Card Connectors Series FMS 8 Pin SIM Card Reader (Manual) with Separate Switch Part Number Reader (Details) Insulation resistance: Withstanding voltage: Contact Resistance: Current Rating: Voltage Rating. Operating Temp. Range: Mating Cycles: >1000 MΩΩ Min at 500V DC 250V ACrms/Minute 50mΩΩ, 100 mΩΩ max. 0.5A 5.0V rms -55°C to +85°C 10,000 insertions FMS008 - 4000 - * - EDC Series No. SIM Card Reader Specifications Design No T = Top Mount R = Reversed Mount Materials and Finish Features Insulator: Contact: Plating: Contact area: Number of contacts 8 (SIM type) Top and reversed mount versions available Separate switch can beused as option Packaging for Tape and Reel: 900 pcs. per reel LCP CuSn6 1.0µm Ni over all, Au plated, Soldering area Sn plated Part Number Switch (Details) Specifications Insulation resistance: Withstanding voltage: Contact Resistance: Current Rating: Voltage Rating. Operating Temp. Range: Mating Cycles: >1000 MΩΩ Min at 500V DC 250V ACrms/Minute 50mΩΩ, 100 mΩΩ max. 0.5A 5.0V rms -40°C to +85°C 10,000 insertions Materials and Finish Insulator: Contact: Plating: Contact area: LCP CuSn6 1.0µm Ni over all, Au plated, Soldering area Sn plated Outline Connector Dimensions (Reverse Mount Type) FMS008 - 4000 - SW * * - EDC Series No. Design No T = Top Mount R = Reversed Mount 1 = Bar = 0.1mm 3 = Bar = 0.3mm Features Number of contacts 1 Operates normally in an open position Top and reversed mount versions available Two different thicknesses of bar available Packaging for Tape and Reel: 1,200 pcs. per reel Recommended PCB Layout (Reverse Mount Type) SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors A-63