Data Sheet 0635D CRYSTAL OSCILLATORS Rev. A OE-X8GXXXXX Series HF/UHF OCXO Low Power Description: The OE-X8GXXXXX Series of Oven Controlled Crystal Oscillators (OCXO) provides High and Ultra High Frequency with SC-cut stability performance, extremely low phase noise and power consumption, with variety of different output types in a standard 1.4x1” package – “Europack”. 0.50 (12,7 mm) Features 0.25 (6,35 mm) • • • • • • Very Low Power Consumption Very Low Phase Noise Excellent SC-cut Frequency Stability Ultra High Frequency – up to 1 GHz CMOS, Sine-Wave outputs available Stratum3E available Ø0.030 (0,76 mm) TYP 1.00 (25,40 mm) 3 0.70 (17,78 mm) 4 1.07 (27,20 mm) 2 1 5 1.42 (36,1 mm) Creating a Part Number OE – X 8G X X XX X Package Code OE 5 pin 26 x 27mm Temperature Range Supply Voltage Code 5 3 Specification 5V ±5% 3.3V ±5% Temperature Stability OCXO/OCVCXO Option Code X V Specification No V. Control W/ V. Control Output Type Code C S Specification CMOS Sine-wave Code 17 58 28 18 YZ Specification 1x10-7 5x10-8 2x10-8 1x10-8 Yx10-Z Code A B C D E F Specification 0°C to 50°C -10°C to 60°C 0°C to 70°C -20°C to 70°C -30°C to 70°C -40°C to 80°C 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com Data Sheet 0635D CRYSTAL OSCILLATORS Rev. A OE-X8GXXXXX Series HF/UHF OCXO Low Power Specifications Parameter Symb Condition Min Typ Max Unit Note Absolute Maximum Ratings Input Break Down Voltage Storage temp. Contr. Voltage Vcc -0.5 5.5 V Ts Vc -40 -1 85 9 °C V 30 30 200 1,000 MHz 3.465 5.25 90 160 V Electrical Frequency Range F Input Voltage Vcc Input Current Icc Frequency Stability Calibration Load ΔF/F ΔF/F Duty cycle Rise/Fall time Logic "1" level Logic "0" level Tr/Tf Voh Vol Output power P Start up time Phase jitter Ts 3.135 4.75 vs. Temperature vs. Vcc aging As shipped, 25ºC CMOS Sine @50% 20 to 80 % CMOS CMOS Sinewave Into 50 Ohm 0 4 Sine CMOS, Sine Spurious Harmonics SSB Phase Noise Sine-wave @10 Hz @100 Hz @1 KHz @10 KHz @100 KHz @10 Hz @100 Hz @1 KHz @10 KHz @100 KHz SSB Phase Noise Vc MB 3.30 5.0 3 7 2 0.4 0.2 -45 dBm -30 -100 -125 -140 -160 -165 -80 -100 -120 -145 -150 > 10KOhm 0 100 Hz Vc=0V to 3.3V,25°C mA ±50 ppb ±2 ppb/V ±0.1 ppm/year ±0.5 ppm ±0.1 ppm 15pF/10KOhm Internally AC-coupled 50 Ohm 45 50 55 % 3 ns 0.9Vcc V 0.1Vcc V 1σ Subharmonics Input Impedance Control voltage Modulation bandwidth Deviation CMOS Sine-wave ±0.5 10 1 0.4 -40 none -60 -25 ms ps dBc dBc dBc dBc/Hz dBc/Hz 3.3 3 5 @ 100 MHz, 3.3V @ 622 MHz, 3.3V See chart First Year 15 years CMOS CMOS 3.3V 5.0V 100 Hz to 20 MHz 12 KHz to 20 MHz F>250MHz F< 250 MHz @100 MHz @622 MHz; Sine V Contact Factory for wider MB ±1.0 ppm 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com Data Sheet 0635D CRYSTAL OSCILLATORS Rev. A OE-X8GXXXXX Series HF/UHF OCXO Low Power Environmental and Mechanical 0°C to 70°C , -40°C to 85°C, see chart, page 1 Operating temp. range Per MIL-STD-202, Method 213, Cond. E Mechanical Shock Per MIL-STD-883, Method 1011, Cond. A Thermal Shock Per MIL-STD-883, Method 2007, Cond. A Vibration 260°C for 10 s leads only Soldering Conditions Hermetic Seal Leak rate less than 5x10-8 atm.cc/s of helium Electrical Connections Pin Out Pin #1- Voltage Control ; Pin #2 – Vref ; Pin #3 – Vcc; Pin#4 – Output, CMOS or Sine; Pin#5 - GND 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com