 250 1036 36 650 1048 48 1100 1110 110 5500 Must operate voltage Max. (VDC) Must release voltage min. (VDC) SPST-NO ( DG85BM & DG85CM ) SPDT ( DG85BM ) 6 20 * 4.0 9 45 * 6.0 85 305 * 24.0 * 32.0 * 73.2 Parallel resistor (option) (Ω) ±10% SPST-NO ( DG85BM & DG85CM ) SPDT ( DG85BM ) 0.6 150 * 0.9 330 * 8.0 1.2 1000 1000 16.0 2.4 2200 2200 3.6 4700 * 4.8 10000 * 11.0 not available not available All specifications at 23°C ambient * Contact factory for availability. Ordering codes Contact material Type D G 8 5 M - 5 0 Contact arrangement Cover protection and mounting - Coil code - Options - Series B - 25A @ 36VDC C - 60A @ 36VDC see Table 1 Contact material 50 - AgSnO2 Options 1 Nil - No options Contact arrangement 11 - SPDT (1C/O, 1 Form C) DG85BM only) 21 - SPST-NO (1N/O, 1 Form A) Options 2 Nil - No options Cover protection category R - Integral resistor 7 - in cover, dust cover - IP54 D - Integral diode +85, -86 9 - Cover with plastic mounting bracket DR - Integral diode reversed -85, +86 Connection mode 5 - PCB Terminals (DG85BM only) 6 - Flat Blades Page 2 of 4 Ref: DG85*M 022112JHM www.durakoolrelays.com Sales Department Tel: (888) 847-6552 DG85*M series automotive /industrial relays Fig. 1 Overall Dimensions - Plug-in & PCB Mount types DG85BM 2.4 SPDT 1.2 2.4 SPST-NO 1.2 DG85CM SPST-NO Dimensions in millimeters Page 3 of 4 Ref: DG85*M 022112JHM American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516 www.durakoolrelays.com Sales Department Tel: (888) 847-6552 DG85*M series automotive / industrial relays Fig. 2 Connection diagrams SPST-NO SPDT Specifications are liable to change without notice. E&OE. Page 4 of 4 Ref: DG85*M 022112JHM www.durakoolrelays.com Sales Department Tel: (888) 847-6552